FIMCO 7771938 12V Wireless Remote Control Instruction Manual
- June 3, 2024
- FIMCO
Table of Contents
FIMCO 7771938 12V Wireless Remote Control
Operating instructions:
(Two) 2-Pin wire connectors, one for power-in and the other for power-out. Power-in connector is identified by the black and red wire. Power-out connector is identified by the blue and red wire. In addition, the power-in and power-out connectors are labeled on the receiver housing. The Power-in connector (black and red wire) will plug into the lead wire assembly connected to the power source usually from the operating vehicle. The Power-out (blue and red wire) will plug into the connector located on the pump. A red LED light will illuminate on the receiver once the connections are made, and power is applied. (If the red LED does not illuminate check for proper connections and power supply). With the red LED light illuminated, the pump can be operated using the on/off buttons on the remote.
General Information
Thank you for purchasing this product. The purpose of this guide is to assist you in installing, operating and maintaining your wireless remote
BEFORE RETURNING THIS PRODUCT FOR ANY REASON, PLEASE CALL 1-800-831-0027 MONDAY-FRIDAY, 8:00 AM TO 5:00 PM CST
If you should have a question or experience a problem with your Fimco Industries Product: Visit our website @ www.fimcoindustries.com or call the Toll free number above. Our technical support representatives will be happy to help you. In most cases a customer service rep. can resolve the problem over the phone. To obtain prompt, efficient service, always remember to give the following information
- Correct Part Description and/or part number
- Model number and Serial Number
Part descriptions and numbers can be obtained from the illustrated parts list section(s) of this manual.
For troubleshooting, the following needs to be checked:
- Terminals connected properly. Power-in connected to power source and power out connected to pump connector.
- Red LED light indicates power is connected properly.
- Check power source and fuse in Lead wire assembly if light does not illuminate.
Check 23A 12V battery in remote. Change out if necessary.
WARNING: To reduce the risk of injury, the user must read and understand
the operator’s manual before using this product.
WARNING: Cancer and Reproductive Harm.
www.P65Warnings.ca.gov
www.fimcoindustries.com
1000 FIMCO Lane, P.O. Box 1700, North Sioux City, SD 57049 Toll Free Phone:
800-831-0027 : Toll Free Fax:
800-494-0440 [(10/22)]
Specifications
- Model: 7771938
- Frequency: 315 MHz
- Modulation: ASK
- Voltage: DC 12V
FCC
Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void user’s authority to operate the
equipment. This device complies with Part 15 FCC rules. Operation is subject
to the following two condi-tions: (1) this device does not cause harmful
interference, and (2) this device must accept any interference received,
including in-terference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and if not installed and used in
accordance with the instruc-tions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to a radio or television reception, which can be deter-mined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or experienced radio/TV technician for help.
WARRANTY
LIMITED WARRANTY FOR NEW FIMCO, IND. EQUIPMENT WHO MAY USE THIS LIMITED
WARRANTY. This limited warranty (the “Limited Warranty”) is provided by Fimco,
Ind. to the original purchaser (“you”) of the Equipment (as defined below)
from Fimco, Ind. or one of Fimco, Ind.’s authorized dealers. This Limited
Warranty does not apply to any subsequent owner or other transferee of the
Equipment. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. WHAT THIS LIMITED
WARRANTY COVERS AND FOR HOW LONG. Fimco, Ind. warrants that any new Equipment
will be free from defects in material and workmanship for a period of one (1)
year (homeowner), 90 days (commercial user), after delivery of the Equipment
to you (the “Warranty Period”). The Warranty Period is not extended if Fimco,
Ind. repairs or replaces the Equipment. WHAT IS NOT COVERED BY THIS LIMITED
WARRANTY. This Limited Warranty does not apply to: (1) used Equipment; (2) any
Equipment that has been altered, changed, repaired or treated since its
delivery to you, other than by Fimco, Ind. or its authorized dealers; (3)
damage or deprecia-tion due to normal wear and tear; (4) defects or damage due
to failure to follow Fimco, Ind.’s operator’s manual, specifications or other
written instructions, or improper storage, operation, maintenance, application
or installation of parts; (5) defects or damage due to misuse, accident or
neglect, “acts of God” or other events beyond Fimco, Ind.’s reasonable
control; (6) accessories, attachments, tools or parts that were not manu-
factured by Fimco, Ind., whether or not sold or operated with the Equipment;
or (7) rubber parts, such as tires, hoses and grommets.
HOW TO OBTAIN WARRANTY SERVICE. To obtain warranty service under this Limited
Warranty, you must (1) provide written notice to Fimco, Ind. of the defect
during the Warranty Period and within thirty (30) days after the defect
becomes apparent or the repair becomes necessary, at the following address:
Fimco, Ind., 1000 Fimco Lane, North Sioux City, SD 57049; and (2) make the
Equipment available to Fimco, Ind. or an authorized dealer within a reasonable
period of time. For more information about this Limited Warranty, please call:
800-831-0027. WHAT REMEDIES ARE
AVAILABLE UNDER THIS LIMITED WARRANTY. If the conditions set forth above are
fulfilled and the Equipment or any part thereof is found to be defective,
Fimco, Ind. shall, at its own cost, and at its option, either repair or
replace the defective Equipment or part. Fimco, Ind. will pay for shipping and
handling fees to return the repaired or replacement Equipment or part to you.
LIMITATION OF IMPLIED WARRANTIES AND OTHER REMEDIES. THE REMEDIES DESCRIBED
ABOVE ARE YOUR SOLE AND EXCLUSIVE REMEDIES, AND FIMCO, IND.’S SOLE LIABILITY,
FOR ANY BREACH OF THIS LIMITED WARRANTY. TO THE EXTENT APPLICABLE, ANY IMPLIED
WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIM-ITED IN
DURATION TO THE WARRANTY PERIOD, AND THE REMEDIES AVAILABLE FOR BREACH THEREOF
SHALL BE LIMITED TO THE REMEDIES AVAILABLE UNDER THIS EXPRESS LIMITED
WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. IN NO EVENT SHALL FIMCO,
IND.’S LIABILITY UNDER THIS LIMITED WARRANTY EX-CEED THE ACTUAL AMOUNT PAID BY
YOU FOR THE DEFECTIVE EQUIPMENT, NOR SHALL FIMCO, IND. BE LIABLE, UNDER ANY
CIRCUMSTANCES, FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL OR PUNITIVE DAMAGES
OR LOSSES, WHETHER DIRECT OR INDIRECT. SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION
OR EXCLUSION MAY NOT APPLY TO YOU.