HUAWEI SLO-B09 Watch Fit 3 Smartwatch User Guide

: June 1, 2024
: Huawei

Table of Contents

HUAWEI SLO-B09 Watch Fit 3 Smartwatch
Quick Start Guide
Set Up Your Device
Operation and safety
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HUAWEI SLO-B09 Watch Fit 3 Smartwatch

Quick Start Guide

Charging

Connect the metal contacts on the charging cradle to those on the back of the device, then put them on a flat surface.
Connect the charging cradle to a power supply, and the device’s screen will light up and display the battery level. $HUAWEI-SLO-B09-Watch-Fit-3-Smartwatch-FIG-1 $1$$

1| Up button Press and hold the button to power on, power off, or restart the device.
---|---
2| Down button
3| Microphone
4| Charging port
5| Heart rate sensor
6| Speaker
7| Quick release button

Set Up Your Device

Press and hold the Up button or charge the device to power it on.
Use your phone to scan the QR code, or search for “Huawei Health” in AppGallery or on consumer.huawei.com to download the Huawei Health app. $HUAWEI-SLO-B09-Watch-Fit-3-Smartwatch-FIG-1 $2$$
Open the Huawei Health app, go to the device’s screen, choose the devices you wish to add, and follow the onscreen instructions to complete pairing.

Getting help

View the online help in the Huawei Health app for more information about connection and functions, as well as usage tips.

THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY AND DOES NOT CONSTITUTE ANY KIND OF WARRANTY.

Trademarks and Permissions

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Huawei Technologies Co., Ltd. is under license. Huawei Device Co., Ltd. is an affiliate of Huawei Technologies Co., Ltd.
Other trademarks, products, services and company names mentioned may be the property of their respective owners.

Privacy Policy

To better understand how we protect your personal information, please see the privacy policy at https://consumer.huawei.com/privacy-policy.

Operation and safety

[Warning]

Please read all of the safety information carefully before using your device to ensure its safe and proper operation and to learn how to dispose of your device properly.
Using an unapproved or incompatible power adapter, charger or battery may cause fire, explosion or other hazards.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
Ideal temperatures: -10°C to +45°C for operating, -20°C to +55°C for storage.
Keep the battery away from fire, excessive heat, extremely low air pressure and direct sunlight. Do not place it on or in heating devices. Do not disassemble, modify, throw, or squeeze it.
Do not insert foreign objects into it, submerge it in liquids, or expose it to external force or pressure, as this may cause it to leak, overheat, catch fire, or even explode.
Do not attempt to replace the battery yourself — you may damage the battery, which could cause overheating, fire, and injury. The built-in battery in your device should be serviced by Huawei or an authorised service provider.
Please consult your doctor and the device manufacturer to determine if the operation of your device may interfere with the operation of your medical device.
This product is not designed to be a medical device and is not intended to diagnose, treat, cure or prevent any disease. All data and measurements should be used for personal reference only.
If you experience skin discomfort when wearing the device, take it off and consult a doctor.
Adult supervision is advised if children are to use or come into contact with this product.
Switch off your wireless device when requested to do so in hospitals, clinics or health care facilities. These requests are designed to prevent possible interference with sensitive medical equipment.
Some wireless devices may affect the performance of hearing aids or pacemakers. Consult your service provider for more information.
Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker.
If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket.
Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving.
To prevent damage to your device’s parts or internal circuits, do not use it in dusty, smoky, damp or dirty environments or near magnetic fields.
Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire.
Dispose of this device, the battery, and accessories according to local regulations. They should not be disposed of in normal household waste. Improper battery use may lead to fire, explosion, or other hazards.
If the battery leaks, ensure that the electrolyte does not make direct contact with your skin or eyes. If the electrolyte touches your skin or splashes into your eyes, immediately flush with clean water and consult a doctor.
Do not place sharp metal objects, such as pins, near the microphone. The microphone may attract these objects and result in injury.
Wireless devices may interfere with the aeroplane’s flight system. Do not use your device where wireless devices are not allowed according to the airplane company’s regulations.
Switch off your wireless device whenever you are instructed to do so by airport or airline staff. Consult the airline staff about the use of wireless devices on board the aircraft, if your device offers a ‘flight mode’ this must be enabled prior to boarding an aircraft.
To ensure the best audio performance of your device’s microphone, use a cloth to wipe the area of the microphone that has been exposed to water.
Do not use the microphone until the wet areas are totally dry.
Protect the wearable and its accessories from strong impact, strong vibration, scratches, and sharp objects, these may damage the device.
Loosen the strap for a little bit during the day to let your skin breathe. If wearing it starts to feel uncomfortable, take off your wearable and let your wrist have a rest. If it still feels uncomfortable, stop wearing it and seek medical advice as soon as possible.
You can also purchase straps made from other materials and with different designs from the official Huawei website.
Ensure that the power adapter meets the requirements of IEC/EN 62368-1 and has been tested and approved according to national or local standards.

WARNING:

This device contains a coin, button, or small-sized cell battery. Do not swallow the battery, as it constitutes a chemical burn hazard.
If the coin, button, or small-size cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Disposal and recycling information

The symbol on the product, battery, literature, or packaging means that the products and batteries should be taken to separate waste collection points designated by local authorities at the end of the lifespan.
This will ensure that EEE waste is recycled and treated in a manner that conserves valuable materials and protects human health and the environment. For more information, please contact your local authorities, retailer, or household waste disposal service or visit the website https://consumer.huawei.com/en/.

Reduction of hazardous substances

This device and its electrical accessories comply with locally applicable rules on the restriction of the use of certain hazardous substances in electrical and electronic equipment, such as EU REACH regulation, RoHS and Batteries (where included) directive.
For declarations of conformity about REACH and RoHS, please visit the website https://consumer.huawei.com/certification.

RF exposure requirements

As recommended by international guidelines, the device is designed to comply with the limits established by the market that the device will be placed on.
For the countries that adopt the SAR limit of 2.0 W/kg(Head) and 4.0 W/kg(Limbs) over 10 grams of tissue.
The device complies with RF specifications when the device is worn on the wrist and at a distance of 1.0 cm from your face.

Highest reported SAR value:

SLO-B09| Head SAR: 0.07 W/kg.

Limbs SAR: 0.09 W/kg.

---|---
SLO-B19| Head SAR: 0.09 W/kg.

Limbs SAR: 0.15 W/kg.

EU regulatory conformance

Hereby, Huawei Device Co., Ltd. declares that this device complies with the following Directive: RED 2014/53/EU, RoHS 2011/65/EU.
The full text of the EU Declaration of conformity and the most recent information about accessories & software are available at the following internet address: https://consumer.huawei.com/certification.

Frequency bands and power

Frequency bands in which the radio equipment operates: Some bands may not be available in all countries or all areas. Please contact the local carrier for more details.
SLO-B09: Bluetooth 2.4GHz:14dBm.
SLO-B19: Bluetooth 2.4GHz:14dBm, NFC 13.56MHz:42 dBμA/m at 10m.
Please go to Settings > About > Regulatory information on the device to view the E-label screen.

ISED Canada compliance RF exposure requirements

Important safety information regarding radio frequency (RF) radiation exposure:
The device complies with RF specifications when the device is worn on the wrist and at a distance of 1.0 cm from your face. Failure to observe this guideline may result in RF exposure exceeding limits.

Certification information (SAR)

This device is also designed to meet the requirements for exposure to radio waves established by Innovation, Science and Economic Development Canada (ISED).
The SAR limit adopted by Canada is 1.6W/kg averaged over 1 gram of tissue for use against the head and 4.0W/kg averaged over 10 grams of tissue for use on the wrist, and the highest SAR value reported to the ISED for this device type complies with this limit.

ISED Statement

This device complies with CAN ICES-3 (B)/NMB-3(B).
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions: 1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.