Birddog Lighting SNRL-RGBMCNTRL LED Neon 4 Wire 120V RGB Color Changing Rope Light Mini Controller Instruction Manual
- June 12, 2024
- Birddog Lighting
Table of Contents
LED Neon 4-Wire 120V RGB Color Changing Rope
Light Mini Controller with Wireless Remote
120V RGB LED IR Controller Remote Guide (SNRL-RGBMCNTRL)
SNRL-RGBMCNTRL LED Neon 4 Wire 120V RGB Color Changing Rope Light Mini
Controller
ON/OFF Buttons:
Use to turn the controller on or off. Controller will start on last setting
selected.
UpSun Button:
Use to increase single color brightness; increase effect speed.
DownSun Button:
Use to decrease single color brightness; decrease effect speed.
7 Pre-Set Color Buttons:
Use to quickly select a pre-set color from the top or bottom row: (top row)
Red, Green, Blue, White, or (bottom row) Yellow, Cyan, Pink. The brightness
setting of each color can be adjusted up or down (see UpSun and DownSun button
instructions). The middle 9 buttons are pre-set brightness buttons for the
bottom row colors with the top button being 25% brightness, middle button 50%
brightness, and the bottom button 75% brightness.
Effect Buttons:
FLASH: Jumps between 7 pre-set colors: Red, Green, Blue, Yellow, Cyan,
Purple, and White. Use the UpSun or DownSun buttons to speed up or slow down
effect speed.
STROBE: Seamlessly fades between all colors creating a rainbow color
change effect. Use the UpSun or DownSun to speed up or slow down effect speed.
FADE: Flashing Pink.
Use the UpSun or DownSun buttons to speed up or slow down effect speed.
SMOOTH: Jumps between 3 pre-set colors – Red, Green, and Blue.
Use the UpSun or DownSun buttons to speed up or slow down effect speed.