Amazon B1DUGZWCECL Projection Alarm Clock with FM Radio User Guide

June 14, 2024
Amazon

Amazon B1DUGZWCECL Projection Alarm Clock with FM Radio

Before use

Thanks a lot for choosing our product. Please read the following information carefully:

  1. This product is designed to be used with the original adaptor provided in the package.
  2. The built-in battery inside the product is only for time backup in case of a power outage.
  3. Please follow the instructions to set up the product.
    We hope you have a nice experience using our product.

Precautions

  1. Do not expose the unit to extreme temperatures, direct sunlight, dust or humidity.
  2. A cloth or other protective material should be placed between the clock and the furniture.
  3. Plug off the power before cleaning the clock with a soft cloth moistened only with mild soap and water.
  4. You must use the original adapter.
  5. Do not disassemble the clock or touch any components.

Diagram

  1. FM Radio
  2. Digit Decrease
  3. Digit Increase
  4. Snooze/Display Button
  5. Time Setting
  6. Projection Button
  7. Projection Len
  8. Projection Pillar
  9. USB Charging Port
  10. Type-C Power Supply Port
  11. Radio Volume Adjustment
  12. Display Brightness Adjustment
  13. Alarm Volume Adjustment
  14. Alarm Setting
  15. Antenna
  16. Reset

Time Setting

  1. In time display mode, long press to enter the HOUR setting, short press / to adjust time and long press to quickly adjust. Short press again to enter the MINUTE setting. After the setting is finished, short press to save.
  2. In time display mode, short press to switch between 12 and 24-hour format. The setting automatically saved after 3s.

Alarm Setting

Alarm Time Setting

  • In time display mode, long press, to set alarm 1, short press / to set HOUR, long press to quickly adjust. Short press, again to set MINUTE. Short press, to save settings.

NOTE: The setting steps of alarm 2 is the same as the alarm 1.

Alarm Ringtones Setting

  1. In time display mode, short press / to choose ringtones, and short press it again to the next ringtone. When you set it, the display will simultaneously show the corresponding icon namely, 01, 02, 03, BU, and RD. The last ringtone you choose will be the alarm ringtone.
    NOTE: If you set the FM radio as your alarm ringtone, the last radio channel you listen to will be the alarm ringtone.

  2. Toggle the switch to adjust the alarm volume.

Snooze Mode

  • When the alarm rings, a short press. temporarily stops the alarm for 9 minutes and the alarm will go off again after 9 minutes’ snooze.

Turn off the Alarm

  1. When the alarm rings, short-press any button except. to turn off the alarm, and the alarm will go off on the next day.
  2. Short press or turn off the alarm permanently, and the display will not show the icons .

FM Setting

FM Station Searching

  1. Short press. to turn on/off FM radio, and Long press / to manually search radio channels.
    NOTE: Long press. the FM radio will automatically search and save up to 30 channels when you use it for the first time.

  2. When you listening to the radio, short press / to switch saved radio channels.

  3. Adjust FM volume via the g, button on the back.

FM Sleep Mode

  1. In radio mode, short press. to enter FM sleep mode, and press it again to set sleep time (5, 15, 30, 45, 60, 75, 90 minutes).
  2. After setting, short press. and the display will show the remaining sleep time.

NOTE: The FM radio will automatically turn off after the sleep time is finished.

Projection Setting

Brightness adjustment

  1. In time display mode, short press. to turn on the projection, and short press again to adjust the projection brightness (Low-Medium-High-OFF). Long pressing. can flip the time projection to 180 degrees.
    Note: a. The best projection distance is from 0.5m to 3m, so please maintain the projection distance in this range.

    • The projection cannot be used in a strong light environment, so the projection brightness may be weak during the day.
    • After a power outage, the projection brightness and display direction are the same as the last time.
  2. In projection mode, rotate the projection pillar to adjust the projection angle from -90 degrees to 90 degrees.

Display Brightness Setting

  1. Steplessly adjust display brightness via the. switch on the back.
  2. Long press. to turn on or off the display, the projection brightness will not change.

Note: If you adjust the display to low brightness before sleeping, please adjust the brightness to the highest via. on the next day.

USB Charging Function

  1. The Type-C (10) port on the back is used for the power supply of the clock.
  2. The USB (9) port on the side is used for charging your phone, tablets, etc.

Note: Please use the original adapter while charging.

Specifications

Input 5V 1.5A Usb Output 5V 1.2 A(Max)
Projection Angle -90°-90° Projection Distance 0.5-3m
Projection Brightness 3 levels Alarm Ringtones 4 ringtones + FM radio

Package Contents

FCC Statement

Operation is subject to the following two conditions

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Note
This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/N technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Amazon User Manuals

Related Manuals