OC-WL001A LED Solar Motion Sensor Flood Lights User Manual

OC-WL001A LED Solar Motion Sensor Flood Lights

Product Specifications

• Country of Manufacture: China
• Model Number: TIPS
• Compliance: 2014/35/EU Low Voltage Directive (LVD)
• WEEE Number: DE 58715331
• Harmonized Standards Applied:
  • EMC: EN IEC 55015:2019/A11:2020, EN 61547:2009
  • LVD: EN 60598-2-4:2018, EN 60958-1:2015+A1:2018
• Distributor: Reichelt elektronik GmbH & Co. KG, Elektronikring 1, 26452 Sande, Germany
• Date of declaration: May 11, 2023

Product Usage Instructions

Safety Precautions:
Before using the product, carefully read all safety instructions provided in the manual.

Installation:
Ensure the product is installed following the installation guidelines provided in the manual.

Power supply:
Connect the product to a suitable power source as specified in the manual.

Operation:
Follow the operational instructions outlined in the manual to use the product effectively.

Maintenance:
Regularly maintain and clean the product as per the maintenance instructions provided.

Frequently Asked Questions (FAQ)

• Where can I find the serial number of the product?
  The serial number is located on the back of the product near the power input.

• What should I do if the product malfunctions?
  If the product malfunctions, refer to the troubleshooting section of the manual or contact customer support for assistance.

SPECIFICATION

Dimension

+ Motion sensor

Detecting Angle| 120°
Detecting Distance| 10m/33ft

INTRODUCTION

The solar Flood lights can automatically detect the changes in the brightness of the external environment. When the brightness is low enough, it will automati­cally switch from energy-saving mode to lighting mode without motion detection (Auto on at night/ Auto off at sunrise).

PACKAGE CONTENTS

• A 1 x Solar Flood lights
• B 2 x Gecko screw
• C 2 xScrews
• D 1 x User Manual
  *Note: If 2 Pack,content A-C will double

INSTALLATION

1. Take the light out from the box and charge it under direct sunlight for one day.

2. Drill 2 holes 42mm apart in both left and right directions, insert the included wall plugs into the holes.

3. Then twist 2PCS of screws into the wall plugs and leave a 5MM gap between the screw head and the wall.

4. Slide down the light to fit into the screw, finish the installation.

5. Press the switch to select your desired lighting mode, adjust the solar panel and the light head to best suit your needs.

6. If the sunshine is not abundant at the position you installed the light, you can slide out the solar panel from the main body, unfasten the hook and loop fastener at the back, take out the 3m long cord and install the the panel in another place with more exposure.

OPEARTION GUIDE

The default mode of the product is OFF mode. Press the back button to adjust modes when using the light.

3 LIGHTING MODES

• Working mode1
  The lamp flashing when 1st pressing the switch. Lamp turns into full light for human detection. 25 seconds after human lefl,lamps turn into half light until daytime.

• Working mode2
  The lamp double flashing when 2nd pressing the switch. Lamp turns into full light for human detection. 25 seconds after human left,lamps turn off until daytime.

• Working mode3
  The lamp triple flashing and turns off when 3rd pressing the switch.

WARM TIPS

1. lt is recommended to turn off the light and charge it under direct sunlight for 1-2 days before the first use. Make sure the product has enough power.
2. During the installation, please make sure the landscape light is installed under direct sunlight where there is no shade or eave to shelter the solar panel. Otherwise, the lighting time will be shorter.
3. Whether the solar landscaping spotlights can produce the best lighting effect or not depends on sunlight intensity, geographical location, weather conditions, seasons and other conditions.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>