TORIN AT32100B-U BIG RED 1500 LBs Engine Leveler Owner’s Manual

Table of Contents

TORIN-AT32100B-U-BIG-RED-1500-LBs-Engine-Leveler-
PRODUCT

Before Use:

Read the owner’s manual completely and understand the product and associated hazards.
Inspect the product before each use; do not use if any components are bent, broken, or cracked.

Operating Instructions:

WARNING: Do not exceed the rated capacity of 1500 pounds.

Ensure all bolts on the lifting beam and fasteners connected to the load are engaged and tightened before lifting.
Keep body and body parts away from under the lifted load at all times to prevent injury.

Q: What should I do before using the engine leveler?
- A: It is essential to read the owner’s manual thoroughly and inspect the product for any damages before each use.
Q: What is the maximum load capacity of the engine leveler?
- A: The maximum load capacity is 1500 pounds. Do not exceed this limit to ensure safe operation.
Q: How should I tighten the bolts on the lifting beam?
- A: Ensure all bolts are securely engaged and tightened according to the provided instructions to prevent accidents during lifting operations.

WARNING!

DO NOT CLIMB, HANG OR SWING. MISUSE OF ENGINE CRANE COULD RESULT IN A FALL THAT MAY RESULT I SEVERE INJURY!

DANGER KEEP OFF

WARNING

Maximum rated load is 1500 pounds.
Before lifting load, be sure all bolts on lifting beam and all fasteners connected to load are engaged and tightened.
Keep body and body parts from under lifted load at all times.
Failure to follow operating and safety instructions provided may result in personal injury or deth. Read instructions in operator’s manual

BEFORE USE

Before using this product, read the owner’s manual completely and familiarize yourself thoroughly with the product and the hazards associated with its improper use.
Inspect before each use. Do not use if bent, broken or cracked components are noted

WARNING: DO NOT LOAD BEYOND RATED CAPACITY

Block the vehicle’s wheels for lifting stability. Set the Parking Brake in the vehicle.
Position the jack near desired lift point.
Align the handle with the lowering valve on the engine crane making sure to align with lowering valve, turn the lowering valve to the CLOSED position until tight.
Ensure application is compatible with product.
Read, understand and follow engine removal and installation instructions provided by vehicle manufacturer service or shop manual.
This leveler is only to be used with an appropriately rated engine crane.
Connect the mounting chain on the leveler to the engine crane boom hook.
Chains used in conjunction with this product shall have a rated capacity greater than the rated capacity of the product.
Secure the (5) Chain with L-bracket assembly to appropriate lifting points.
Refer to vehicle manufacturer service or shop manual for the location of appropriate lifting points.
Ensure load is centered.
Secure the load to prevent inadvertent shifting and movement.
Adjust the angle of leveler by turning the crank handle of the leveler. (Fulcrum may pivot when lifting; use caution when lifting.)
After removing engine, immediately transfer the engine to appropriate engine support device (engine stand).
Check to ensure stand is secure before working on or around.