Inosmart BT Ino Smart Fingerprint Reader Instructions
- June 1, 2024
- InoSmart
Table of Contents
Inosmart BT Ino Smart Fingerprint Reader
Registration of the BT dongle with control unit
- The BT key can be registered to ONLY 1 door.
- With the help of the ‘1’ buƩon on the control unit, we start adding a new BT dongle
- If we have a fingerprint reader installed in the door, it is necessary to confirm the addiƟon with the administrator’s finger. WHITE LEDs light up on the reader. If the reader is not installed in the door, the white light on the control unit lights up and we can continue the process.
- Then briefly (1-2s) press the key buƩon, where the BLUE LED will light up. The signaling will be lit for approx. 2-3 seconds. During this time, BT pairing of the devices will take place and communication will be established between the key and the reader.
- If we have several doors nearby with a built-in BT control unit, it is important to have the BT control unit turned on ONLY on one door that we will pair with the key. In this way, we prevent the automatic pairing of the key to the wrong door.
DeleƟng BT pairings
- on the control unit – press button 2 and then the button on the BT key
- on the BT key – hold the key button for at least 10 seconds.When we release the button, it will be signaled with 5 flashes, which are a sign that the information on the device’s BT pairing has been deleted from the key.
- The procedure described is used when we want to register an already paired key on the ECU.
- It is used when changing the control unit or when teaching in other doors.
Elements
- cord opening
- unlock buƩon
- opening for baƩery replacement
- LED light
- the front side
Battery replacement
Battery Safety Notes
Danger to life. Keep batteries out of the reach of pets and children. If swallowed, seek medical advice immediately. Fire Hazard! Do not short-circuit batteries. Batteries may overheat or explode. Do not expose batteries to water or fire. Do not attempt to charge not-rechargeable batteries. The batteries may explode.
Disposal: The packaging is made of eco-friendly, recyclable material. Please ask your local authorities about appropriate methods of disposal. Defective or empty batteries must be recycled by Directive 2006/66/EC. Return batteries and/or the device to the designated collection facility. Batteries contain toxic substances that must be treated separately from domestic waste.
Warranty Provisions
The device has been manufactured and thoroughly tested to meet strict quality standards. The warranty covers defects in the material and manufacturing process. It does not cover product components that are subject to normal ware and tear (ware parts), or damage to fragile components such as switches, batteries or the casing. Consumer-inflicted damage and improper use of incorrect maintenance of the product will void the warranty.
Warranty Peroid
The warranty period is 12 months from the date of purchase.
Specifications
- Model: Enoto
- Function: Keyless entry system control unit
- Power Source: Battery-operated
Product Usage Instructions
Key Battery Replacement Procedure
- Press and hold the BT key for at least 10 seconds.
- Release the button after holding it for 10 seconds.
- Observe 5 flashes indicating that the device’s BT pairing information has been deleted.
- This procedure is used to register an already paired key on the ECU.
- It is essential when changing the control unit or teaching in other doors.
Frequently Asked Questions (FAQ)
Q: When should I perform the key battery replacement procedure?
A: The key battery replacement procedure should be performed when changing
the control unit or teaching in other doors.