VEVOR US R6 Corner Rounder Cutter Instructions
- May 21, 2024
- VEVOR US
Table of Contents
VEVOR US R6 Corner Rounder Cutter
Product Information
A manual fillet machine is a lightweight and easy-to-operate device that is widely used for fillet-cutting of business cards, books, packages, decorations, documents, certificates, bags, and notebook’s PVC cards, etc. It is applicable to paper, cardboard, film, PVC certificates, leather, etc. It has a cutting height of 30mm and fillet radius of R3, R4, R6, R8, R10 (R6, R10-Random, Others-Please purchase separately); Dimension: 250 X 150 X 168MM (LWH) Net Weight: 4 KG. The product is manufactured by FS CHUANG TUO MECH EQUIP CO.LTP. in GuangDong China.
Product Usage Instructions
- Cut the fillet radius as required using a knife with the same radius as the machine.
- Ensure that the machine is adjusted and tested before use.
- Do not remove the adjustment unless necessary or adjust the distance between the upper and lower blades after replacing the blades.
- Do not place your hand between the upper and lower blades when operating the handle.
- If you face troubles such as an unsmooth fillet cut but connected deckle edge left or cut but irregular, follow the below troubleshooting steps
Troubleshooting
- Cause: Blunt blade
- Elimination Method: Grind or replace the blade
- Cause: Too large gaps between upper and lower blades
- Elimination Method: Adjust it until fitted
- Cause: Wrong Position of Cut Material Displacement
- Elimination Method: Adjust the positioning block until the cut material is tangent to the 90-degree straight edge, then tighten the positioning block. Hold the material to prevent it from displacement.
Instructions Maual Fillet Machine
Applications
Manual fillet machine is widely used for fillet-cutting of business cards,
books, packaging and decoration, documents, certificates, bags, and notebook
PVC cards, etc, which applies to paper, cardboard, film, PVC certificates,
leather, etc. Light weight and strength saving, easy operation, and low cost,
it is popular with no need of maintenance.
Specifications
- Cutting Height: 30MM;
- Fillet Radius: R3, R4, R6, R8, R10 (R6, R10-Random,Others-Please purchasing seperately);
- Dimension: 250 X 150 X 168MM (LWH)
- Net Weight: 4 KG.
How to Use
Cut the fillet radius as required, ensure to use a knife with the same
radius as the upper and lower molding blades, tighten the pressure screw since
the touch of concave and convex part of the upper and lower molding blades,
test with a piece of paper than on products.
Knife Replacement
-
Remove paper pressing device;
-
Press to the limit of the handle, plug lock pin⑦ to lock pin hole⑩， and fasten the tool carrier;
-
Replace the upper blade④ and lower blade⑤ with the needed blade;
-
Fasten the upper blade④ first, touch tightly with the lower blade⑤, then lock the lower blade⑤;
-
Press the handle and remove the lock pin⑦;
-
Finished.
-
handle®tool carrier
-
tool carrier
-
aper press in g device
-
upper b 1 ad e
-
ower blade
-
positioning plate
-
lock pin
Maintenance and Safe
Adjusted and tested before shipping, it SHOULD NOT be removed unless you
【have special requirement or need to adjust the distance between upper and
lower blades after replacing the blades. Dive your hand between upper and
lower blades when operate the handle is FORBIDDEN!
Troubleshooting
| Trouble | Cause | Elimination methods |
|---|---|---|
| Unsmooth fillet | Blunt blade | Grind or replace the blade |
| Cut but connected | Too large gaps between upper and lower blades | Adjust it |
untill fited
Deckle edge left| Wrong Position of Cut Material| Adjust the positioning block
until the cut material is tangent to the 90-degree straight
edge, then tighten the positioning block
Cut but Irregular| Displacement| Hold the material to prevent it
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>