Hisense WF5S1045BW Washing Machine Instruction Manual
- June 1, 2024
- Hisense
Table of Contents
WF5S1045BW Washing Machine
“`html
Specifications:
- Model: WF5S1045BW / WF5S1245BW
- Power Supply: 220-240V~, 50Hz, 1750W
- Dimensions (mm): 595 x 595 x 845
- Capacity: XXXXXXXXX XX kg
- Rated Voltage: XXX-XXXV~
- Frequency: XXHz
- Power Consumption: XXXXW
- IP Rating: IPX4
Product Usage Instructions:
Noise Reduction Board Installation:
-
Align and paste the acoustic absorption wool along the
right-angle impression on the bottom plate. -
Remove surface paper on double-sided tape at four sides of the
bottom plate. -
Press the double-sided tape on four sides manually to secure
the noise reduction board to the machine body firmly.
Auto Dosing Function:
You can cancel the auto dosing function in the Settings menu and
add detergent and softener manually during washing. When cancelled,
place the detergent into the powder detergent compartment.
Washing Programs:
-
Cotton Laundry: Suitable for normally soiled
cotton laundry at 1400 rpm. -
Prewash: For heavily and moderately soiled
cotton or linen. Use for very heavily soiled items. -
Wool: Suitable for machine-washable wool.
-
Quick Wash: Short-time powerful washing
procedure for a small amount of clothes with high dirt. -
Allergy Care: Suitable for high-temperature
resistant fabrics to remove allergens through steam.
Frequently Asked Questions:
How can I switch off the acoustic signals?
To switch off the acoustic signals, press the POWER button.
How do I control the rinse count for the current cycle?
To change the rinse count for the current cycle, long press the
RINSE button.
What should I do if the supply cord is damaged?
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent, or similarly qualified persons to
avoid hazards.
“`
USER’S OPERATION MANUAL
Before operating this unit, please read this manual thoroughly, and retain for
future reference.
WF5S1045BW WF5S1245B*
WF5S1245BW
WF5S1045B*
EN English
12 13 14 15 15 17 17 18 20
21 22 22 23 29 33 40 41 42
43 45 45 46 47 48 49 49 50 51 52 54 56 56 58 Wi-Fi connection
Drum clean Drum clean
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Dimensions(mm)
F E
D
A
C
B
10.5
12.0
69
73
220-240V~
1750W
50Hz
Index
A B C D E F
Dimension(mm)
10.5
12.0
595
595
845
845
560
610
590
640
620
670
1100
1150
Washing Machine
XXXXXXXXX XX kg
XXX-XXXV~ XXHz XXXXW IPX4
The appliance is supplied with a support set that includes: Instructions for
use; 4 plastic plugs; Supply hose; Drain hose holder; Wrench; Noise reduction
board.
Make sure all parts listed above are supplied.
HOW O IN
HE NOI E RED C ION O RD
Right-angle impression
Double sided tape
Pump
1. Before installing the noise reduction board align and paste the acoustic
absorption wool with and along the right-angle impression on bottom plate
(this procedure is unnecessary for some of the models without acoustic abs
orption wool).
3. Incline the machine to an angle of 40° and let the side with right-angle
notch face towards front of the washing machine, as shown in the figure.
Insert the side with oblique-angle notch between two foot screws at back of
the washing machine completely in place. Then, install the bottom plate and
ensure that it contacts with bottom of the washing machine closely.
2. Remove surface paper on double sided tape at four sides of the bottom
plate.
4. Press the double sided tape on four sides manually to secure the noise
reduction board to the machine body firmly.
12
four 13
14
15
16
17
18
19
20
21
22
You can cancel the auto dosing function in the Settings menu and add detergent
and softener manually during washing.
Powder detergent compartment
When the auto dosing function is cancelled, place the detergent into this box.
23
1.0L
0.5L
24
25
1.0L
0.5L
press the button “POWER” 26
27
Washing machine network control key. See the wifi guide on the last page for how to configure the network.
IC ER(Short Press to Enter) Change washing time or rinse times.
EX R RIN E(Long Press to Enter) Press to change the rinse count for current
cycle.
Press to change the water temperature for the selected cycle.
O ENER
DE ERGEN
Switching off the acoustic signals. 28
29
rpm
Ec 4 –
Cn , 0°C)
n he ics
10.5 kg 12 kg 1400 Normally soiled cotton laundry.
10.5 kg 12 kg
1400
Heavily and moderately soiled cotton, or linen.For very heavily soiled items select the “Prewash” function.
kg
kg
1200
For fabrics that are made of polyester(diolen, trevira), polyamide (perlon, nylon), or the like.
W P er 4
ick
erg care (40°C, 0°C)
ab care (40°C, 0°C, 0°C)
hir s
2 kg 2 kg
00 The program is suitable for machinewashable wool.
4 kg 4 kg 1 kg 1 kg
kg
kg
2 kg 2 kg 2 kg 2 kg
It is a short-time powerful washing procedure, 00 which is used to wash a
small amount of clothes
with a high degree of dirt.
The program is suitable for cotton and mixed fabrics. 00 It is suitable for
new or little work clothes. Washing
time will prolong in case of changing default settings.
1400 1400 1400
The program will automatically adjust the main washing duration and rinsing
times according to the amount of clothes in the washing machine. It is
applicable for lightly soilled clothes.
It is suitable for high temperature resistant and less fading fabrics, which
removes allergens such as pollens, mites and parasites through high
temperature steam.
It is suitable for baby clothes and underwear, etc., which sterilizes and
disinfects through high temperature steam
3 kg 3 kg
00 Non-iron shirts or blouses made of cotton, linen, synthetic fibres or blended fabrics.
r s ear
4 kg 4 kg
The program is suitable for sportswear and 1000 leisure wear made from microfibre fabrics.
30
rpm
in Dr C ean
10.5 kg 12 kg
ddi i na C c es
1400
In this program, you can select the duration and spinning rate manually.
The program is used for cleaning the drum and
removing any residues of detergent and bacteria
00
that can accumulate and develop especially when you use programmes with low washing
temperatures.
The drum has to be empty.Run this programme
at least once a month.
Rinse in Dn
eans
10.5 kg 12 kg 1400 This program is defaulted to two rinse and spin.
3 kg 3 kg
Machine-washable items stuffed with synthetic 00 fibres, such as pillows,
quilts and bedspreads;
also suitable for items stuffed with down.
4 kg 4 kg 1400 The program is suitable for jeans.
i k De ica e edding
2 kg 2 kg 3 kg 3 kg
Soft delicate fabrics and machine washable 00 silk. (Refer to the washing
label attached to
the clothing).
1400
Program adapted to wash large items-e.g. Curtains, sheets, duvet covers.
Mi
5 kg
kg
1400
Mixed loads of moderately soiled cotton and synthetic fabrics.
NOTE: 1)Water Temperature: Select the appropriate water temperature for chosen
wash programme. Always follow garment manufacturer’s care label or
instructions when washing to avoid damage to clothes. 2)Actual water
temperature may differ from the declared cycle temperature. 3)The washing
effect depend on water pressure, water hardness, water inlet temperature, room
temperature, type and amount of load, degree of soiling utilized detergent,
fluctuations in the main electricty supply and chosen additional options.
4)Netural (non sudsing) detergent is recommended. 5)Dry powder detergent
should be mixed with warm water (in all cases not just energy program). Note
for Additional Cycles: Users need to rotate knob to the corresponding
position, and requires APP connection on the smartphone to use additional
cycles. If not connected to the network, the default program is Rinse
Spin . User can use mobile phone APP to select Mix, Bedding, Silk Delicate,
eans, Down, Rinse Spin programs.
31
32
The additional settings and functions can only be set in the standby mode of
the applicable program, that is, before the program starts running, and cannot
be selected after the program runs.
C nnec
It is divided into two modes: “press and hold” and “press briefly”. Press
briefly: start the remote control permission of the washing machine; Press and
hold: Connect the WiFi of the washing machine, the control panel symbol ” ”
flashes, and then conduct the networking operation. See the networking
description for the specific networking method.
ea Pre Wash
It is divided into two modes: “press and hold” and “press briefly”. Press
briefly: Add “Steam” function, press twice to cancel the function, and cycle
in sequence. Press and hold: Increase the “Pre Wash” function, press twice to
cancel the function, and cycle in sequence. 1. Select this function to add a
Pre Wash program before the Main Wash stage. 2. After the program is started,
the indicator remains on until the end of Pre Wash program. After the end of
Pre Wash, the indicator will off.
e
Changing the temperature for the selected program. Each program has a preset
temperature that can be changed by pressing the position (4) Temp. (WASHING
TEMPERATURE). (– indicates cold wash) The temperature is displayed on the
display unit above the button.
33
in
Use this to adjust the spinning rate. With preset or selected spinning rate,
the selected spinning rate will be lit on the display unit. If you select
draining without spinning, the 0 will appear on the display unit.
icker E ra Rina
Quicker: After pressing this function key, the program time will be shortened
by setting, and press it again, the program time will be increased back to the
original setting. After the program is started, the indicator is always on.
1)When this function is selected, the main wash time or the number of rinsing
times will be reduced. 2) Weighing will be canceled after triggering this
function, weighing will be resumed if the function is canceled. E ra Rinse
Long press this key for 3 seconds to increase the number of rinses, and long
press this key again to restore the initial setting of rinses.
34
DELAY END
1.Press this key to set the Delay End time. This key is only valid in standby
mode.
2.After the Delay End function is selected, each time the Delay End key is
pressed, the time increases by 1h. If the programme time before the Delay End
does not meet the integer multiple of 1h, then the first Delay End will make
up the integer multiple of 1h. And after that, each time the Delay End key is
pressed, the time increases by 1h. After the Delay End time is set up to 24h,
the Delay End key can be pressed again to cancel this setting. If you turn the
knob to select another programme or press other keys (including invalid keys,
the principle is that any key that affects the washing process will cancel the
Delay End program; however, Child Lock, Quiet, and remote control permission
will not cancel the Delay End program) after the Delay End function is set and
before the programme starts running, the current Delay End programme will be
cancelled. 3.The Delay End time is the end time, that is, it includes the
washing time, so the Delay End time must be greater than the washing time. For
example, if the total time of the currently selected programme is 2:28, the
selection range of Delay End time is 3-24 hours. That means, the display
changes from 2:28 to 3:00, 4:00, …, 9:00, h:10, …, h:21 to h:24 in order.
After the Delay End programme starts, the time display will change from h:24,
h:23, …, h:10, 9:59, 9:58, …, until after the washing programme starts to run,
at which time the display shows 2:28. This judgment condition also applies to
the automatic weighing time function. When the display only shows the hour,
the display shows the remaining time of the Delay End programme with the
rounding method. (e.g. For 21:59, it still shows 21 hours.)
4.When the Delay End function is being selected (set), the Clock icon” ” is
always on; When the Delay End programme is running, the Clock icon” ” flashes.
- Control the washing machine from the standby state to the program running
state, or from the program running state to the program pausing state. 2)
Press the key in the standby mode to switch to door locking mode. If the door
is unlocked, the washing machine cannot start the program. At the same time,
the door locking error alarm will occur. 3) After setting the Preset function,
press this key in the standby state. If the door is normally locked, the
washing machine will switch to the Preset running state. If it is not locked,
the washing machine will switch to the abnormal state and the door locking
error alarm will occur. 4) If the program is switched from the running state
to the pausing state, the program will remain in the stopped position and wait
for the user to press this key again to switch to the running state of the
program. When the program switched from the Spin state to the program pausing
state and then enters the program running state again, the program will start
from the initial position of the Spin program. 5) Control the washing machine
to switch from abnormal state to program running state. This abnormal state
applies only to alarm exceptions that can be canceled. 6) When the washing
machine is paused, the door will be unlocked automatically if the following
conditions are met: 1.The water level is lower than the water level for
opening the door; 2. The sensor temperature in the drum is lower than 50ºC; 3.
The motor speed is 0. If the unlocking conditions above are not met, there
will be no action. 7) After starting the washing machine, the set parameters
can not be adjusted.
35
P er
- Control the washing machine to switch between “shutdown state” and “stand
state”. In the shutdown state, all display and output are turned off. The
shutdown response time is 2s when the power key is pressed continuously. 2)
Press the power key in the shutdown state, and the buzzer will sound to ent
the standby state. The display’s indications light up in tun as soon as the
power is turmed on. 3) Press the power key to start the machine and judge the
door lock stat 4) After the washing machine is in standby state or the END is
displayed, the do will be unlocked, and press the power key to shut down. If
there is no shutdown operation within 2 minutes, the washing machine will
automatically power off. 5) In the pausing state, the display time and colon
on the LED flash at the same
time.
ener
The automatic softener dosage is enabled by default, and you can control the dosage by the button as needed; if you need to add softener by yourself, you can disable the automatic softener dosage.
De ergen
36
Chi d ck
Power off in 3 seconds by touching the power button
37
Me
Quicker
Quicker
38
POWDER DETERGENT DETERGENT STEAM QUICKER DELAY END
‘EQ %QVVQP 5[PVJGVKEU 9QQN 2ower 49′ 3uick 15′ #uto #llergy b`qd $aby care
Rghqsr 5portswear 5pKP &TWO%NGCP
inse in n
eans i e ica e e ing Mi
39
40
8 41
42
8 8
8 8
43
EMERGENCY DOOR OPENING
44
.
Clean the detergent compartment regularly.
1. Open the detergent compartment, press the limit lever as shown in the
figure, and pull out the detergent compartment;
2. Open the two limit ribs in the position shown in the figure, pull up and
remove the lid;
3. Empty the remaining detergent and softener in the dispenser box, clean the
dispenser and lid with running water, and wipe dry with a cloth;
4. Insert the limit ribs of the lid into the corresponding slots as shown,
and press down the lid until you hear a “click” sound, indicating the flange
ribs at the end of the lid snaps into place. Put the detergent compartment
back in place.
45
46
Press the door cover and automatically pop open
The pump filter must be timely cleaned, especially after washing very fleecy,
woolly, or very old laundry.
47
48
49
Problem/ error
F01
F03
F04/F05/F06/ F07/F23
Indication on the display unit and problem description Water inflow fault
Drainage fault
Electronic module fault
What to do?
Check the following: · Is the water supply tap open and is the
pressure too low? · Is the water supply hose pinched? · Is the filter on the
water supply hose clogged · Is the hose frozen?
Check the following: · Is the hose pinched, does the water flo
through it? · Is the filter on the drain hose clogged · Is the hose frozen?
Switch off the appliance;
.
Press the
button again. If the
error reoccurs, call a service technician.
F24
Water level reaches
Stop the programme by pressing the
overflow level
button. Restart the programme.
If the appliance continues to pump water into
the tub, close the water tap and call a service
technician
F13
Error while locking the Door is closed, but it cannot be locked.
door
Switch off the washing machine. Switch it back
on and restart the washing programme.
If the error reoccurs, call a service technician.
F14
Error while locking the Door is closed, but it cannot be unlocked.
door
Turn off the appliance, then turn it back on. If
the error reoccurs, call a service technician.
Unb
Unb Unbalance alarm
Unbalance alarm shall be solved by the following
methods
1.Laundry winding
shutdown , open the door, shake the clothes and put them back into the washing machine, then select the single dewatering program to dry again.
2.Too light-weighted laundry
50
Washing Machine
XXXXXXXXX XX kg
XXX-XXXV~ XXHz XXXXW IPX4
51
Drum Clean. 52
Powder detergent compartment
When the auto dosing function is cancelled, place the detergent into this box.
53
54
55
56
WF5S1045BW WF5S1045B*
Program
Selected Rated Maximum Program Energy Water Remain- Maximum
Tem- Capacity tempera- duration con-
con-
ing speedrea
perature (kg)
ture in (h:min) sump-tion sumption moisture ched
()
drum
kWh/cy- litres/cy- content rpm
()
cle
cle
(%)
Eco 40-60 full load
Eco 40-60 half load
Eco 40-60 1/4 load
10.5
41
3:59
1.166 58.0
53.00
1400
5.25
28
2:48
0.439 42.0
52.00
1400
2.5
24
2:20
0.179 30.0
52.00 1400
Cotton
20
10.5
20
2:09
0.200 85.0
51.00
1400
Cotton
60
10.5
55
3:29
1.600 110.0 53.00 1400
Synthetics
40
5.25
40
1:58
0.880 69.0
45.00
1200
Quick 15′
20
1.0
19
0:15
0.050 22.0
55.00
800
WF5S1245BW WF5S1245B*
Program
Selected Rated Maximum Program Energy Water Remain- Maximum
Tem- Capacity tempera- duration con-
con-
ing speedrea
perature (kg)
ture in (h:min) sump-tion sumption moisture ched
()
drum
kWh/cy- litres/cy- content rpm
()
cle
cle
(%)
Eco 40-60 full load
Eco 40-60 half load
Eco 40-60 1/4 load
12.0
38
3:59
1.270 80.0
52.00
1400
6.0
30
3:00
0.580 56.0
52.00
1400
3.0
25
2:40
0.230 40.0
53.00
1400
Cotton
20
12.0
20
2:09
0.150 96.0
53.00
1400
Cotton
60
12.0
58
3:29
2.055 130.8 53.00
1400
Synthetics
40
6.0
40
2:18
0.940 81.5
35.00
1200
Quick 15’
20
1.0
19
0:15
0.050 25.0
65.00
800
57
Wi-Fi connection
Enter the “Settings” interface on your smartphone or tablet PC, enable the
Bluetooth and Wireless Connection, and connect to the wireless network.
NOTE
This device can support the 2.4 GHz Wi-Fi.
Download
In the APP Store (Google Play Store, Apple App Store) on your smartphone or
tablet PC, find the ConnectLife app, download and install it.
NOTE In order to improve performance and experience, the application may be
updated without notification.
Log in
You need to log in to ConnectLife with your account first. If you do not have
a ConnectLife account, you will need to create a new one. Please refer to the
App Instructions for details.
NOTE
If you already have a Google account, you can use your Google account to log
in directly.
Device Binding
1. Open ConnectLife on your smartphone or tablet PC; 2. Bind your device on
ConnectLife as follows:
A.Click “Start here Add appliances” in “Home” page, or click “Add appliances”
in “Devices” page, or click “+”.
B.Select “Washing Machine” or click”Scan QR/BAR code” or “Manual entry” below.
C.Scan the QR/BAR code on the device or enter the AUID/SN manually. If you can
not find it, click for instructions. D.Click “SET UP APPLICATION” E.Read the
instructions, operate the device into the Networking and Binding state, and
click “NEXT”. F.At this time, the app starts to search for devices, and you
can select the device to be connected to
the network from the search list; If it is not found, check your bluetooth
whether turn on. Bluetooth should be keep it on at all time. And then click
“NEXT”. G.Select your home Wi-Fi, enter the password, Then click the
“CONNECT”. The appliance will start networking and binding. H.After binding
successfully, you can set the device name and room. I .Now, the device can be
control remotely by APP.
NOTE
How to reset Wi-Fi and unbind all the binding relationship of the device:
1. Press the power key to start the device and make it connect to the network normally.
2. Press the last two keys simultaneously for 3 seconds, and the screen will display ” “.
3. Shut down and restart the device to make a new binding.
4. After unbinding, the device must be restarted, or the unbinding will fail. Unbunding
will delete users information stored in appliance before.
5. How to exit the network distribution mode:
If you want to quit when screen display ” ” , press”
“simultaneously for 3 seconds
you can turn off the appliance by press ” ” or wait for 5 minutes.
58
2317570-X08061849D