HITACHI NW-65FS Fully Automatic Washing Machine User Manual
- June 1, 2024
- Hitachi
Table of Contents
- HITACHI NW-65FS Fully Automatic Washing Machine
- Specifications
- Product Usage Instructions
- FAQs
- Features
- Safety Precautions
- Installation
- Before Using Your Machine
- Control Panel
- Program Description
- Wash in Your Favorite Way
- Troubleshooting
- About the drying time
- Product Specifications
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HITACHI NW-65FS Fully Automatic Washing Machine
Specifications
- Brand: Hitachi
- Model: NW-65FS/FSP
- Type: Fully Automatic Washing Machine
- Features: Deep Penetration Wash, Tangle-Free Finish
Product Usage Instructions
1. Before Using Your Machine:
Make sure the washing machine is properly installed following the installation guide provided in the manual.
2. Use Guidelines:
Refer to the technical description in the manual for detailed information on the control panel and program selection.
3. Checking Amount of Laundry and Detergent:
Follow the guidelines provided in the manual to determine the appropriate amount of laundry and detergent for each wash cycle.
4. How to Use Liquid Detergent, Bleach, and Fabric Softener:
Refer to the instructions on how to add liquid detergent, bleach, and fabric softener to the designated compartments in the washing machine.
5. Selection of Laundry Program:
Choose the appropriate laundry program based on the type of clothes being washed. Refer to the program description for more details.
FAQs
- Q: Can I use concentrated powder detergent with this washing machine?
- A: Yes, please use concentrated powder detergent for washing as recommended by the manufacturer.
- Q: Is it possible to perform infiltration washing on all laundry programs?
- A: No, the infiltration washing cannot be performed on Wool, Blanket, Speedy, and Tub Clean programs due to the lack of detergent dissolution course in these processes.
- Q: What should I do if the laundry rearrangement feature is not working?
- A: Ensure that the washing capacity is between 1kg and 4kg as specified in the manual for proper functioning of the tangle-free finish feature.
“`
USER MANUAL
HITACHI FULLY AUTOMATIC WASHING MACHINE
Model NW-65FS/FSP
Thank you for your purchase of Hitachi Fully Automatic Washing Machine.
· Please read this manual carefully for proper operation.
· Please keep this manual for future reference. · ·
Features
The number next to the sign is the page number for detailed description.
Deep Penetration Wash
Infiltrate the detergent inside the cloth to detach the dirt off the cloth
fiber.
The detergent dissolves sufficiently to become the high-concentration
detergent that washes the laundry in infiltration mode for easier detachment
of dirt off the cloth fiber.
1 2 3 4 Put detergent in, adding some water
Make the detergent dissolves fast by
The detergent dissolves inside the cloth
Three-step washing
The detergent put in at the
rotating the spinning
Inject a little water, and the dirt will
dispenser will fall below the
basket.
The concentrated detergent dis-
detach with the high-concentrated
pulsator.
solves with the power agitating of
pulsator, and infiltrates sufficiently
inside the cloth.
detergent; inject more water to the
normal water level for washing.
Detergent Dispenser
Outer Tub
Pulsator
Stainless-steel Tub
Please use concentrated powder detergent to wash.
The infiltration washing can’t be performed to the processes of “Wool”,
“Blanket”, “Speedy” and “Tub Clean”. (Because of
no detergent dissolution course in these processes) ( )
Tangle-Free Finish
Loosen the post-spinning laundry for easy taking out.
The laundry rearrangement may be out of service in the case that the washing
capacity is less than 1kg or more than 4kg. 1kg 4kg
The laundry rearrangement doesn’t perform in the case of manual setup of
“Rinse”, “Spin” or “Spin Only”. “”””””
3
Safety Precautions
Please read this part of substance carefully for proper operation before using your machine.
· The washing machine is not to be used by children or persons with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or
instruction.
The precautions stated here are classified as “Warning” and “Attention”
according to the damage and the emergency
caused by misoperation, and are described respectively in line with the marks
below “”””
Warning
With no respect to this mark, the misoperation may cause death or GBH.
Attention With no respect to this mark, the misoperation may cause body harm or object damage.
Graphic mark
This mark indicates the content of warning or attention.
This mark indicates the prohibited action.
This mark indicates the compulsory action to be carried out.
Warning
Dismantling
Prohibited
Dismantle, repair or alterations should only carried out by professional technicians.
· Avoid electric shock, fire, and body injury due to
improper activity.
Power
Please use the single socket with
220V, 13A specification. 220V 13A
· The share of the same socket with
other electric appliances may cause
fire due to excessive heat.
24
Grounding
This washing machine is equipped with the electricity wire with bielectrode grounding plug, please use the bi-electrode grounding socket. The creepage protector shall be used if possible.
· To prevent electricity leak which may cause injuries.
Electricity supply must be unplugged with dry hands.
Wet hands Prohibited
· Otherwise, this may cause electric shock.
4
Washing machine should not be
installed in humid place or in places
exposed to wind and rain.
Humid places
prohibited
· Otherwise, electricity leak causing electric shock or fire may occur.
Do not put water in direct contact with the unit during maintenance and
repair. Prohibited
· This may cause short circuit or electric shock.
Warning
Prohibited
Do not put your hand into the basket
until it has stopped completely.
· Even when the spinning of the basket is slow, there is still a danger
of being caught in the motion,
resulting injuries. Particular attention
should be paid when children are
around.
Prohibited
Damaged or loosen wire or plug
should not be used.
· Otherwise electric shock, short circuit or fire may take place.
· If the power supply cord is damaged, Please repair it in a repair shop
appointed by the manufacturer or its service
agents in order to avoid a hazard.
Prohibited
Do not put your hands into the washing · spinning basket during the
washing and rinsing process.
· Even when the spinning is slow, hands may be trapped by
clothes. If necessarily, please press pause button, and put
your hands into the basket after it has stopped completely. ( )
Prohibited
Do not damage wire.
Do not damage or alter the wire forcibly bend, pull, twist or handle the wire.
Beside, please do not put weight on or trap the wire.
· Damage of wire may cause electric shock or fire.
Keep child away from the spinning
basket and do not place box or shelves
next to the washing machine. Prohibited ·
· Children should be supervised to ensure that they do not play with the
appliance.
· Children may fall into the basket resulting in injuries. ·
Thoroughly wipe the power plug when
dirt is adhering the prong or around
the base of the prong.
Clear
· Failure to do so may cause a fire.
This washing machine is strictly prohibited to get close to the locations with
candle, mosquito-
No smoke or fire repellent incense, dog-end or other
kinds of open flame.
Prohibited
Do not put gasoline, benzine, alcohol, thinner of fabrics with these stains into or near to the washing machine.
· To avoid injuries caused by the lock
damage.
· To prevent fire or explosion which may cause injuries.
5
Safety Precautions (continued)
Warning
Do not insert a screwdriver into the Lid
Lock hold.
Prohibited
· To avoid injuries caused by the lock damage.
Do not open the lid in locked status by force.
· Otherwise, the lid or locking device may
Prohibited
be damaged, resulting in unstoppable spinning of washing · spinning basket
and thus causing injuries.
Do not wash large folded washings such
as a blanket.
Prohibited · Folded washings will destroy the balance during the spinning to
cause abnormal vibration. The abnormal vibration during the spinning will
eject the washings, resulting in the damage
of the washing machine, the wall, the floor and the clothes.
Blanket Bedsheet
Waterproof mattress and other clothes
Do not use a mesh of 40cm or more on
one side of the washing machine. 40cm
Prohibited
· This will bring abnormal operation, which may cause the washings to be
concentrated on one side of the washing · spinning basket and the machine to
fail to operate. ·
Do not wash, rinse and spin thick and hard
objects such as waterproof mattress, cloth,
clothes, stepping pad and entrance mats as
Prohibited
well
as
water-resistant
fiber
products
and
carpet.
In case of abnormal vibration, although the safety device is started, the
washing machine can’t stop operating
immediately due to the running washing · spinning basket. ·
Attention
Do not pull the wire from the
socket when unplugging the unit. Prohibited
Do not stand on or put weight on the
top of the unit. Prohibited
· To avoid electric shock or fire cause by
short ciruit may result.
· Otherwise, deformation and damage
may result causing injuries.
Do not connect to the hot water supply. And, water of above 60oC should not be
used for washing.
Prohibited
60oC
· Electric shock or leakage may occur due to deformation of plastic parts
of the unit.
6
Keep hands and feet away from the
bottom of the washing when it is
operating.
Prohibited
· Parts in motion beneath the
unit may cause injuries.
Attention
Please unplug the unit when not using the unit for a long period of time.
· Electric shock or leakage due to aging of insulator may cause fire.
Water supply hose should be tightly
screwed to the unit.
water leakage
Check water supply hose connection by turning on the water before
· Failure to do so may result in water leakage.
washing.
water leakage
· Used for a long period of time, the unit may result in water leakage
caused by loosen union nut. So please check it in time and
· Improper connection of water supply hose might cause water
leak or unexpected damage.
screw tightly again.
water leakage
When installing the washing machine, be sure to hang the water drainage hose.
· If water drainage hose is not hung up, the remained water inside
will flow out and result in unnecessary loss.
Electricity supply must be unplugged with dry hands during maintenance and
repair.
· Otherwise, electric leakage causing injuries may occur.
Please turn off the water tap when not using the unit.
water leakage
· To prevent damages caused by water leakage.
Do not wash, rinse and spin the water
proof fabric or cloth.
Prohibited
( ) sleeping bag, raincoat, cover of skiing, utilities, bicycles, cars and motors
· Otherwise may lead to injury by abnormal vibration during spinning or damage the washing machine, wall, floor and clothes.
Prohibited
Do not incline installing the washing cap. Do not use the washing cap except
Wool program, Blanket program.
· Splash of water may occur or washing cap may be swung out of the basket.
In case when the washing machine is used in places other than ordinary
households.
· If the washing machine is in use for extremely long periods of time compared
to ordinary household usage, such as in dormitories and hospitals, it may be
necessary to change parts (such as the clutch, belt or sealed pad) more
frequently. In this case, consult with the dealer from whom you purchased the
washing machine and have the machine inspected periodically. , , ( ) ,
This appliance is intended to be used in household and similar applications
such as:(IEC 60335-2-7) staff kitchen areas in shops, office and other working
environments; farm houses; by clients in hotels, motels and other residential
type environments; bed and breakfast type environments; areas for communal use
in blocks of flats or in launderettes. , (IEC 60335-2-7)
7
Installation
Installation of Washing Machine
Where to install
Please install on a solid horizontal surface.
· Installation on a slippy or irregular surface may result in noise and
shaking.
· The washing machine having ventilation openings in the base. The washing
machine bottom must not be obstructed by carpeting when the washing machine is
installed on a carpet floor.
Solid, horizontal surface Weak surface
Irregular surface
Avoid installing the unit too close to the wall.
· This is to prevent abnormal vibration and noise.
NW-65FS
NW-65FSP
How to install
The unit should be installed on a flat horizontal surface. Otherwise sudden
stop or abnormal sound may result during the spinning cycle.
8
Installation of Washing Machine
1 Adjust the instability of the washing machine with adjustable leg.
Fixed leg Adjustable leg
2 Please make sure of the horizontality of the washing machine.
· As shown in the figure, the horizontality can be easily
observed by the string used to hang an object.
It is level if the
A
clearance between
A and machine body
is the same with that
between A and the string
machine body.
A A
A
object
(front or
profile)
Inspection of trial run
Put some water into the washing barrel and reconfirm its
horizontality.
B
C
· The ground is level if all front, rear, left and right height difference between
the spinning hole and water surface are less than 3mm.
(B C ) 3mm
Confirming the machine type of NW-65FSP, please install the water drainage
hose and hang it on, otherwise there will
be no water in washing basket. NW-65FSP
10
How to Use the Adjustable Leg
1 Loosen the lock nut by unscrewing in arrow direction 1 before using the adjustable leg to stabilize unit. 1
2
After adjusting of the unit, tighten
the lock nut by screwing it in arrow
direction. 2
Tightening
Loosening
Elevating
Lock nut
Adjustable leg
Lowering
Plastic base
Lock nut
Tighten the lock nut until it reaches the plastic base.
At most 40mm 40mm
Maximum adjustable
range is 40mm. 40mm
9
Installation Guide (continued)
How to Install the Water Drainage Hose NW-65FSP
1 Connect the water drainage hose with the water drainage joint on the back of
the
body. · Fully insert it into place to avoid leakage.
2 After the connection is completed, please use hose clipper to clamp the
water
drainage hose to avoid fall-off.
Water drainage hose
Water drainage joint
3 4 1Insert the fixing holder of
Pull the water drainage
water drainage hose into
hose straight, concave
mounting hole.
to fix into the fixing
holder of water
2As shown in illustration,
drainage hose.
rotate the fixed leg for 90 degree into hole.
90
Hose Clipper
Water drainage hose from the right or (left) side of the unit.
1m
1Insert
22RRoottatee
Fixing holder
Concave
Attention
· To avoid direct draining due to the fallen water drainage hose, the water
drainage hose must be used only after installing into fixing holder, and its
hanging height should not exceed 1m. 1
· Do not release the water drainage hose lest the water is splashed.
· Do not use extended water drainage hose.
· Do not immerse the U-shaped hose on the tail of the water drainage hose in
the water. U
· When using it in winter, to prevent icing, please release the water drainage
hose after using and place the its tail in water container such as basin, set
the washer to single dehydration mode and drain the remained water. 40 40
· Be sure not to install the water drainage hose at a position lower than
water
drainage joint, otherwise, it could lead to difficulties in water drainage.
This discharge pipe installation method is only suitable for NW-65FSP. NW-
65FSP
10
Unplug U-shaped hose and insert into water drainage hose. U
Water drainage hose
How to Change the Water Drainage Hose NW-65FS
Water drainage hose is attached on the left side of unit at shipment,
nonetheless, it can be
reattached on the right side to suit drainage needs.
1 Lay the unit down slowly. · Lay the unit down on some corrugate paper to
prevent damage.
2 Pull out the water drainage hose from the right side of the unit.
Back
The water drainage hose pulled out (right)
Corrugate paper etc.
Black mark
The water drainage hose pulled out (left)
The water drainage hose Front
3Hose retainer
1 Remove the right water drainage hose cover (The cover can be disposed).
2 After pulling out the”Black”mark of the water drainage hose from the left
groove of the unit , the “Purple” mark of the water drainage
should be inserted into the corresponding
groove of the right unit. “” “”
3 The water drainage hose should be pulled out through the proper hose
retainer when the hose
is pulled out on the right.
1
2Purple mark
Water drainage hose outlet
Attention
The black or purple mark of the water drainage hose should be inserted into
the corresponding groove of the unit.
· Water drainage hose which inserts into the unit, can’t touch other parts, to
prevent the damage caused by water leakage.
· Water drainage hose retainer must be tightened.
· The inner section of the water drainage hose must be secured by the retainer
before fetched out.
When fitting the water drainage hose to the water drainage outlet
If the water drainage outlet is too shallow
or the end of the water drainage hose
touches the grounds, cut the end of the
water drainage hose in an oblique angle.
· Failure to do so may cause insufficient rinsing or unit
malfunction due to poor drainage
or too much subbles during
rinsing and spinning.
Water drainage hose
Water drainage outlet
This discharge pipe installation method is only suitable for NW-65FS. NW-65FS
11
Installation Guide (continued)
Installation of the bottom plate
The base plate is placed on the packaging foam on the top of the washer.
1 Lay the unit down slowly. Lay the unit down on some corrugate paper to
prevent damage.
2 Align the hook on the base plate with the square hole on the chassis and
insert it, then tighten the screw.
(Suitable in NW-65FS) ( NW-65FS)
Back
Screw
Back
The water drainage hose Front Corrugate paper etc.
(Suitable in NW-65FSP) (NW-65FSP)
Screw
Front
Corrugate paper etc.
How to Install the Water Supply Hose
Connecting the water supply hose to the main unit
Firmly tighten the union nut when connecting the water supply hose to the main
unit.
· Loosely tightened union nut will cause water leakage.
· When removing the hose, unscrew the union nut first.
Extended the water supply hose
Please use optional extension tube for lengthening the water supply hose.
One standard of extension hoses (3m) are available.Please inquire distributors
for extending the water supply hose. 3m
12
Installation
Please check before operation/
Improper connection of water supply hose might cause water leak or unexpected
damage. · In the course of time, there might be a risk of water leak due to
aging of sealing material or rusting of metallic
parts.
How to install and remove the water supply hose
Water tap
Installing
Tighten
by hand
Water supply hose
Please connect the water supply hose to an appropriate water tap and tighten it by hand only. Do not use pliers or other tools, it might cause damage to the water supply hose.
· Please use the water supply hose supplied with the washing
machine.
Removing
1 Turn off the water tap.
Turn off
Main unit
Turn the union nut in the direction as shown by the arrow and firmly. Connect
it to the water supply opening.
Attention
Firmly tighten the union nut when connecting the water supply hose to the main
unit.
· Failure to do so may result in
water leakage.
Water supply hose
2 Press the start button and let the unit run for about ten seconds. 10 · This
is to prevent water splash when removing the tap.
3 When removing the hose, unscrew the union nut first.
· Loosely tightened union nut will cause water
leakage.
· When removing the hose, unscrew the union
nut first.
· Please note that water supply hose should
be used.
· The appliance is to be connected to the
water mains using new hose-sets and that
old hose-sets should not be reused.
· Pressure of tap water
0.03MPa~0.8MPa(0.3kgf/cm2~8kgf/cm2)
13
Installation (continued)
Appropriate water tap
Horizontal thread taps as shown below.
Horizontal thread tap
Square mouth tap
Universal household tap
Swivel tap
Before Using Your Machine
Preparation for washing machine
When the first using
The washing machine can be used only after the proper installation compliance
with the “Installation Guide”.
Daily using
1 The U-shaped hose on the tail shall be tightly secured. (Applies to NW-
65FSP) U ( NW-65FSP) The front of the water drainage hose must insert in the
water drainage outlet. (Applies to NW-65FS) ( NW-65FS)
2 Connect the water supply hose and turn on the water tap.
3 Insert the power plug into the socket.
(For NW-65FSP) ( NW-65FSP)
Turn on
Water supply hose
(For NW-65FS) ( NW-65FS)
Turn on
Water supply hose
220V~ 220V
Fixing of the water
drainage hose
Drainage
outlet
220V~ 220V
14
Before Using Your Machine (continued)
Preparation for laundry
Secure strings and pull zips up before putting laundry into the washing
machine. (beneficial suggestion) ( )
· This is to prevent damage to
clothes and zips.
The laundry from which the hair or silk is inclined to run shall have its
inner side turn to external before washing.
Please remove soil or dirt from laundry before washing.
Make sure the decoloring possibility
· Please make sure the decoloring possibility of the laundry. Dip the white
towel with the detergent, use it to wipe the inconspicuous part of the
laundry, and observe whether the towel is attached with color. Don’t wash the
laundry that decolors.
Remove anything from the laundry before washing. Do not forget anything in
pocket (matches, hairpins or coins etc.).
· To avoid damaging the clothes
and unit malfunction.
Clothes of easily-fadeaway colors must be separated.
· The bluejeans that are inclined
to fade may decolor during washing.
The vulnerable laundry shall be put into the wash string bag before washing.
To be cautious, please put the laundry with lace or the woman underwear with
steel wire into the optional wash string bag before washing.
· Prevent the laundry from dam-
aging by accident.
How to put laundry in
The laundry from which the silk is inclined to run shall be put into the
string bag before washing.
The laundry made of corduroy or other particular cloth, and the black hose or
other clothing sensitive to silk-running shall be put into the optional
antisilk-running string bag before washing.
Please handle the dirt as early as possible.
As it’s hard to remove the dirt after adhering to laundry for long, the dirt
shall be under clean out and handling with detergent before washing, which
brings better washing effect.
Put bulky or floating laundry in basket first.
· It smoothes rotation of the laundry.
· Prevent splashing of water.
Jean
Bedsheet
The bluejeans and other thick cloth shall be evenly distributed in the washing
basket before washing. (Prevent the laundry from overflowing during washing)
· Prevent splashing of water.
15
Use Guidelines
Do not remove the plug of power supply during the operation. · Lest the
washing machine will be in trouble.
Make sure the operation is suspended or the power supply is cut off before
removing the plug.
Do not add excessive amount of detergent. · Excessive detergent won’t improve
the wash-
ing effect much. · Instead, it will cause insufficient rinse and lead to some
problems due to excessive foams.
Don’t be close to television or radio. · It may interfere with the television
or radio.
The power supply switch is in ineffective condition after the power supply is
cut off and before the Mode LED extinguishes. · To switch on the power supply,
it is recom-
mended to press the power supply switch again after the LED extinguishes.
Attention on dewfall. · Since the humidity is high in summer, there
will be dewfall outside the washing machine when washing with cool water,
which may damp the floor. Please pay attention to it.
Attentions in continuous operation. · Manually set the washing time as “12
min-
utes”, operate the washing machine for over 3 consecutive cycles, the
protective mechanism may work and stop the motor. “12 ” 3 · If continuous
operation is necessary, please restart the operation of the washing machine
after 30 minutes more or less. 30
Do not put in excessive clothes. · It may cause overflow of the clothes during
washing. The placement of washings please see page 15. 15
After spinning, the lock-in function of the lid is unlocked, but the basket
will remain rotating for over 15 seconds.
15 · Stop use immediately and please request re-
pair.
Do not use sharp-edged article to press the buttons.
· Lest the buttons be damaged or in trouble.
When washing the thick clothes such as jersey, the oblique of the clothes in
the basket is
liable to cause the security problem.
16
Technical Description
The number next to the sign is the page
number for detailed description.
Water Inlet
41
Water Drainage Hose
(Applies to NW-65FSP) (NW-65FSP)
Lid
Water Drainage Hose (Applies to NW-65FS) (NW-65FS)
Bleach and Liquid Detergent Dispenser
22
Control Panel
18
Powder synthetic detergent directly into the Washing Spinning Tub
Washing Spinning Tub
Pulsator
Fabric Softener injection hole
22
Power Cord
Lid Lock
20
Lint Filter
39
Adjustable Leg (Height of the front leg can be adjusted) ()
9
Accessories (Refer to”Installation Guide”) ( )
Water Supply Hose
Base Plate (Screws include) ( )
Water Drainage Hose
Fixing Holder of Water Drainage Hose
(One) (1 )
(Applies to NW-65FS) (Applies to NW-65FSP) ( NW-65FS) ( NW-65FSP) (One) (1 )
(One)(1 ) (Applies to NW-65FSP) ( NW-65FSP)
(One)(1 ) (Applies to NW-65FSP) ( NW-65FSP)
17
Control Panel (NW-65FSP) NW-65FSP
Preset Button
The button is used to preset the operation time. 30 30
The washing process can be set to finish in six or nine hours. 69 Pre-defined
operation can work in “Normal” and “Mini”, “Heavy”, “Speedy” , “Soak” but not
for other modes.
21 21
Washing Process Indicator
(Setting injection rinse in NW-65FS) (NW-65FS)
Water Level Button
Wash Rinse Spin Button
Clean Button
Set the Tub Clean and Tub Dry.
Air Jet Button
Used to set the air-jet duration.
ause
Water Level
36~37 36~37
Attention
· Never press 2 (or more) buttons together, which may cause misoperation.
2
18
Water Save Indicator
The lamp will light when setting the program of “Normal”, “Delicate”, “Wool”,
“Speedy” and “Mini” auto running.
If setting “Water Level” or “Washing Indicator” in above program manually, the
lamp will put off.
Preset/Air Jet Indicator
Please select the proper air-jet duration in compliance with the air-jet level
required to the laundry. The indicator lights to describe the air-jet
duration.
Dry for 1 hour (Flash) 1
Dry for 2 hours (Flash) 2
Program
Normal
Delicate
Blanket
Heavy
Mini
Soak
Wool Speedy
Program Button
eight
Start/Pause Button
24 8
24 Program
ause
Power Switch
45 45
In the case of any of the following manual setup, the washing machine will
make 2 sounds for acceptance (to announce the datum
mark of indication): 2 ( )
1 The water level is “50L”; 2The washing duration is 15 minutes (“9 minutes” +
“6 minutes”). 3 Rinsing duration is “twice”; 4 The spinning duration is “6
minutes”; 5 The preset duration is “9 hours later”; 6The program switches to
“Normal”; 7Air Jet to “2HR”; 8 “Clean” to “Tub Clean”. 1 50L2 15 (9 +6 )3 2 4
6 5
9 6 7 2 8
19
Control Panel (continued)
Lid Lock Function
The lid will be locked automatically when washing for children’s safe.
Attention · With the set of Lid Lock function, the washing machine can’t
operate if the lid is opened. (The control
panel will release the alarm if the lid is opened) ( )
Factory initial state for “safe mode”. “”
Remove Safe Mode
1 Press “Power On/Off”button
.
/
2 Press and hold down the” Wash” button can be removed.
for at least three seconds, then the safe mode
3
· Press and hold down the “Wash” button
for at least three seconds again to set the safe mode.
3
3 Cut off the power supply.
When you want to open the lid
Press “Start/Pause” button
Lock will be removed automatically after washing. Lid can be opened.
/
When beginning again
With the set of safe mode, the lid will be locked as the washing machine
restarts.
Without the set of safe mode, the lid will be locked automatically during the
course spinning.
How to switch off the buzzer sound
Follow the below steps to switch off the buzzer sound after the completion of
washing process.
1 Press the power button.
2 Press and hold down the “Start/Pause” button for at least three seconds, the
buzzer sound can be switched off. / 3 · You can press and hold down the
“Start/Pause” button for at least three seconds to recover the beeping. / 3
20
Checking Amount of Laundry and Detergent (Approximate Amount)
Checking amount of laundry
Select the program required for washing after put in the laundry, and press
the “Start” button. The sensors begin to detect the weight of laundry, and the
necessary detergent amount (approximate amount) and water level are displayed
correspondently. (The detection is not included in the program of “Delicate”,
“Speedy”, “Wool”, “Blanket”, “Mini”,”Dry Clean” and “Air Jet”.)
1 Put the laundry in, turn the power ON, choose the appropriate pro-
gram, and press the Start button.
2 Display the necessary detergent amount and water level.
The indicator lights to show that the water levels on the left column are
selected.
The indicator flashes to show that the water levels on the right column are selected.
· The pulsator rotates with absence of water
to check the washing load (cause no dam-
age to clothes)
3 Put the detergent in. ( 22~23) 22~23
· Put detergent fabric softener bleach and close the lid.
· After the display of the detergent amount and water level, please add in
detergent in thirty seconds, and close the lid, otherwise it will sound alarm.
(at that time, if the “Water Level” button is pressed, the washing machine
will not wait any more and start rotating) 30 “”
· After the washing basket is filled with water or begins operating, the
replenishing detergent shall be thrown into the basket directly.
Amount of detergent (Approximate amount)
The display of detergent amount (approximate amount) refers to the amount
added with the measuring spoon in the package of concentrated power detergent.
· The usage benchmark of detergent amount (approximate amount) is the capacity
of one
measuring spoon (about 37g). (Other detergent 23) 37 23
· The capacity of measuring spoon depends on the brand of detergent, so please
refer to the
description on the detergent package.
· The diagram example of detergent measuring spoon only stands for the
approximate amount.
Please put in the detergent as much as 80% of the capacity of measuring spoon
(about 30g). 80% 30
21
How to Use Liquid Detergent, Bleach and Fabric Softener
Liquid detergent/Bleach /
Liquid detergent Dilute the liquid detergent with water and gently pour it
into the injection hole. · When using preset operation, dilute the detergent
with twice the
amount of water.
Bleach Dilute the bleach with water before the washing and gently pour it into
the injection hole.
Fabric softener
1 Turn the side with the fabric softener injection hole to the right position.
2 Pour the fabric softener into the injection hole in accordance with the
indication of water level before the washing starts.
Liquid detergent and bleach
injection hole
injection
hole
Attention · Please do not pour bleach directly onto the items being washed.
Otherwise, it may cause discoloring and damage the clothes.
Powder synthetic detergent
Pour the detergent dispenser on the clothes.
· When you find it difficult to pour the fabric softener into the injection
hole,
push the basket to one side to pour the fabric softener in.
3 Close the cap of the fabric softener injection hole.
· Please note that the cap of fabric softener injection hole should be closed.
4 Fabric softener will be dispensed into the basket during the final rinse.
· Dispensation of the fabric softener is performed automatically by the
rotation of the spinning basket. The fabric softener moves in gradually during
the spinning and reaches the basket before the final spinning.
Fabric softener
Water level
25L 30L 40L 50L
Concentrated type 6
7
9
11
mL mL mL mL
Regular type
17 20 27
33
mL mL mL mL
Notes
· Concentrated detergent: 6.6mL for 30L of water
30L 6.6mL
· Normal detergent: 20mL for 30L of water
30L 20mL
· The concentrated type easily solidifies. Please use twice the amount of
water to dilute such fabric softener.
2
· Once consumption of the softener shall be less than 45ml. Excessive
consumption of the softener instead prevents it from being effective. “” 45mL
· Please do not leave the fabric softener in the basket for an extended period
(12 hours) as the fabric softener may solidify and cause malfunction. ( 12 )
· When the washing machine or the basket is tilted, water may flow into fabric
softener injection hole. (Thus fabric softener performance will be re-
duced) ( )
· Please use an appropriate amount of detergent. Too much fabric softener may
result in poor rinsing and fabric softener performance.
22
Amount of Laundry and Detergent
Amount of Laundry
6.5kg 3.5kg 1.5kg 0.5kg
Water Level
Synthetic detergent
Concentrated detergent
Regular detergent
20g for 30L of water 25mL for 30L of water
(Powder)
(Liquid)
30L 20g 30L 25mL
( )
( )
40g or 40mL for 30L of water
(Powder, Liquid) 30L 40g 40mL
( )
50L
33g
42mL
67g (67mL)
40L
27g
33mL
53g (53mL)
30L
20g
25mL
40g (40mL)
25L
17g
21mL
33g (33mL)
· Please refer to the description given by the detergent manufacturer for the
usage amount and the details of detergent.
· The list of detergent amount (approximate amount) in this table takes the
measuring spoon in the package of concentrated synthetic detergent as
benchmark. (20g detergent for 30L water) 30L 20g
· If laundry is only lightly stained, use only half of the amount of detergent
to be used.
· The excessive usage of detergent brings no more cleanness but the side
effect of insufficient rinsing.
Amount of Laundry
· Laundry load varies according to different taps, sizes and thickness of
cloth. Approximate weight of laundry is shown in ( ).
( )
· When washing normal clothes, the appropriate amount of washing load is about
70 to 80 percent of the amount indicated. In case the agitator stops
which indicates overload, please check and if necessary, adjust the load.
70%~80%
Approximate amount of laundry
Briefs (Cotton 50g) 50g
Long-sleeved vest (Cotton 150g) 150g
Socks (Cotton 50g) 50g
Blouse (Blended materials 200g) 200g
Towel (Cotton 70g) 70g
Shirt (Blended materials 200g) 200g
Bath towel (Cotton 300g) 300g
Pajama(Top and bottom) (Cotton 500g) 500g
Sheet (Cotton 500g) 500g
23
Selection of Laundry Program
The washing machine have eight laundry courses.
Please select the appropriate detergent and course for laundry according to
the table below. 8 : ,
Type of laundry
Recommended Automatic Program
Regular laundry
Normal
Automatically select the program suitable for washing. ,
Mini
Wash small clothes
Heavily stained laundry
Heavy
Use powerful currents to wash.
Soak
Wash with special moving steeped water flow.
Delicate laundry
Delicate
Delicatly wash with soft water current.
Control Panel Display
Clothes wearing for short period of time and without dirt
Speedy
Clean up laundry with fastest mode.
Clothes with dry-clean or dry-
clean and hard wash label
Wool
Delicatly wash with swing current.
Bulky laundry
Blanket
Delicatly wash with rotating current.
Above control panel demonstration content take NW-65FSP as an example. NW-
65FSP
24
Recommended Detergent Pre
Powder synthetic detergent
Liquid detergent
Special detergent used in dothes with dry-clean label Neutral liquid detergent
Press “Start” button
Washing
First Rinsing
Sprinking rinsing
Second Rinsing
Water-storage rinsing
Spinning
Dissolve detergent
Agitating
Spinning after When the spinning
draining
of the basket is
slow, the water sup-
ply is beginning
,
Spinning Supply water Balanced
after draining to the required agitating
level and
performing
agitating
Water-storage rinsing (twice) (2 )
Spinning after
draining
Spinning after
draining
Supply water to the required level and performing
agitating
Balanced
agitating
Agitating
Rotating water+soaking +
Washing
Rotating water+soaking +
Washing
No Rinsing
Draining spinning
Rotating water+soaking +
Rinsing(twice) (2 )
Draining spinning
Rotating water+soaking +
Rinsing(twice) (2 )
Draining spinning
spinning
Draining spinning
spinning
25
Content of the Washing Program
This part describes the process of each program.
( ) indicates it may be manually switched within the range contained in the
bracket by pressing
the buttons. No ( ) means no switch. ( ) ( )
Program Automatic setup
( )
Rated washing capacity
of water level
Washing
Rinsing
Round 1
Round 2
Required duration
Spinning
(approximate)
()
Normal
( ) less than 6.5kg 6.5kg
Delicate
( ) less than 3.5kg 3.5kg
50~25L (50~25L)
40L (50~25L)
Sprinking rinsing
15~12 minutes
Water-storage rinsing
6~3 minutes
(15~3 minutes) (Water-storage rinsing 1~3 times)(1~3) (9~1 minute)
(NW-65FS Water-storage or Water-injection rinsing 1~3 times)(1~3)
Water-storage rinsing Water-storage rinsing
9 minutes
3 minutes
(15~3 minutes) (Water-storage rinsing 1~3 times)(1~3) (9~1 minutes)
(NW-65FS Water-storage or Water-injection rinsing 1~3 times)(1~3)
48~45 minutes (63~25 minutes)
36 minutes (63~22 minutes)
Blanket
( ) less than 4.2kg 4.2kg
50L (50~25L)
25 minutes
Water-storage rinsing
Water-storage rinsing 6 minutes
(9~1 minute)
65 minutes (65~56 minutes)
Wool
( ) less than 1.2kg 1.2kg
30L (30~25L)
9 minutes
Water-storage rinsing
Water-storage rinsing
1 minute
Speedy
( ) less than 1.5kg 1.5kg
25L (30~25L)
3 minutes
no rinsing
3 minutes
(15~3 minutes) (Water-storage rinsing 1~3 times)(1~3) (9~1 minute)
(NW-65FS Water-storage or Water-injection rinsing 1~3 times)(1~3)
Soak
( ) less than 6.5kg 6.5kg
50~25L (50~25L)
60 minutes
Water-storage rinsing Water-storage rinsing
6 minutes
(Water-storage rinsing 1~3 times)(1~3) (9~1 minute) (NW-65FS Water-storage or Water-injection rinsing 1~3 times)(1~3)
Mini
( ) less than 1.5kg 1.5kg
30L (50~25L)
9 minutes
Sprinking rinsing
Water-storage rinsing
6 minutes
(15~3 minutes) (Water-storage rinsing 1~3 times)(1~3) (9~1 minute)
(NW-65FS Water-storage or Water-injection rinsing 1~3 times)(1~3)
Heavy
( ) less than 6.5kg 6.5kg
50~25L (50~25L)
Water-storage rinsing Water-storage rinsing
30 minutes
6 minutes
(30~3 minutes) (Water-storage rinsing 1~3 times)(1~3) (9~1 minute)
(NW-65FS Water-storage or Water-injection rinsing 1~3 times)(1~3)
The above table is based on NW-65FSP. NW-65FSP
36 minutes
12 minutes (45~28 minutes)
100 minutes (122~85 minutes)
37 minutes (42~31 minutes)
64 minutes (79~31 minutes)
Time required for washing
· The washing time includes the time of charging (volume of
15L per minute) and draining (standard condition). 15L
· The washing time depends on the water pressure, washing
loads and drainage condition etc.
· In the “Normal”, “Soak” and “Heavy” programs, the washing
machine determine the optimum washing mode by checking the load and texture of
the washings. The time shown in the above table are ones in standard
condition.(marked with ).
· There are certain errors between the “washing time” &
“spinning time” and the actual operation time. “”””
· Some programs, the washing machine will stir the clothes
after final spinning for fluey effect. (stirring may not be made for some
washing loads.)
26
Change of the options in the Programs
· ( ) indicates it may be manually switched within the range
contained in the bracket by pressing the buttons. ( )
· Options in modes can’t be changed after the completion of
the “washing” process. “”
· Changes can’t be made during the period from the begin-
ning of charging to the time when the level of charged water reach the stated
standard.
Switch of Programs
· Processes can’t be switched after the starting of wash-
ing machine. If it is necessary to switch, please cut off the power supply
first, and then proceed with the switch.
Program Description
Delicate Program
Not suitable for washing laundries below:
After washing
Laundries with Dry clean label and out of hand wash label.
Laundries with fur material except for sweaters of wool. (high-quality cashmere, Angora, mohair and alike)
Prevent the knitted sweater and alike from distorting please pay attention when drying.
( )
Laundries with lace embroidery knitted by special method.
· Woolen sweater can be flattened out
on a lever board for drying and sunning to prevent distorting.
In case of laundries too wrinkle or heavy dry by spinning, please
set shorter spinning time by pressing “Spin” button.
Speedy Program
This program is designed for washing clothes only with sweat but no dirt in
summer.
This program will not rinse in full automatic mode, so no detergent, fabric
softener, bleach are required. If it is necessary to use them, be sure to make
manual setting or select other program.
Wool Program
The”Wool”program applies the mode of basket rotation, which uses the rotating water in the basket to
wash the fine cloth with label and the laundry with label gently.
Please note that the washing cap can be used in”Wool”program
The washing cap is the optional part
· Because this program imitates the dry cleaning that handles the laundry
without external force, please remove the oil con-
tamination, the dirt and the color spot off the laundry.
· Some laundries can’t be washed due to the cloth materials.
· Please use special detergent (liquid) to wash clothes with Dry clean label.
( )
· Please use neutral liquid detergent (liquid) to wash clothes with Hand
washing label.
( )
· Do not use other detergent except liquid detergent.
Do not use Bleach.
· The bleach is of strong alkalinity and will do harm to the clothes.
Pre-defined operation is not available in the “Wool” program.
“”
As to the laundry that highly shrinks after washing, the pattern paper shall be prepared in advance in order to get the laundry back to the original size.
27
Program Description (continued)
Laundries that can be washed
Laundries that cannot be washed
Among the signs of clothes’ washing methods
With Hand wash label With Dry clean label
· The leather craft or the leather decoration
· The laundries with decoration (feather, fur and alike)
· The rayon, the amino-copper fiber and their mixture
· The sweater, the knitted sweater (high-quality cashmere, mohair and alike)
· The trousers, the skirts
· The overall, the shirt, the one-piece dress (silk, flax and alike)
· The school uniform, the sailor uniform
Even the laundry with
label may not be washed.
Please refer to “Laundries that cannot be washed” at the
right side.
“”
· The laundries inclined to decolor
· The necktie, the suit and the overcoat
· The laundries handled with the coating process, the resin process
(with bond), the grain-rolling process (with the raised or sunken patterns) )
· The laundries applied with the forcefully-contorted fiber (forcefully-
twisted wire) such as silk and wool (especially the jacquard and alike)
· The silk, the corduroy and the alike wools
· The laundries with no washing label
Attention
· If the laundry is not included in the above list, please wash it with reference to the detergent specification.
Make the dirt or the color spot easy to remove
Sebum dirt around the collar or the cuffs
The color spot
· As to the dirt around the fringe of collar,
cuffs, lap or pocket, use the brush with
detergent to wipe these positions hard
for dirt removal.
· Underlay the towel at the inner side
of laundry, and use the brush with
detergent to flap gently and remove
the color spot.
After washing
Drying methods
· Sweaters of wool, Angora and cashmere shall be laid in
shady and cool place after dressing to be dried in shade.
· Woolen sweater can be flattened out on a
level board for drying and sunning to pre vent distortion.
· Blouse or one-piece dress shall be dressed and hung in hanger for drying in
shade.
Treatment (recovery of the shrinkage and distortion) ( )
· Hover the steam flatiron over the clothes, release steam and
dress the clothes.
· After spraying sufficient steam, flatten out and dress the
clothes.
paper model
28
Blanket Program
The tub rotates and creates “Blanket washing current” and “Soak” program to
gently wash comforters, blanket and bed spread.
Please note that washing cap can be used in Blanket program. The washing cap
is the optional part.
Washable Comforter
· Comforters filled with synthetic (polyester) fibre.
Quilt (single, less than width 150cm X length 210cm, the weight of the batting
in the quilt less than 1.8kg) Body-contact light quilt (dual, less than width
190cm X length 210cm, the weight of the batting in the quilt less than 1.8kg)
( ) ( 150cm x 210cm 1.8kg) ( l90cm x 210cm 1.8kg)
· Quilt with the interior batting being feather, and with a sign of .
(For example: The batt inside the close fitting comforter is 0.5kg) ( 0.5kg)
Attention
· Don’t wash the comforter with the wool as its batt material inside or the
silk as its cover material.
Washable Blanket
· Blankets with label
· Acryl or Polyester fiber double breadth elastic blanket, looped pile carpet
and woven carpet
(less than 180cm(W) x 230cm(L) and single weight not over than 4.2kg) ( l80cm
x 230cm 4.2kg)
· Please refer to operation manual of electric blanket for the washing of
electric carpet.
Other Washable Items
· Mattress with label
· Pillow cases and cushions filled with synthetic (polyester) fibre
( ( ))
How to put in comforter and blanket
1 Put in the corner first, then the rest of the comforter slowly.
2 To squeeze air out from the inside of the comforter put it in slowly.
29
Program Description (continued)
After washing
Method to take out
· Opposite to the put-in sequence, pull out the
comforter slowly.
Washing
basket
Comforter or
blanket
· The preset operation is not applicable to the
“Blanket” program.
· Scrub away tough stains by liquid detergent
prior to washing.
Natural air dry at the place with good ventilation
(About 4 hours are needed to dry the comforter in sunny days) ( 4 )
· When drying the comforter in sun, the frequent turning-over will
shorten the drying duration. When drying the comforter in sun, the frequent
flap will make the comforter fluffy and comfortable.
· Neaten up the oblique batting in the quilt, make the quilt more dry,
fluey and comfortable. (in order to prevent deterioration of batting and
damage of quilt, please cover the coverlet to protect the quilt) (
)
· When the blanket is still wet, use
the brush to tease the hair towards one direction, so as to keep the
blanket in good looking.
Dry the blanket in ” ” shape so that it can be dried easily.
Air Jet
This program is designed for helping to shorten the drying time after washing.
ClothCelosthneost snuoittasbulietafbolrethfoisr tmhiosdper.ogram
· Clothes that cannot be washed by Wool program.
· Clothes with
sign in washing mark
· Clothes of easily-fade away colors
· Shoes
· Quilt and blanket
· Easily distorted clothes
Using the Preset for Washing
Put the laundry in and press the “Power On/
Off” button . /
Press the “Program” button , select the washing mode.
· With each pressing on the “Program” button, the
indicator will light in sequence.
Press the “Preset” button , set the predefined time.
· Set the time it will take to finish washing from now.
· Predefined time can be switched by pressing the
“Preset” button.
Press “Start/Pause” button
.
Put in the detergent according to the amount
and close the lid.
(The sound of buzzer indicates washing completion.)
· The pulsator to detect the amount of laundry and dis-
play on the control panel. 20
20
· Do not use liquid detergent during preset washing.
Predefined operation can’t be set in “Delicate”, “Wool”, “Blanket”, “Clean”,
“Air Jet” Programs.
30
Using the Preset for Washing (continued)
How to use the “Preset” button (Switched options)
The preset function allows the finishing time to be set to 6 hours or 9 hours
later. This feature comes in handy when you wish to do the washing while you
are out or when you wish to do the washing at night ang hang out in the
morning. 69
Press the “Preset” button to set the washing content.
9 hours later (Light) 9()
6 hours later (Light) 6()
No setup (Darken) ()
In case of the following cases
Fix the preset duration: press the “Preset” button . (With the button pressing
and holding, the preset duration will be displayed) ( )
Cancel the preset duration: switch off the “Power On/Off” button . /
Change the preset duration: switch off the
“Power On/Off” button , and reset. /
Attention
· In predefined operation, do not mix the clothes liable to discol-
oration.
· With the power unplugged or cut, the preset program will be canceled.
· The washing time varies with the change of the load and
texture of the washings and the volume of the charged water.
· To prevent the laundry from corrugating, take it out for drying
as early as possible after the end of washing.
· Please make sure the inhaling window is closed before operation. If the
washing machine operates with the inhaling window open, the water may splash.
Using the Washing Water Again
Use the Washing Water again
1
2
3
Laundry with
slight dirt
Washing only
“Washing” only for the 1st
collective of laundries. “”
Washing Rinsing Spinning
Rinsing Spinning
Put in the 2nd collective of laundries, and select the favorite washing mode.
· Set the proper water level for the laundries.
Rinse and spin the 1st collective of washed laundries.
· Set the proper water level for the laundries.
31
Using the Washing Cap
Attention
It is prohibited to install the washing cap aslant. In addition, the washing cap is prohibited from being used in other
modes except the “Blanket” and “Wool” program.
Prohibited
Lest the splashed water drop or the washing cap bounced out will cause body
injury or damage
of the washing machine.
· When keeping the washing cap, please prevent it from deforming.
· The washing cap is a consumable good. Purchases can be made at authorized
dealers. Refer page 48 for the optional components. 48
Installation of the washing cap
1 Bend the cap as is shown in the figure and then put it in the basket with
the side with letter faced up.
Washing cap
Fit the concave of the
washing cap into the
convexity of the basket
and flatten it up.
2 1Press the washing cap on your side, squeeze the whole cap into the basket. 2Press hard the whole washing cap down and flatten it up.
Push down the
whole cover
1
Push down the cover
close to your body.
Basket
Attention · Please install the washing cap in right way to avoid unnecessary injury.
32
In “Blanket” program
Put the washing cap into the basket, hold the central circle, and pull it
right beneath the balance ring.
Do not clip the clothes when installing the washing cap.
balance ring
Attention
washing cap
central circle
· Do not add any clothes on the washing cap after the
installation of the cap.
Taking out the washing cap
1 Push the washing cap down.
Push
2 As shown in the figure, hold on to the center part and bend it to the arrow direction.
Bend
3 Pull the washing cap out.
Pull the washing cap out
Adjustment of the position and height of the washing cap
In “Wool” program
· The installation position (height) of the washing cap shall be determined by
the type, size, and thickness of the
washings. Please install the washing cap at a height where it could press
against the washings slightly. ( )
· There is a sign of protrusion on the interior wall of the basket, indicating
where the installation position shall
be, which can be used as reference at the time of installation.
· For light and thin clothes such as blouse, towels can be put into the basket
to adjust the height of the washings and avoid
oblique of the washing.
washing cap
Washing waterline washing capacity
30L ~ 25L
less than 1.2kg 1.2kg
Attention
· Do not add any clothes on the washing
cap after the installation of the cap.
33
Air Jet Program
Preparing for Air Jet
Air Jet function helps to shorten the time for laundry airing by using of
strong wind and high-speed spinning. It prevents shrinkage and transfrigure
that caused by heating.
· May be used to dry the heat-irresistible swimsuit or the underwear
containing the amino heat-insulation materials.
· Keep room free of mugginess for causing no temperature rise.
Provide the same drying effect as the airing in the room.
· Maximal 1.5kg of blending chemical fiber can be dried in 3 hours.
3 1.5kg Be able to control the black mildew in the washing basket. (The
program of “Tub Dry” that only dries the
washing basket may be applied to prevent the mildew.) 38 ( ) 38
The drying capacity can be as high as 1.5kg. (Blending chemical fiber) 1.5kg (
)
About 1.5kg of laundries 1.5kg Above the filter net (Well rearrange the post-
spinning wet laundries and put them into the washing basket) ( )
Laundries not applicable to air jet dry
· Laundries not applicable to the washing processes of”Wool”
( 27) ( 27)
· Comforter and blanket
· Shoes
· Laundries inclined to decolor
· Laundries with the
label for washing
· Laundries inclined to be reshaped
Excessive use of detergent may cause
insufficient air jet dry or unexpected corrugations.
Please never handle the waterproof paper or
laundries with air jet mode.
Attention
· Please well rearrange the laundries before putting them into the · The laundries with lining should be set with enough air-dry
washing basket.
duration.
Excessive or poorly-rearranged laundries may cause operation failure.
· If the blending product includes a big portion of cotton, reduce
the amount of laundry in one round of air-dry process or set longer airdry
duration.
Please pause the operation after the operation failure, reduce
In the sensitive case of dust or pollen, please close the doors
the amount of laundry and correct the laundry declination or
enwinding, then press the “Start/Pause” button
. If the
failure remains after repeating the above procedure 2 or 3
and windows before starting operation.
The duration is irrelevant to the air jet level for applying the preset mode.
The amount and type of laundries, the
times, please contact an authorized service dealer.
/
2 3
temperature and humidity, the season, or the installation environment may cause insufficient air jet. Go on with the air jet process in case of insufficient drying.
34
Air Jet Process
Take out the laundries after washing process, rearrange them evenly and put
them into the washing basket.
· The air jet capacity can be as high as 1.5kg.
1.5kg
Operation mode of air-dry program
Spinning
Agitating
Close the lid, and press the “Power On/Off” button . /
Press the “Air Jet” button duration.
to set the air jet
Press the “Start/Pause” button (The
sound of buzzer indicates washing completion) / ( )
· Please prevent the washing machine from shaking
when taking out the laundries. (Water may flow out from the dispenser)
( )
· The preset during is only for air jet process, and the
actual operation duration is 5 to 30 minutes longer for including the duration
of rearrangement and even regulation of the laundries. (Depending on the
preset duration) 5 30 ( )
Recommended Operation Time
The following information is for reference only. Air Jet is only an supporting
feature, helps shorten the time for laundry airing, but it cannot dry your
laundries completely.
Air Jet
1.5kg
1.0kg
0.5kg 90 minutes
Air Jet 0.4kg
1.5kg 1.1kg
1.5kg
1.1kg
0.4kg
400g
60 minutes120 minutes180 minutes 150 minutes
200g
70 minutes
60 minutes 60 minutes 60 minutes 90 minutes 90 minutes
400g 500g
1.1kg
0.5kg
0.5kg 600g
1.0kg
60 minutes 100 minutes 60 minutes 120 minutes 180 minutes
150 minutes
90 minutes 60 minutes 60 minutes 90 minutes
400g 200g
300g
180 minutes 60 minutes 70 minutes
35
Wash in Your Favorite Way
Any of the programs of “Washing”, “Rinsing” and “Spinning” can be set up
alone, and the programs can also operate in combination. (The content of the
washing will not be stored) ( ) Attention
· Except the “washing rinsing spinning” and “washing spinning”, when other
washing modes are set, no stirring of
the washings will be made for loosening clothes after the completion of
drainage. “”””
In the following cases
Set washing modes by
pressing the buttons
Wash in the favorite way
WashingRinsingSpinning
Use the detergent again
Washing only
No need to spinning after rinsing
WashingRinsing
To rinse the washed laundry
Rinsing only
To rinse and spin the washed laundry
RinsingSpinning
To drain the water out of the washing basket or to spin before drying
Draining only, spinning only
36
Power
Press the power button
Select the “Normal” program
Select the water level
The sensor will fix the water level automatically in the case of no set to
water level.
Select the water level
Automatically set to “50L” in the case of no set to water level. 50L
After draining
and spinning, it
begins to add
water for rinsing.
Select spinning “1 min.” when draining only.
“1”
Water Level
Level
Water
Wash
Wash
Rinse
Rinse
NW-65FSP
Spin
Spin
Water Level
NW-65FS
Only “25L” and “30L” can be selected in “Speedy” and “Wool” program. “25L””30L” Only “50L” can be setted in “Tub Clean” program. “50L”
Manual setting can’t be made in “Soak”, “Wool”, “Blanket”, and “Tub Clean”
program.
Setting 30 minutes only can be made in “Heavy” program. 30
Manual setting can’t be made in “Wool”, “Blanket” and “Tub Clean” programs.
Manual setting can’t be made in “Wool” and “Tub Clean” programs.
End The buzzer sounds when the program ends.
Press the
“Start/
Pause” button
Operation stops if the detergent remains.
Operation stops if the rinse solution remains.
Operation stops if the rinse solution remains.
37
Maintenance of Washing Tub (Tub Dry · Tub Clean) ·
Attention · Please never put laundry into the washing tub during the course of
Tub Dry and Tub Clean.
Tub Dry Program
Frequent air jet to the washing tub may prevent the mildew. (Applied
frequency: once a week) ( 1 ) The process of “Tub Dry” is the same applied as
that of “Air Jet” process. ( 34) “” ( 34) Press the “Clean” button , and set
the option as “Tub Dry” to start operation. (Operation is as long as about 30
minutes) ( 30 ) The black mildew can be cleaned with the common oxidized
bleacher.
Tub Clean Program
It’s hard for the soap alkali residue and the mildew to adhere to the
stainless steel tub, but the soap alkali residue may come into being after
long usage. Please perform the regular maintenance, and clean the washing tub
bimonthly. 2
Press the “Power On/Off” button /
Press the “Clean” button Clean” program.
, select the “Tub
Press the “Start/Pause” button
/
· Final spinning is made after washing (stirring, stop)
120 min and water storage rinse 2 times. 120 2
· The detergent is the oxidizing bleacher sell in the
city. Please infuse 250g (about one bottle) bleacher.
250g( 1 )
· Please do not use regular detergent, for it will not be
able to clean the basket.
Pour in detergent, close the lid. (The sound of buzzer indicates washing
completion) ( )
Tub Clean process is completed
Final spinning operates for about 20 minutes, can dry the basket and prevent the black mildew from being generated. 20
Maintenance and Repair
Pay attention to the rust on the washing tub
The stainless basket is rustproof, but it may rust in the following cases.
1 The rust-inclined ironwork such as the barrette or the needle remains in the
basket and touches the stainless steel inner wall.
2 The water containing the impurities such as rust or iron power flows into
the washing basket, and the impurities adhere to the stainless steel inner
wall.
38
Maintenance and Repair (continued)
When rusting of the basket occurs, use a sponge socked with liquid cleanser to
remove the rust. (See instruction label on liquid cleanser for details) ( )
· Please do not use metal brush to clean the washing basket lest it will
damage or rust the washing basket.
To avoid rust, the followings must be ensured.
· Avoid water and chlorine bleach in the basket for too long.
Maintenance of the lint filter. (It shall be performed after each time of use)
( )
Lint Filter
Remove the Lint Filter
Put your hand into the groove, press down the buckle on the top with your
finger.
Pull and remove it.
Open the filter
Buckle (On the top) Groove
Lint Filter
Filter Cartridge
Filter Cover
Clear the lint and clean the mesh
When the filter cover comes off
Corner hole of the filter cover
Close the cover and install the lint filter to reset it.
When the filter cover comes off, align the filter cartridge with the corner hole of the filter cover and vertically buckle it.
Kacha
Tuck the buckle (at the bottom) of the lint filter.
Press the cover until the buckle on the top of the filter clicks.
Buckle (at the bottom) ()
Notes
· The lint filter is consumable items. When damage is found in the fiter net,
please buy a new one at a dealer.
Attention
· When the lint filter is fetched out, please do not let the coin or barrette
fall in the bottom of the washing basket.
· Please do not wash clothes after removing the lint filter lest it will damage the clothes.
· If lint filter is wrongly installed, the clothes or filter may be damaged during washing.
39
Maintenance and Repair (continued)
How to keep the product from freezing
1 Turn off the tap.
2 Press the Power On/Off button to turn on the power. [ / ] 3 Select the “Tub
Clean” program and press Start. [ ] [ ] 4 Remove the water supply hose and
turn it downward. (Place a shallow container or a piece of cloth under the
hose as water remained in the hose may be drained.) 14 14
5 After approx. 30 seconds, press Pause to stop the operation. (Water remained
in water supply hose drains out.) 30 [ ] 6 Place the drain hose to the drain
outlet.
7 Press “Spin” button and start to run spin process, then press Pause after
approx. 30 seconds. (Water remained in the washing machine is drained through
the drain hose.) 37 [ ] 30 [ ] 37
8 Press the Power On/Off button to turn off the power. [ / ]
Turn off
1
Water supply hose
How to handle freezing
1 Disassemble the water supply hose, and put it into the warm water as hot as
40oC. 40oC
2 Pour the warm water as hot as 40oC into the basket. 40oC
3 Connect the water supply hose to the tap, and check the washing machine to
make sure the water supply and drain are in normal case.
Warning
Tap shall be closed first before remounting the charging hose. Select
“Blanket” program, slowly open the tap after pressing the start button. (it
shall be treated the same in case of long-term idleness.)
· If there is residue air in the water supply hose and water drainage hose,
the washing machine could be damaged
by compressed air, leading to leakage or injury accident.
40
How to maintain the water inlet
The contamination accumulated at the water inlet will worsen the supply
effect.
1 Turn off the tap, and remove the water supply hose. (Refer to page 13 for
proper disassembly) 13
2 Clean up the contamination accumulated at the filtering net of water inlet.
Water inlet
· If it’s hard to clean up the contamination, disassemble the
filtering net for east cleanout.
Attention
· The filtering net of water supply opening shall be recovered to the original
shape after cleanout, so
as to avoid the failure of water supply valve.
Maintenance to the main unit
Please use the soft cloth to wipe and clean the dirt on the washing machine
body and the control panel.
Warning
During the course of maintenance and repair, don’t spray water directly to any
part of the washing machine body.
· To avoid short circuit or electric shock.
Attention · Please don’t use gasoline, thinner, detergent, alkali or weak-
alkali detergent and wax to wipe the washing ma-
chine body, and please don’t use brusher to wipe the body either.
· When using the chemical duster cloth, please refer to its user manual.
· Remove any detergent touching the lid or other plastic components, otherwise
it will damage the washing ma-
chine body after long remaining.
41
Troubleshooting
About the abnormality alarm
In the following cases, the flash of indicator and the sound of buzzer will announce the abnormality. If the washing machine generates unexpected error alarm, the washing machine shall be temporarily suspended for a while, and then restarted. If the same error alarm occurs again, please follow the following steps.
Flash of indicator
Alarm content
Part to check
Solution
Fail to supply water
( ) Fail to reach the full water level within 40 minutes or
fail to reach the required
level (10L) within 8 minutes 40 8 (10L)
· Is the tap turned on?
?
· Is the tap water pipe frozen or out
of supply? ?
· Is the filtering net at the water
supply opening blocked by
contamination? ?
Fail to drain water
( ) Fail to drain up water within 5 minutes 5
Check the water drainage hose
· Is the hanging height of the water
drainage hose more than 1m? 1m?
· Is the U-shaped hose on the tail
immersed in the water and blocked? U ?
· Is the water drainage hose or water drainage
pump blocked by silt or lint? (Drainage
opening need to be checked also) ?
·
Is the water drainage ?
hose
frozen?
· Is the water drainage hose properly
installed? 10~11 ? 10~11
· NW-65FSP whether or not hang the drain hose?
NW-65FSP ? NW-65FS
· Is the water drainage hose laid down?
?
·
Is the water drainage ?
hose
squeezed
up?
Troubleshooting
Restart operation
Stop during the
spinning course
· Is the laundry laid aside?
?
Please press the “Start/Pause” button to pause the operation, rearrange the laundry evenly, and restart with the lid closed.
Lock of lid cannot be
unlocked
· Press “Pause” button, and then
restart it
If there is still trouble, stop using the unit and request repair.
42
Flash of indicator
Alarm content
The lid is not locked completely
(The lid is not completely closed)
Part to check
· Is there foreign substance under
the lid? ?
Solution
Troubleshooting
Restart operation
Washing basket cannot rotate
(washing, rinsing, spinning)
· Are the washings oblique?
?
· Or is the washing machine placed
straight? See page 8
?
8
Please press the “Start/Pause”
button to pause the operation, rearrange the laundry evenly, and restart with
the lid closed.
· If the above abnormal alarms occur, they may be caused by outside
interference. At that time, please press the Pause button to suspend the
washing machine, then restart it. If the same alarms
occur, please stop the use and request repair.
Before the repair request
Case
Please recheck the following items
Cause
Fail to running
· Is power cut?
?
· Does fuse or breaker blow?
?
· Can the power plug enter the socket properly?
?
· Is the power switch on?
?
· Is the tap turned on?
?
· Is the “Preset washing program” set? 30
“”? 30
· Whether the “Start” button is pressed or not?
?
Water leakage
· Is the tap of proper shape? 14
? 14
· Are the one touch joint and the connection nut unfastened? 13
? 13
43
Troubleshooting (continued)
Case
Cause
Fail to supply water No spinning, washing basket can’t rotate No stirring
Unable to air jet
Please refer to “Part to check” in “About abnormality alarm”. 42 “” 42
· Please refer to “Recommended Operation Time”. 35
“” 35
It doesn’t work after setting of air jet
Cannot open the lid
Abnormal sound occurs
No buzz at the end of washing
· If there is water remained in the spinning basket, Start button
cannot be pressed. And it can only be pressed after draining all
of the water.
· Is the power switched on?
(If there is outage and shutdown during the operation, the
washing machine will generate alarms and cut off the power
supply. The lid is still locked. When power supply is switched on
again, the lid lock will be unlocked.) ?
· Is the washing machine declining or shaky?
Guide
8 Installation
?
8
· Is any barrette or metal item mixed in the washing basket?
?
· Is the buzz at the end of washing set as canceled? 20
? 20
The lid can’t be opened during the operation.
Water cannot be reserved (when pouring the water with water basket)
· The washing machine has been set in safety protection mode during the
operation.
If opening the lid, please press the “Start/Pause”button. 20
” / ”
20
· Is the power switched on?
? (In case of power cut during draining, the drainage valve will keep open.
And the drainage valve will close after the power resumes.)
· Except the failures mentioned above, the lid lock protector may cause cases
such as stop during operation or lid unable to be opened. In such case, please
unplug the power supply unit. Plug it back after 5 minutes, and then reset
operation.
NW-65FSP
· If all indicators turn off during operation but only the water drainage pump
remains in operation, this is the auto operation of protection circuit in
washing machine for water level is too high.This is not an error. After water
drainage pump stops, please reconnect the power supply and reassign the
setting.
44
Automatic power Off
The power will be cut automatically at the end of operation.
The power will be automatically cut if the washing machine keeps one of the following status for above 1 hour. 1
-
Pause
-
Lid open
-
Abnormality alarm describes in page 42 42
With no pressing on “Start/Pause” button in 5 minutes after the power on, the power will be cut automatically. 5
The following cases are not the failures
Case
Cause
Supply water during the course of washing.
The water cannot be charged when starting washing from rinse.
About the water charging
After connecting the water supply pipe, water will come in from the water supply opening if turning on the tap.
The pulsator stop rotating during the charging for about 1 minute. 1
The rotary water supply takes a
longer time.
“Rustle” happens as rotating the washing basket by hand. “”
About the
sound
It sounds “Karcha” at the beginning of washing or spinning. “”
It buzzes during the operation. ” ”””
It buzzes or sounds “Hoola,
hoola” during the high-speed
washing or dehydration. ” ” “”
· Supply water automatically if the water level drops during the
course of washing.
· The rinse water can only be charged after drainage and
spinning.
· With the application of decompression valve, the close of valve
needs certain duration.
· It may be influenced by outside interference, and it takes some
time for the sensor to detect the interference.
· As the water level of washing machine is too low.
· The sound comes from the water flow in the liquid balance
used to relieve the spinning vibration.
· That is generated during the mode switch of the clutch (the
strength of the sound varies with the sound duration).
· That is the electromagnetic sound of the motor switched on and off.
· That is the electromagnetic sound of the motor switched on
and off to control the rotating speed.
45
Troubleshooting (continued)
Case
About
the rinse
Sprinking rinsing turns into water storing rinse.
When the washings is not much, water can’t be poured over the clothes in
sprinking rinising mode.
About the
spinning
Supply water during the course of spinning.
Supply water and start rinsing during the course of spinning.
Spin intermittently after start spinning.
The lid can’t be opened even
when the Pause button is
pressed during the spinning.
The power supply switch won’t work
right away even when the On/Off
button is pressed during the spinning.
NW-65FSP
About the water drainage pump
During the period of water drainage, the water drainage pump start to work,
and there is water drained out from the water drainage hose.
It sounds like asthma when the water drainage pump start to work.
About the water level
Relatively low water level compared with the washings load.
Relatively high water level compared with the washings load.
About the lint filter
There are much floss.
About the washing duration
Washing doesn’t finish beyond the predefined time.
Cause
· It is because the clothes oblique cause the action of the
security switch.
· It doesn’t matter that the water is hard to be poured over the
clothes since there are not much washings.
· The security switch acts as the laundry declines.
Change automatically to the “Water-storage rinse” for the next rinsing.
· The security switch acts as the laundry declines.
Start spinning and agitating after rinsing, and the spinning will go on after
clearing the laundry declination.
· It is because the sensor control the spinning times to improve
the efficiency of spinning.
· When the power supply is cut off, the basket stops completely,
and the lid lock will be unlocked.
· The power supply switch won’t work until the basket stops the
inertial rotation.
· This is to prevent overflow.
The water drainage pump starts automatically when the preset alarming level is
exceeded.
· This is because the water in the washer is going to to be drained off,
resulting in the entry of air into the chamber of the water drainage pump.
· The setting of the water level is based on the extent of the washings
in the washing machine emerging out the water surface and the ability of the
clothes roll up and down in the washing machine.
· Since the clothes of chemical fiber is comparatively light, the
water level is set accordingly low.
· The water level will rise during washing if the clothes being washed
have been drenched or water has been charged in advance.
· If there is much floss in “Normal” program, the efficiency of the floss
filtering can be improved by increasing the water consumption, extending
washing time and setting rinse for more times.
· The washing time may exceed predefined time in case of extremely
small amount of charged water.
46
Case
About the drying time
About the air jet processing
Spinning doesn’t finish beyond the predefined time.
It is not dried.
The power supply switch won’t
work right away when transferred
from switched-off to switched on. “”””
About the power switch
The indicating LED won’t light right away when the power supply switch is
switched on. “”
Four processes LED light after the power supply switch is switched off. “”4
It buzzes after the power supply
switch is switched off. “”””
About the
lid lock
The lid can’t be opened even when
the Pause button is pressed during
the spinning.
About the
flavor
Odor of insulating varnish smells in the beginning of use.
It smells at the time of spinning.
Others
Water comes out from the water drainage hose during first time usage.
Pulsator rotates but does not display the washings load and water quantity
after pressing the Start button.
No reaction after starting.
There are detergent residue remained on the detergent dispenser.
Cause
· The predefined time is the time for drying spinning, and the
actual operation time need to plus the clothes dressing and oblique correction
time, which, in aggregation, will be longer than the predefined time by 5~30
minutes. 5 30
· Depending on the quantities & types of laundries, air temperature &
moisture, seasons and environment, the completion time may differ. ··
· Please refer to “Proposed Operation Time”. 35
“” 35
· The power supply switch doesn’t work from the cutoff of the switch
to the extinguishment of the mode LED. If the power supply is to be switched
on again, please press the switch after the LED extinguish.
· The washing machine sound “Hoola, hoola” after the power supply is
switched on. About 1 second later, the LED light. (since the software switch
is used, the microcomputer need time for internal treatment.) “” 1
· When switching off the power supply with clutch motor in spinning status,
the clutch motor returns to washing status and the mode LED light.
· The operation stops after the power supply is switched off during the
spinning, and it buzzes. That’s the sound generated during switching modes by
clutch. “”
· After the power supply is cut off, the spinning basket stops
completely, and the lid lock will be unlocked.
· This is the odor of the insulating varnish of the motor in the
beginning of use. The odor exists only at the early stage, and will dissappear
about period of time after put into application.
· Adverse drainage condition or excessive foams (due to
excessive detergent) may cause too much spinning load and make the smell even
more intensive.
· Water from tests conducted by the manufacturer remains in the
drainage hose.
· This is because the sensor cannot successfully detect due to
the foreign interference. At that time, the power supply can be cut off and
the washing machine need to be restarted.
· This is because the washing machine is waiting for detergent or
is switching the clutch.
· When the body is excessive oblique, the detergent may remain
on the dispenser. Please check the obliquity of the body.
47
Optional Parts
Extended water supply hose (3m) 3m
· For supply hose extension.
Washing cap (Specialized)
Lint filter
Fixing holder [(NW-65FSP)
Water drainage hose (NW-65FSP)
Extended water drainage hose (about 80cm) 80cm(NW-65FS)
· For drainage hose extension.
Product Specifications
Model
Type
Power
Normal washing capacity
Normal spinning capacity
Normal water level
Rating power
Washing mode
Pressure of tap water
Profile dimension
Weight
NW-65FSP
Fully automatic washing machine
220V~50HZ
6.5kg (the quality of dry cloth) ()
50L(“Normal”program) 50L() Washing:440W; Spinning:350W :440W; :350W Automatic
reverse pulsator type 0.03MPa~0.8MPa (0.3kgf/cm2~8kgf/cm2) W 500mmD 560mmH
965mm 500mm 560mm 965mm About 31kg 31kg
NW-65FS
Fully automatic washing machine
220V~50HZ
6.5kg (the quality of dry cloth) ()
50L(“Normal”program) 50L() Washing:440W; Spinning:350W :440W; :350W Automatic
reverse pulsator type 0.03MPa~0.8MPa (0.3kgf/cm2~8kgf/cm2) W 539mmD 508mmH
965mm 539mm 508mm 965mm About 31kg 31kg
3-W1516-2A L3(C)
48
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>