ZIHNIC ZN-S05 Open-Ear Wireless Bluetooth Headphones User Guide

ZIHNIC ZN-S05 Open-Ear Wireless Bluetooth Headphones

Product Information

Specifications

• Model: [insert model number]
• Compliance: FCC Part 15
• Power Source: [insert power source details]
• Dimensions: [insert dimensions]
• Weight: [insert weight]
• Color: [insert color options]

Product Usage Instructions

Installation

1. Place the equipment on a stable surface.
2. Connect the device to a power source using the provided cable.
3. Ensure proper ventilation around the equipment to prevent overheating.

Operation

1. Turn on the device using the power button.
2. Follow the on-screen instructions for initial setup.
3. Adjust settings as needed for optimal performance.

Maintenance

1. Regularly clean the device with a soft, dry cloth.
2. Avoid exposing the equipment to extreme temperatures or moisture.
3. Refer to the user manual for troubleshooting tips.

FAQ

Q: What should I do if the device is not powering on?

A: Check the power connection and ensure the outlet is functioning. If the issue persists, contact customer support.

Q: How do I reset the device to factory settings?

A: Navigate to the settings menu and look for the reset option. Follow the on-screen instructions to reset the device.

Q: Can I use third-party accessories with this product?

A: To ensure compatibility and safety, it is recommended to use accessories approved by the manufacturer.

Product Overview

Charging

Before using the ZIHNIC Open Free ZN-S05, please connect the Type-C cable to a power adapter to begin charging. Fully charge the earphones and the charging case before the first use.

Power On/Off

• When taken out of the charging case, the earphones will turn on and pair with each other automatically. To turn off the earphones, put them in the charging case, then the earphones will be turned off and start charging.

Pairing

• The earphones will turn on and pair with each other automatically when taken out of the charging case. A “Bluetooth mode” voice prompt will be heard after they pair successfully.
• For a new device connection, turn on the Bluetooth in your device and choose “ZN-S05 ” from the Bluetooth list to connect. You will hear “connected” after the earphones are paired to the device.
• If the earphones have been paired before, they will connect to the last paired device automatically after being turned on.

Wearing

• Put the ZIHNIC Open Free ZN-S05 onto your ears and rotate to fit comfortably to get the best wearing and sound quality experience.

MFB Operation

Reset

• When the power is on state, hit the touch keys of the headset 6 times (both left and right earphones), and the headset will automatically shut down and restore the factory settings.

Additional Operation

Attention

• Private replacement of batteries without permission is not recommended.
• Batteries [battery packs or battery combinations] should not be exposed to lighting, baking, or similar overheating environments.
• The input voltage and current standard ≤ 5V/1A when charging the headset charging compartment from an external power source;

FCC

FCC Requirement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

OPEN FREE EARPHONES

• Model: ZN-S05
• Brand: ZIHNIC
• Product Ident GmbH
• Hoferstasse 9B,71636 Ludwigsburg, Germany
• EVATOST CONSULTING LTD
• Suite 11, First Floor, Moy Road Business Centre, Taffs
• Well, Cardiff, Wales, CF15 7QRcontact@evatmaster.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>