Clear-Com Eclipse HX-Omega Announces Fibre Networked Intercom System User Guide

Clear-Com Eclipse HX-Omega Announces Fibre Networked Intercom System

Product Information

The Eclipse HX-Omega, Eclipse HX-Median, and Eclipse HX-PiCo are communication systems that can be upgraded to their respective versions. Please note that if you are upgrading your PiCo to an HX-PiCo, you need to contact your Clear-Com representative to determine if your hardware is HX-ready. If not, the upgrade can only be done at the factory.

Upgrade Pack Contents

• Eclipse HX-Omega
• Eclipse HX-Median
• Eclipse HX-PiCo

Clear-Com Contacts
If you encounter any issues, please contact your local Clear-Com support office:

• Americas and Asia-Pacific Headquarters: California, United States;
• Tel: +1.510.337.6600;
• Email: [email protected].
• Europe, Middle East, and Africa Headquarters: Cambridge, United Kingdom; Tel: +44 1223 815000; Email: [email protected]
• Canada Office: Quebec, Canada; Tel: +1 450-653-9669
• China Office: Beijing Representative Office, Beijing, P.R.China; Tel: +8610 65811360/65815577

Software/Firmware Components
The software/firmware components for Eclipse HX-Omega, Eclipse HX-Median, and Eclipse HX-PiCo are listed below:

• USB Software: T12632-1N1 Rev A
• USB Drivers: T12632-1A1 Rev AA
• DVD Software: T12889-1N1 Rev A
• DVD Drivers: T12889-1A1 Rev P

User Documentation
User documentation for all Eclipse products and EHX is available on the ECLIPSE HX 13.1.0 SYSTEM SOFTWARE & DOCUMENTATION USB and DVD, and from the Clear-Com website at: Clear-Com > Service & Support.

Appendix A: Eclipse HX Omega / Median / Delta / PiCo FreeSpeak II/ FreeSpeak EDGE Software & Driver Components
The following components are listed in Appendix A:

• Drivers
• Software
• Device
• File Type
• Rev
• Issue
• Last updated

Product Usage Instructions

Eclipse HX-Omega and HX-Median Upgrade Steps
To upgrade your system to Eclipse HX-Omega or Eclipse HX-Median, follow these steps:

1. Step 1
2. Step 2
3. Step 3
4. Step 4
5. Step 5

Eclipse HX-PiCo Upgrade Steps
To upgrade your PiCo to Eclipse HX-PiCo, follow these steps:

1. Step 1
2. Step 2
3. Step 3
4. Step 4
5. Step 5

FAQ

• Q: How do I determine if my PiCo hardware is HX-ready?
  A: To determine if your PiCo hardware is HX-ready, please contact your Clear-Com representative.

• Q: Can I upgrade my PiCo to HX-PiCo if my hardware is not HX-ready?
  A: No, if your PiCo hardware is not HX-ready, the upgrade can only be done at the factory.

Document Reference

• Clear-Com Eclipse HX System Upgrade Guide Supplement
• PN: PUB-00239 Rev A

Legal Disclaimers

• Copyright © 2023 HME Clear-Com Ltd.
• All rights reserved.

Clear-Com, the Clear-Com logo, and Clear-Com Concert are trademarks or registered trademarks of HM Electronics, Inc. The software described in this document is furnished under a license agreement and may be used only in accordance with the terms of the agreement. The product described in this document is distributed under licenses restricting its use, copying, distribution, and decompilation/reverse engineering. No part of this document may be reproduced in any form by any means without prior written authorization of Clear-Com, an HME Company.

Clear-Com Offices are located in California, USA; Cambridge, UK; Montreal, Canada; and Beijing, China. Specific addresses and contact information can be found on Clear-Com’s corporate website: www.clearcom.com

Clear-Com Contacts

Americas and Asia-Pacific Headquarters

• California, United States
• Tel: +1.510.337.6600
• Email: [email protected]

Europe, Middle East, and Africa Headquarters

• Cambridge, United Kingdom
• Tel: +44 1223 815000
• Email: [email protected]

Canada Office

• Quebec, Canada
• Tel: +1 450-653-9669

China Office

• Beijing Representative Office Beijing, P.R.China
• Tel: +8610 65811360/65815577

Introduction

This guide covers upgrading the Eclipse Omega, Eclipse Median, and Eclipse PiCo systems to Eclipse HX-Omega, Eclipse HX-Median, and Eclipse HX-PiCo respectively.

Note:
If you are upgrading your PiCo to an HX-PiCo please contact your Clear-Com representative to establish if your hardware is HX-ready. If your PiCo hardware is not HX-ready, then this is a factory-only upgrade.

This Eclipse HX-Omega upgrade pack contains:

• ECLIPSE HX 13.1.0 SYSTEM SOFTWARE & DOCUMENTATION USB – T12632-1N1
• ECLIPSE HX 13.1.0 SYSTEM SOFTWARE & DOCUMENTATION DVD – T12889-1N1
• ECLIPSE SYSTEM DRIVERS USB – T12632-1A1
• ECLIPSE SYSTEM DRIVERS DVD – T12889-1A1
• ECLIPSE HX DOOR – T10607-2
• ECLIPSE HX DOOR HINGE SCREWS x 4 – 280432Z
• ECLIPSE HX-OMEGA MASKING LABEL – 375G037
• ECLIPSE CPU CARD CODE EPROM x 2 – 795002Z
• 256MB SDRAM MODULE x 2 – 481508Z
• MVX16A H8 PROGRAMMING CABLE – CAB-MVX-48Z
• FREESPEAK TO PC DATA CABLE – PD4007Z
• CPU-208 BATTERY & HOLDER KIT x 2 – CPU-208-BAT
• THIS UPGRADE GUIDE SUPPLEMENT – PUB-00239

This Eclipse HX-Median upgrade pack contains:

• ECLIPSE HX 13.1.0 SYSTEM SOFTWARE & DOCUMENTATION USB – T12632-1N1
• ECLIPSE HX 13.1.0 SYSTEM SOFTWARE & DOCUMENTATION DVD – T12889-1N1
• ECLIPSE SYSTEM DRIVERS USB – T12632-1A1
• ECLIPSE SYSTEM DRIVERS DVD – T12889-1A1
• ECLIPSE HX DOOR – T10607-2
• ECLIPSE HX DOOR HINGE SCREWS x 4 – 280432Z
• ECLIPSE HX-MEDIAN MASKING LABEL – 375G036
• ECLIPSE CPU CARD CODE EPROM x 2 – 795002Z
• 256MB SDRAM MODULE x 2 – 481508Z
• MVX16A H8 PROGRAMMING CABLE – CAB-MVX-48Z
• FREESPEAK TO PC DATA CABLE – PD4007Z
• CPU-208 BATTERY & HOLDER KIT x 2 – CPU-208-BAT
• THIS UPGRADE GUIDE SUPPLEMENT – PUB-00239

This Eclipse HX-PiCo upgrade pack contains:

• ECLIPSE HX 13.1.0 SYSTEM SOFTWARE & DOCUMENTATION USB – T12632-1N1
• ECLIPSE HX 13.1.0 SYSTEM SOFTWARE & DOCUMENTATION DVD – T12889-1N1
• ECLIPSE SYSTEM DRIVERS USB – T12632-1A1
• ECLIPSE SYSTEM DRIVERS DVD – T12889-1A1
• ECLIPSE HX-PICO MASKING LABEL – 375G038
• ECLIPSE PICO BOOT EPROM x 1 – 795014Z
• 256MB SDRAM MODULE x 1 – 481508Z
• MVX16A H8 PROGRAMMING CABLE – CAB-MVX-48Z
• FREESPEAK TO PC DATA CABLE – PD4007Z
• BATTERY 3V LI – 400033Z
• THIS UPGRADE GUIDE SUPPLEMENT – PUB-00196

PLEASE NOTE:
ALL CHANGES ARE MADE CONCERNING THE ECLIPSE HX UPGRADE GUIDE – P/N PUB-00238 – WHICH CAN BE FOUND ON THE ECLIPSE HX SYSTEM SOFTWARE AND DOCUMENTATION USB AND DVD

Note:
This upgrade requires a competent engineer. Specialist tools and additional cables may be required that are not supplied – see the Eclipse HX Upgrade Guide.

If there are any issues, please contact your local Clear-Com support office.

ECLIPSE HX-OMEGA and HX-MEDIAN UPGRADE STEPS

Carry out the following steps to upgrade your system.

• Install EHX on your PC.
• Install the door.
• Apply the masking label to the back of the unit completely covering it:
  • “ECLIPSE OMEGA” with “ECLIPSE HX-OMEGA” or
  • “ECLIPSE MEDIAN” with “ECLIPSE HX-MEDIAN” or
• Change the CPU Card(s) PROM
• Chang the CPU Card(s) RAM
• Change the CPU Card(s) DIP switches to set the Matrix type.
• Upgrade the CPU Card(s) application Code.
• Upgrade the CPU Card(s) CPLD code
• Upgrade the MVX, IVC, E-QUE, LMC, E-FIB cards application, and FPGA code as appropriate.
• Upgrade the V-Series panels using the TFTP method.
• Upgrade the I-Station panels using the EHX method.

ECLISPE HX-PICO UPGRADE STEPS

Note:
If you are upgrading your PiCo to an HX-PiCo please contact your Clear-Com representative to establish if your hardware is HX-ready. If your PiCo hardware is not HX-ready, then this is a factory-only upgrade.

Carry out the following steps to upgrade your system.

• Install EHX on your PC.
• Apply the masking label to the back of the unit completely covering it:
  • “ECLIPSE PICO” with “ECLIPSE HX-PICO”
• Change the Eclipse HX-PiCo PROM.
• Upgrade the Eclipse HX-PiCo RAM.
• Change the Eclipse HX-PiCo DIP switches to set the Matrix type.
• Upgrade the Eclipse HX-PiCo Application Code.
• Upgrade the Eclipse HX-PiCo MVX boot and/or application code.
• Upgrade the V-Series panels using the TFTP method.
• Upgrade the I-Station panels using the EHX method.

For Reference:

• The software/firmware components for Eclipse HX-Omega / HX-Median / HX-PiCo are listed in Appendix A below.
• The documentation for Eclipse HX-Omega / HX-Median / HX-PiCo is listed in Appendix B below.

Tip:
User documentation for all Eclipse products and EHX is available on the ECLIPSE HX 13.1.0 SYSTEM SOFTWARE & DOCUMENTATION USB and DVD, and from the Clear-Com website at: Clear-Com > Service & Support.

Note:
This upgrade requires a competent engineer. Specialist tools and additional cables may be required which are not supplied – see the Eclipse HX Upgrade Guide.

If there are any issues, please contact your local Clear-Com support office.

Eclipse HX Omega/Median/Delta/PiCo FreeSpeak II/FreeSpeak EDGE Software &

Driver Components

USB

• Software = T12632-1N1 Rev A
• Drivers = T12632-1A1 Rev AA

DVD

• Software = T12889-1N1 Rev A
• Drivers = T12889-1A1 Rev P

 |

Part No

|

Description

|

Device

|

File Type

|

C/Sum

|

Rev

|

Issue

| Last updated
---|---|---|---|---|---|---|---|---
Drivers| 710801Z| 4216 CUSTOM INTERFACE PANEL (V3 RELEASE)|  | S Record| E400H| B| BDH54M| Pre v4.2
Drivers| 790016Z| 4222E BBH54P APP CODE, 2RU 32 PB ID| NA| 4kp| FFDE452E| A| BBH54P| v5.2.4
Drivers| 790017Z| 4222E COAX BBG54P APP CODE, 2RU 32 PB ID|  | 4kp| FFE762DF| A| BBG54P| v5.2.4
Drivers| 710703Z| 4222E/4212E PANEL BOOT CODE|  | S| n/a| A| BR_60E| Pre v4.2
Drivers| 710799Z| 4222E/4212E PANEL BOOT CODE (UNLEADED)|  | S| n/a| A| BR_70G| Pre v4.2
Drivers| 710847Z| 4224E/4226E/4294E/4215E COAX PANEL|  | 4kp| FFE5EF43| 1 / A| PBG54M| Pre v4.2
Drivers| 710705Z| 4224E/4226E/4294E/4215E PANEL BOOT CODE|  | S| n/a| A| PR_60E| Pre v4.2
Drivers| 710800Z| 4224E/4226E/4294E/4215E PANEL BOOT CODE (UNLEADED)|  | S| n/a| A| PR_70G| Pre v4.2
Drivers| 710704Z| 4224E/4226E/4294E/4215E PANEL CODE| NA| 4kp| FFDB8081| C| PBH54M| Pre v4.2
Drivers| 710802Z| 4230 VERTICAL EXTENSION PANEL (V3 RELEASE)|  | MOT| NA| A| HDH10H| Pre v4.2
Drivers| 710813Z| AES-6 APPLICATION CODE| AES-6 (710785Z)| MOT| n/a| 3 / C| 2.02| v5.2.2
Drivers| 710814Z| AES-6 XILINX CODE| AES-6 (710785Z)| MCS| 0x010c84be| H| H| v7.6.0B
Drivers| 710858Z| AES-6-3K XILINX FIRMWARE| AES-6 (710785Z)| MCS| FFB55407| 2 / B| 2| v5.1.1
Drivers| 790001Z| CONFIG CARD BOOT EPROM CODE OMEGA & MEDIAN ECLIPSE| ST 27W201| S Record| 5468| B| 2.4.22.0| v7.0.0 A
Software| 780G063| CONFIG CARD SECONDARY BOOT CODE|  | FWR| n/a| A| 18.76.71.0| v10.0.0A
Drivers| 710622Z| CONFIG CARD U1 CPLD CODE| XC9572| JED| 681F| D| 0.4.21.0| v7.1.0 A
Drivers| 710623Z| CONFIG CARD U53 CPLD CODE| XC95144| JED| 330F| B| 0.2.27.0| v7.1.0 A
Drivers| 710624Z| CONFIG REAR CARD CPLD CODE| XC9572| JED| 9411| 4 / D| C| Pre v4.2
Drivers| 710644Z| DIG-2 FRONT CARD APPLICATION CODE|  | S19| n/a| 1 / A| B| Pre v4.2
Drivers| 710906Z| DIG-2 FRONT CARD CPLD CODE| Lattice 1016E| JED| 0C8A| 1 / A| A| Pre v4.2
---|---|---|---|---|---|---|---|---
Drivers| 710643Z| DIG-2 REAR CARD CPLD (U8) CODE| XC95288XL| JED| 3.50E+08| 1 / A| A| Pre v4.2
Drivers| 710633Z| ECLIPSE 32 BOOT PROM CODE|  | S Record| 3294| E| 2.4.23| v7.0.0 A
Drivers| 710659Z| ECLIPSE 32 FPGA CODE| XCF04| MCS| 0119AA3| E| 1.5.19| v7.0.0 A
Drivers| 710660Z| ECLIPSE 32 GLUE LOGIC CPLD| XC9572| JED| AB52| E| E| v7.0.0 A
Drivers| 710661Z| ECLIPSE 32 GPIO LOGIC| XC95144| JED| 6417| 2 / B| B| Pre v4.2
Software| SOF- 00217| ECLIPSE HX CFG CARD APP OMEGA, MEDIAN, DELTA|  | FWR| n/a| A| 32.116.2.0| v13.1.0A
Software| SOF- 00215| ECLIPSE HX CONFIG|  | .EXE| n/a| B| 32.118.1.0| v13.1.0A
Software| SOF- 00216| ECLIPSE HX DYNAM-EC|  | .EXE| n/a| A| 23.24.4.0| v13.1.0A

Software

|

SOF- 00219

|

ECLIPSE HX INSTALLER EHX & DYNAM-EC

|  |

.EXE

|

n/a

|

B

| V1.1

EHX 32.118.1.0

Dynam-EC 23.24.4.0

|

v13.1.0A

Software| SOF- 00218| ECLIPSE HX PICO APP|  | FWR| n/a| A| 32.116.3.0| v13.1.0A
Drivers| 710848Z| ECLIPSE SERIAL CONFIG UPLOADER|  | .EXE| n/a| 1 / A| 2.0.1| Pre v4.2

Drivers

|

780G048 BNII_064

|

E-DANTE64-HX BROOKLYN II FPGA/APP/CFG COMBINED

|  |

.dnt

|

n/a

|

E

| BKLYN II App 4.2.3.13 BKLYN II FPGA 4.0.4.2 CC App 1.3.61.0

Config 1.6.0

|

v13.1.0A

Drivers

|

780G048 BN3_064

|

E-DANTE64-HX BROOKLYN 3 FPGA/APP/CFG COMBINED

|  |

.dnt

|

n/a

|

E

| BKLYN 3 App         4.2.4.8

BKLYN 3 FPGA       4.2.0.25

BKLYN ROM/Boot 4.2.4

Config 2.1.0

|

v13.1.0A

Drivers| SOF-00178| E-DANTE64-HX MK I & II H8 Application|  | .fwc| n/a| A| 1.6.58.0| v13.0.0A
Drivers| SOF-00179| E-DANTE64-HX MK I & II H8 Boot|  | .fwc/.mot| n/a| A| 1.6.57.0| v13.0.0A

Drivers

|

SOF-00180

|

E-DANTE64-HX MK II & II H8 APP & BOOT COMBINED

|  |

.mot

|

n/a

|

A

| H8 APP      1.6.58.0

H8 BOOT  1.6.57.0

|

v13.0.0A

Drivers| 780G043| E-DANTE64-HX H8 DSP|  | .fwc| n/a| A| 1.4.60.0| v8.8.0A
Drivers| 780G037| E-DANTE64-HX H8 MK-I FPGA|  | .fwc| n/a| E| 1.4.59.0| v13.0.0A
---|---|---|---|---|---|---|---|---
Drivers| SOF- 00159| E-DANTE64-HX H8 MK-II FPGA|  | .fwc| n/a| C| 2.13.88.0| v13.1.0A
Drivers| 710794Z| E-FIBER NETWORKING (REAR) FPGA|  | MCS| 010f82f5c| 4 / D| 1.23| v5.1.1
Drivers| 710793Z| E-FIBER ROUTER (FRONT) FPGA|  | MCS| 010f73f00| 4 / D| 1.21| v5.1.1

Drivers

|

SOF- 00224

|

E-IPA-HX APPLICATION FIRMWARE

|  |

.ccf

|

n/a

|

A

| App 8.58.63.0

Boot 2.0.65.08

FPGA 19.31.64.0

QSPI: v.3.0.6- b114

|

v13.1.0A

Drivers

| SOF– 00181|

E-MADI CARD APP

|  |  |

n/a

|

A

|

1.7.9.0

|

v13.0.0A

Drivers| SOF-00182| E-MADI CARD BOOT|  |  | n/a| A| 1.7.8.0| v13.0.0A
Drivers| 790012Z| E-MADI CARD DSP|  |  | n/a| A| 1.4.11| v5.2.4
Drivers| 790009Z| E-MADI CARD FPGA|  |  | 0x16faba7e| F| 1.13.12.0| v10.0.0D

Drivers

|

SOF-00183

|

E-MADI MK-I, II and III H8 BOOT/APP COMBO

|  |  |  |

A

| H8 Boot 1.7.8.0

H8 App 1.7.9.0

|

v13.0.0A

Drivers| 780G041| E-MADI MK-II FPGA|  | MCS, SVF, FWC| 0x169b804c| E| 2.6.62.0| v10.0.0D
Drivers| SOF-00160| E-MADI MK-III FPGA|  | MCS, SVF, FWC| n/a| A| 3.2.89.0| v13.0.0A
Drivers| 785G053| E-QUE APP MK-I & MK-II ECLIPSE|  | .IMAGE| n/a| H| 7.36.5.0| v13.1.0A
Drivers| 710810Z| E-QUE BOOT ROM CODE|  | SREC| DBB8| 2 / B| 1.4| v5.0.3
Drivers| 710807Z| E-QUE MK-I FPGA| XCF16PVO48C| MCS, SVF| 0x11a2d405| J| 0.25.16.0| v10.0.0A
Drivers| 790004Z| E-QUE MK-II BOOT ROM CODE|  | BIN| n/a| A| 1.8.13.0| v5.2.4
Drivers| 790006Z| E-QUE MK-II FPGA|  | MCS, SVF| 0x119ef9f8| C| 1.5.17.0| v10.0.0A
Drivers| 710582Z| E-STATION FLASH CODE| MMC2107-144| S19| B2AB| A| 2.3| Pre v4.2
Drivers| 710581Z| E-STATION MICRO-P BOOT CODE| MMC2107-144| S19| FD2D| A| 2.3| Pre v4.2
Drivers| SOF- 00004| FreeSpeak EDGE BELTPACK APPLICATION FIRMWARE|  | tar.gz| n/a| E| App 5.4.79.0

Boot 1.1.80.0

| V13.1.0A
 |  |  |  |  |  |  | Baseband 0054-0054|
---|---|---|---|---|---|---|---|---

Drivers

|

780G071

|

FreeSpeak EDGE TCVR APPLICATION FIRMWARE

|  |

tar.gz

|

n/a

|

H

| App 4.29.77.0

Boot 1.0.78.7

FPGA v.0.6.2-b102 QSPI32                          v.2.3.5-b0-cb

Baseband 0054-0054-0034- 0034

|

v13.1.0A

Drivers| 780G004| FreeSpeak II 1.9 ANTENNA APPLICATION FIRMWARE|  | FWW,FWS| n/a| H| 2.7.28.0| v12.0.0A

Drivers

|

780G003

|

FreeSpeak II 1.9 BELTPACK APPLICATION FIRMWARE

|  |

FWW,FWS

|

n/a

|

AB

| 5.3.32.0

BT CSR App 1.16.32.0

|

v13.1.0A

Drivers| 780G026| FreeSpeak II 2.4 ANTENNA FIRMWARE|  | FWW,FWS| n/a| C| 2.2.49.0| v11.1.0A
Drivers| 780G025| FreeSpeak II 2.4 BELTPACK APPLICATION FIRMWARE|  | FWW,FWU,FWS| n/a| N| 2.33.50.0| v13.0.0A

Drivers

|

780G065

|

FreeSpeak II IP 1.9 TRANSCEIVER RELEASE APPLICATION FIRMWARE

|  |

.ccf

|

n/a

|

R

| App 6.8.67.0

Boot 2.0.68.9

Baseband 0125

FPGA v.0.6.2-b102

QSPI v.2.3.5-b0-cb

|

v13.1.0A

Drivers

|

710907Z

| FSBP CELLCOM / FreeSpeak ANTENNA AND BELTPACK BOOTLOADER|  |

.MOT

|

n/a

|

A

|

1a

|

Pre v4.2

Drivers| 790008Z| FSBP DECT STACK FS-BPJ, FreeSpeak|  | .HEX| n/a| A| c6983_dect_hw_pp_V26_K19| v5.2.4
Drivers| 710831Z| FSBP FreeSpeak BELTPACK RM5 DECT STACK|  | .HEX| n/a| 2 / B| c6657_dect_hw_pp_v22_rm5| Pre v4.2
Drivers| 710828Z| FSBP MK I KIRK 6 PAGE BP APP|  | .MOT| n/a| R| 2K000279| v8.5.2A
Drivers| 710827Z| FSBP MK II – KIRK MODULE – APP CODE|  | .MOT| n/a| R| 3K010279| v8.5.2A
Drivers| 710830Z| FSBP MK II – KIRK MODULE – DECT CODE|  | .HEX| n/a| 1 / A| C6983_dect_hw_pp_v22_k19| Pre v4.2
Drivers| 710632Z| ICS-1016/1008 STATION CODE|  | .4KP, .BIN| A865| 4 / D| 10112| Pre v4.2
Drivers| 710615Z| ICS-2003 FRONT PANEL VFD FIRMWARE| 18F242| HEX| 104| B| 1.1| Pre v4.2

Drivers

|

710451Z

| ICS-2003TE FPGA DNIC FRAMER COM-20 DIGITAL 2-WIRE COM. MODULE|

QL2007-OPF144C

|

CHP, RPT

|

5270DC

|

A

|

A

|

Pre v4.2

Drivers| 710537Z| IMF-3 BACKPLANE PIC FIRMWARE| PIC16F505| HEX| 88F8| B| 1.2| Pre v4.2
Drivers| 785G045| I-STATION APP CODE, ECLIPSE| N/A| FWP| n/a| C| 20901| v9.0.0A
---|---|---|---|---|---|---|---|---
Drivers| 710663Z| I-STATION EXPANSION PANEL CODE (E-STATION)| NA| 4kp/Hex/s19| FF9DBCAD| C| 10116| v8.5.0A

Drivers

|

710652Z

|

I-STATION I-1100 CPLD

| EPM3032ATC44- 10N|

POF

|

72059

|

A

|

1

|

Pre v4.2

Drivers| 710544Z| I-STATION MASTER STATION FLASH CODE| 29LV200| S19| 477C| D| 2.3.9| Pre v4.2
Drivers| 780G018| I-STATION MICRO-C BOOT CODE| MMC2107-144| S19| n/a| A| 6| v8.0.0A
Drivers| 710547Z| I-STATION PCI CODE| PIC17C752| HEX| 228A| A| A| Pre v4.2
Drivers| 780G012| MVX-HX APP ECLIPSE OMEGA/MEDIAN & PICO|  | FWC| n/a| C| 2.62.7.0| v12.1.0A
Drivers| 780G015| MVX-HX BOOT ECLIPSE OMEGA/MEDIAN & PICO|  | FWC, MOT| n/a| A| 2.57.6.0| v10.0.0D
Drivers| 780G011| MVX-HX COMBINED BOOT & APP H8 FLASH, ECLIPSE & PICO|  | BIN, MOT| n/a| C| 2.62.7.0 & 2.57.6.0| v12.1.0A
Drivers| 710625Z| MVX-HX MK-I FPGA PROM CODE ECLIPSE| XC18V04| MCS| 031F12B9| J| 1.2.18.0| v7.0.0 A

Drivers

|

780G010

|

MVX-HX MK-II FPGA FLASH MVXMK2

|  |

.MCS

| MCS

0x33d8c7d2 Flash 0x000487a39

|

D

|

2.10.47.0

|

V12.2.0A

Drivers| 710824Z| PD2201 ACTIVE ANTENNA RM5 APPLICATION|  | .MOT| n/a| 2 / B| AA_AR0020i| Pre v4.2
Drivers| 710826Z| PD2201 ACTIVE ANTENNA RM5 DECT STACK|  | .HEX| n/a| 2 / B| c6657_hw_fp_v21_rm5| Pre v4.2
Drivers| 710823Z| PD2201 ANTENNA – KIRK ACTIVE ANTENNA APP|  | .MOT| n/a| A| AA_AK000206| v7.6.0A
Drivers| 710825Z| PD2201 ANTENNA – KIRK MODULE – DECT CODE|  | .HEX| n/a| 1 / A| c6983_dect_hw_fp_v21_k19| Pre v4.2
Drivers| 790007Z| PD2201 DECT STACK PD2201J, FreeSpeak|  | .HEX| n/a| A| c6983_dect_hw_fp_V26_K19| v5.2.4
Drivers| 710836Z| PD2202 RM5 – 1-6 PAGE BELTPACK APP|  | .MOT| n/a| 8 / J| 1R010215| v5.2.2
Drivers| 710853Z| PD2202/FS BP I RM5 6 PAGE BP APP|  | .MOT| n/a| 7 / H| 2R010215| v5.2.2
Drivers| 710829Z| PD2203 ANTENNA SPLITTER APPLICATION|  | .MOT| n/a| 1 / A| SP0x010C| Pre v4.2
Software| 780G064| PICO SECONDARY BOOT CODE|  | FWR| n/a| A| 18.76.72.0| v10.0.0A
Drivers| 710756Z| TEL-14 PROC. ADAPT. APPLICATION S/W| 89LPC935| HEX| NA| 2 / B| 1.1| Pre v4.2
Drivers| 710657Z| TW-60 FIRMWARE| 18F442| HEX| 8F81| B| 1| Pre v4.2
 |

Part No

|

Description

|

Device

|

File Type

|

C/Sum

|

Rev

|

Issue

| Last updated
---|---|---|---|---|---|---|---|---

Drivers

|

SOF- 00112

|

V-IRIS-SERIES MAIN APPLICATION

|  |

.ccf

|

n/a

|

C

| App 6.73.73.0

Boot 1.0.74.07

FPGA v.0.6.2-b102;

QSPI v.2.3.5-b0-cb

Module App 2.0.81.20

Kernel 4.4.32.0 .0-rt41

|

v13.1.0A

Drivers| 790039Z| V-SERIES PANEL DISPLAY PIC APPLICATION CODE, V-SERIES|  | HEX,FWP,4KP| n/a| D| 0.48| v9.1.0A
Drivers| 710815Z| V-SERIES PANEL DISPLAY PIC BOOT LOADER CODE|  | 4KP, HEX, FWP| n/a| 3 / C| 2| v5.1.3
Drivers| 780G014| V-SERIES PANEL KERNEL, V SERIES|  | vmImage| n/a| B| 2.6.24| v9.0.0A
Drivers| 780G013| V-SERIES ROOT FILE SYSTEM, V SERIES|  | rootfs.cramfs| n/a| B| Dec_19_16| v9.0.0A
Drivers| 710859Z| V-SERIES T-ADAPTER CARD FIRMWARE|  | .LDR| n/a| 1 / A| 1| v5.1.1
Drivers| 710817Z| V-SERIES UBOOT TFTP IMAGE|  | LDR| n/a| I| 0.31.0| v10.0.0D

Drivers

|

785G046

|

V-SERIES V-PANEL APP, ECLIPSE

|  | FWP, JFFS2, 4KR|

n/a

|

K

|

4.11.0

|

v12.0.0A

Drivers| 780G032| FSII-SPL ANTENNA SPLITTER APP|  | FWW, FWS| n/a| A| 1.2.36.0| V8.0A
Drivers| SOF-00131| FS II SPLITTER MK-II APP|  | MOT| n/a| A| 1.1.87.0| V13.0.0A
Drivers| SOF-00163| FSII SPLITTER MK-II FPGA|  | JED| 0x916B| A| A| V13.0.0A

Eclipse HX Omega/Median/PiCo/FreeSpeak II/FreeSpeak EDGE Documentation

Note:
All documentation is on the ECLIPSE HX 13.1.0 Rev A SYSTEM SOFTWARE & DOCUMENTATION USB and DVD

USB

• Doc T12632-1N2 Rev A

DVD

• Doc T12889-1N2 Rev A

Part No

|

Description

|

Rev

|

Doc Issue

|

Last Updated

---|---|---|---|---

810412Z

|

ACTIVE ANTENNA SYNCHRONIZATION PROCEDURE

|

1 / A

|

1

|

v5.1.1

810383Z

|

AES-6 INTERFACE INSTRUCTION MANUAL

|

2 / B

|

2

|

v5.0.1

PUB-00011

|

AOIP NETWORK RECOMMENDATIONS GUIDE

|

D

|

D

|

v13.1.0A

810403Z

|

BAL-8 TRANSFORMER GROUND ISOLATION INTERFACE MANUAL

|

1 / A

|

1

|

v4.2

810307Z

|

CCI-22 DUAL PARTY-LINE INTERFACE INSTRUCTION MANUAL

|

3 / C

|

3

|

v4.2

810372Z| CELLCOM / FreeSpeak WIRELESS SYSTEM UPGRADE MANUAL| J| J| v5.2.4
810311Z| DIF-102 / DIG-2 DIGITAL INTERFACE INSTRUCTION MANUAL| 2 / B| 2| v4.2

PUB-00234

|

ECLIPSE HX CONFIG SW GUIDE

|

A

|

A

|

v13.1.0A

PUB-00241

|

ECLIPSE HX CUSTOMER RELEASE NOTE

|

A

|

A

|

v13.1.0A

399G050

|

ECLIPSE HX DELTA PSU BRACKET MOUNTING INSTRUCTIONS

|

B

|

B

|

v13.1.0A

399G035

|

ECLIPSE HX DELTA SAFETY INSTRUCTIONS

|

A

|

A

|

v7.1.0 A

PUB-00235| ECLIPSE HX DELTA USR GUIDE| A| A| v13.1.0A
399G265| ECLIPSE HX DYNAM-EC QSG| A| A| v10.0.0A

PUB-00231

|

ECLIPSE HX DYNAM-EC USER GUIDE

|

A

|

A

|

v13.1.0A

---|---|---|---|---

399G261

|

ECLIPSE HX E-IPA-HX LICENSING QSG

|

A

|

A

|

v10.0.0A

PUB-00229| ECLIPSE HX FRAME INSTALLATION GUIDE| A| A| v13.1.0A
399G222| ECLIPSE HX ICS 1008E/1016E USER GUIDE| A| A| v9.0.0A

399G223

|

ECLIPSE HX ICS 22 SPKR PANEL GUIDE

|

A

|

A

|

v9.0.0A

399G207

|

ECLIPSE HX I-PNL USER GUIDE

|

A

|

A

|

v9.0.0A

PUB-00189

|

ECLIPSE HX LOGIC GUIDE

|

A

|

A

|

v13.0.0A

PUB-00237

|

ECLIPSE HX MEDIAN USR GUIDE

|

A

|

A

|

v13.1.0A

PUB-00236| ECLIPSE HX OMEGA USR GUIDE| A| A| v13.1.0A
399G299| ECLIPSE HX PICO USER GUIDE| A| A| v11.1.0A

399G158

|

ECLIPSE HX QSG

|

A

|

A

|

v8.5.0A

399G046

|

ECLIPSE HX SAFETY INSTRUCTIONS

|

A

|

A

|

v7.1.0 A

399G291

|

ECLIPSE HX SAFETY INSTRUCTIONS

|

B

|

B

|

v12.0.0A

PUB-00238

|

ECLIPSE HX UPGRADE GUIDE

|

B

|

B

|

v13.1.0A

PUB-00239| ECLIPSE HX UPGRADE SUPPLEMENT GUIDE| A| A| v13.1.0A

Part No

|

Description

|

Rev

|

Doc Issue

|

Last Updated

---|---|---|---|---

PUB-00190

|

ECLIPSE HX V-PNL USR GUIDE

|

B

|

B

|

v13.1.0A

PUB-00064

|

ECLIPSE HX WIRELESS USER GUIDE

|

C

|

C

|

v13.1.0A

810376Z| ECLIPSE WIRELESS BELTPACK MANUAL| 4 / D| 4| v5.1.3
810319Z| FIM-102D MATRIX FIBER INTERFACE INSTRUCTION MANUAL| 1 / A| A| Pre v4.2

810291Z

|

FIM-108 MATRIX FIBER INTERFACE INSTRUCTION MANUAL

|

1 / A

|

A

|

Pre v4.2

810385Z

|

FIM-202D INSTRUCTION MANUAL

|

3 / C

|

3

|

v5.1.1

810385Z

|

FIM-202D MATRIX FIBER INTERFACE INSTRUCTION MANUAL

|

3 / C

|

3

|

v5.1.1

810306Z

|

FOR-22 DUAL 4-WIRE INTERFACE INSTRUCTION MANUAL

|

3 / C

|

3

|

v4.2

399G322| FreeSpeak EDGE BATTERY CHARGER QSG| A| A| V12.0.0A
399G326| FreeSpeak EDGE BELTPACK QSG| B| B| V12.0.0A

399G327

|

FreeSpeak EDGE TRANSCEIVER QSG

|

A

|

A

|

V12.0.0A

PUB-00020

|

FreeSpeak EDGE USER GUIDE

|

E

|

E

|

v13.1.0A

399G109

|

FreeSpeak II ANTENNA QSG

|

A

|

A

|

v7.6.0A

399G107

|

FreeSpeak II BELTPACK QSG

|

A

|

A

|

v7.6.0A

399G108| FreeSpeak II CHARGER QSG| A| A| v7.6.0A

810398Z

|

V-SERIES PANELS DESKTOP REFERENCE CARD

|

2 / B

|

2

|

v5.1.1

---|---|---|---|---

810397Z

|

V-SERIES PANELS PUSH KEY REFERENCE CARD

|

2 / B

|

2

|

v5.1.1

810396Z| V-SERIES PANELS RACK-MOUNT LEVER KEY REFERENCE CARD| 2 / B| 2| v5.1.1
810406Z| V-SERIES PANELS T OPTN INST MANUAL| 1 / A| 1| v5.1.1

810405Z

|

V-SERIES PANELS XLR4M TO XLR7M UPGD MANUAL

|

C

|

C

|

v7.5.0A

399G279

|

V-SERIES SAFETY INSTRUCTIONS

|

B

|

B

|

v12.0.0A

v13.1.0 Rev A – Eclipse HX System Upgrade Guide Supplement – PUB-00239 Rev A.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>