Gigavino YY400 4 In 1 Digital Drinking Water Meter User Manual

Gigavino YY400 4 In 1 Digital Drinking Water Meter

LOWBATT

ELECTRODE

TROUBLESHOOTING

In the power on state, first press and hold the hold / temp key and mode / CAL key at the same time, and do not release them in the middle. After the screen displays “del”, release all keys to restore the factory setting.

Attention

1. lt has been calibrated by factory. use it directly.
2. After finished ,clean the electrode with pure water and keep it dry.
3. Stir gently several times to ensure no air bubble around the electrode.
4. Don’t disassemble the meter without permission to avoid damage.
5. Keep it dry.
6. lf pH calibration is wrong, please reset.

Warranty

The meter is warranted to be free from defects in material and workmanship for a period of three years from the date of purchase. The warranty covers normal operation but doesn’t cover Man-made damage. Proof of purchase is required for warranty repairs. Warranty is void if the meter used to be taken apart.

Return Authorization

Authorization must be obtained from the supplier before returning items for any reason. When requiring a return authorization, please include data regarding the defective reason. the meter is to be returned along with good packing to prevent any damage in shipment and insured against possible damage or loss.

Product description

• pH- 03/618/K13 pH/TE\!P
• S- 100 TDS/EC/SALT/TEMP
• EZ9901 / 986 TDS/pH/TEMP
• EZ9902/983 EC/pH/TEMP
• EZ9908 / 686 TDS/EC/pH/TEMP
• EZ9910 TDS/pH/ORP/EC/TEMP
• EZ9909SP TDS/EC/pH/SALT/TEMP
• C- 200 / YY 400 pH/H,/ORP /TEMP
• YY-400H lb/TEMP
• C- 600 IL/TDS/EC/pH/SALT/S.G/ORP/TEMP
• JQ-006 H,/T!lS/EC/pH/SALT/S. G/ORP/TEMP Ω · m I fertile

SCREEN DISPLAY

— Hold and Battery Indicator
— Testing Values
– – ppm/ppt/ppb
— μSiem and mS/cm
— %
— pH
— °C/°F
— s.G
— mV
— Ω·m

BUTTON

• Power Button

• Hold and Temperature shift button

• Mode and Calibration shift button

• Adjust values up/down in calibration step

OPERATION

HOLD/TEMP.SHIFT

MODE SHIFT

Fertility:
indicates “1” lack of fertilizer,
indicates “2” moderate,
indicates “3” over fertilizer

PARAMETER

pH CALIBRATION

CALIBRATION ( EC/TDS/SALT )

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>