BOSCH SMH4HVX00G 60cm Fully Integrated Dishwasher User Guide

June 1, 2024
Bosch

BOSCH-logo

BOSCH SMH4HVX00G 60cm Fully Integrated Dishwasher

BOSCH-SMH4HVX00G-60cm-Fully-Integrated-Dishwasher-
product

Product Information

  • Specifications:
    • Product: Dishwasher
    • Water Hardness Settings: Soft, Medium, Hard
    • Programmes: Various with different durations, energy consumption, and water usage
    • Special Features: Home Connect app integration, water softening system, dispenser for special salt and rinse aid

Product Usage Instructions

  • Setting up Home Connect:
    • Install the Home Connect app on your mobile device.
    • Follow the instructions in the app.
    • Scan the QR code with the Home Connect app.
  • Water Hardness Settings:
    • Refer to the table in the instruction manual to select the appropriate water hardness setting.
  • Adding Special Salt:
    • Unscrew the lid of the special salt dispenser.
    • Fill the dispenser with water on initial start-up.
  • Adding Rinse Aid:
    • Press the catch on the lid of the rinse aid dispenser and lift.
    • Add rinse aid up to the max mark.
    • Close the lid of the dispenser.
  • Setting the Water Softening System:
    • Press the designated button for 3 seconds to open basic settings.
    • Adjust the water hardness setting by pressing the button until the right value is displayed.
    • To save settings, press the button for 3 seconds.
  • Programmes:
    • Choose the appropriate program based on the desired duration, energy consumption, and water usage as per your needs.
  • Adding Detergent:
    • Add detergent to the dry detergent dispenser as per the recommended quantity.
    • Close the lid of the detergent dispenser securely.
  • How to Use Your Appliance:
    • Load suitable tableware into the dishwasher after removing large food remnants.
    • Add detergent to the dispenser.
    • Switch on the appliance.
    • Select the desired program.
    • Start the program and wait for it to complete.
    • Remove tableware at the end of the program.
    • To cancel a program, press the designated button for approximately 4 seconds.
  • Cleaning Filters:
    • After each wash, check and clean filters for residue.
    • Turn the coarse filter anticlockwise and remove it for cleaning.

FAQs

  • Q: How often should I add rinse aid?
    • A: Add rinse aid whenever it falls below the maximum mark indicated on the dispenser.
  • Q: Can I use regular salt instead of special salt?
    • A: No, only use special salt as regular salt can damage the appliance.

Setting up Home Connect

Tip: Connect your appliance to a mobile device. You can conveniently change all settings using the Home Connect app.

  1. Install the Home Connect app on your mobile device and follow the instructions.
  2. Scan the QR code with the Home Connect app.BOSCH-SMH4HVX00G-60cm-Fully-Integrated-Dishwasher-fig-1 \(1\)

Overview

Overview of water hardness settings

  • You can find an overview of the water hardness values that can be selected here.
  • A table of country-specific units can be found in the instruction manual.

Setting the water softening system

  1. Press .
  2. To open the basic settings, press setup 3 sec. for 3 seconds.
    • The display shows set.
    • The display shows.
  3. Press start repeatedly until the right water hardness has been set.
  4. To save the settings, press setup 3 sec for 3 seconds.

Programmes

  • The program data has been measured in the laboratory according to
  • European standard EN 60436.
  • The consumption figures depend on the program and additional function selected.
  • The running time will change if the rinse aid system is switched off or rinse aid needs to be added.

Quick Reference

BOSCH-SMH4HVX00G-60cm-Fully-Integrated-Dishwasher-fig-1
\(5\)

Adding special salt
To avoid damage to the appliance, only add special salt to the dispenser for special salt just before the program starts.

  1. Unscrew the lid of the dispenser for special salt and remove it.
  2. On initial start-up: Fill the dispenser right up with water.
  3. Add the special salt to the dispenser. The water in the dispenser is displaced and forced out. Never add detergent.
  4. Place the lid back on the dispenser and turn to close.

Adding rinse aid

  1. Press the catch on the lid of the dispenser for rinse aid 1 and lift ⁠ 2.
  2. Add rinse aid up to the max mark.
  3. Close the lid of the dispenser for rinse aid.
    • The lid clicks into position.

Adding detergent

  1. Add the detergent to the dry detergent dispenser.
  2. Close the lid of the detergent dispenser.
    • The lid clicks into position.

How To Use

How to use your appliance

  1. Load the tableware. Only clean tableware that is suitable for dishwashers. Remove large remnants of food from the tableware. Check that the spray arms can to rotate freely.
  2. Add detergent.
  3. Switch on the appliance .
  4. Select the program.
  5. Start the program ⁠start.
  6. Remove the tableware at the end of the program.
  7. To cancel the program, press reset 4sec for approx. 4 seconds.
    • The program is canceled and ends after approx. 1 minute.

Cleaning filters

  1. After each wash check the filters for residue.
  2. Turn the coarse filter anticlockwise 1 and remove the filter system ⁠ 2.
  3. Pull down the microfilter to remove it.
  4. Press the locking catches 1 together and lift the coarse filter out ⁠ 2.
  5. Clean the filter elements under running water.
  6. Re-assemble the filter system.
  7. Insert the filter system into the appliance and turn the coarse filter clockwise. Make sure that the arrow markings match up.

Cleaning spray arms

  1. Unscrew the upper spray arm 1 and pull down to remove ⁠ 2.
  2. Pull up the lower spray arm to remove it.
  3. Check the outlet nozzles on the spray arms for blockages under running water and remove any foreign bodies.
  4. Insert the lower spray arm.
    • The spray arm clicks into position.
  5. Insert the upper spray arm and screw it firmly in place.

Clean wastewater pump

  1. Disconnect the appliance from the power supply.
  2. Remove the filter system.
  3. Scoop out any water.
  4. Prise off the pump cover using a spoon and grip it by the crosspiece.
  5. Lift the pump cover inwards at an angle and remove it.
  6. Remove any remnants of food and foreign bodies in the area of the impeller.
  7. Insert the pump cover 1 and press down 2.
    • The pump cover clicks into position.
  8. Install the filter system.

Troubleshooting

BOSCH-SMH4HVX00G-60cm-Fully-Integrated-Dishwasher-fig-1
\(20\) BOSCH-SMH4HVX00G-60cm-Fully-
Integrated-Dishwasher-fig-1 \(21\) BOSCH-SMH4HVX00G-60cm-Fully-Integrated-Dishwasher-fig-1
\(22\)

Before using for the first time, read the instruction manual and the safety information it contains.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals