DeepCool PX-P Series Native ATX 3.0 Platinum Power Supply User Manual

: June 17, 2024
: DEEPCOOL

Table of Contents

PX-P Series Native ATX 3.0 Platinum Power Supply
List of parts
Specfication sheet
Installation
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

PX-P Series Native ATX 3.0 Platinum Power Supply

PX-P Series
NATIVE ATX 3.0 PLATINUM POWER SUPPLY
PX1000P
PX1300P
PX1000P WH
PX1300P WH DeepCool PX-P Series Native ATX 3.0 Platinum Power Supply - list
of parts DeepCool
PX-P Series Native ATX 3.0 Platinum Power Supply - list of parts
1 DeepCool PX-P
Series Native ATX 3.0 Platinum Power Supply - list of parts
2

List of parts

A. Power supply unit
B. Main Power Connector (20+4)Pinx1
C. CPU(4+4)Pin x1
D. PCI-E(6+2)Pin x 1
E. OSATAx4
F. 4pin Peripheral x 4
G. 2VHPWR(16Pin) x 1
H. PCI-E8Pinx2 to 12VHPWR(16Pin) x 1
I. Mounting screws
J. AC power cord
K. Tester
L. Velcro

Specfication sheet

Model No.	PXAOOP-FC
AC Input	100-240Vac 13A-6.5A 50 60Hz

200-240Vac 6.5A 50-60Hz tRiAMT-43111*a
DC Output| +3.3V| +5V| +12V| -12V| +5VSB
Max Output Current| 22A| 22A| 83.3A| 0.3A| 3A
Max Combined Wattage| 120W| 999.6W| 3.6W| 15W
Total Output| 1000W
Type| ATX12V )8.0| Hold Up Time| ≥ 16ms
---|---|---|---
Product Dimensions| ASO x 160 x 86mm (W x L x H)| Efficiency| ≥ 92% Under Typical Load(50% Loading)
Fan Size| 120mm| Protection| DPP/OVP/SCP/OTP/OCP/UVP
Fan Beanng| FDB (Fluid Dynamic Bearing)| Operation Temperature| – 50t
Topology| interkeed PFC. FuFeridge & LLC + DC to CC| Erp Regulation| IP 2014
Capacitors| Full Japan Electrolytic Capacitors| MTBF| 00.000 Hours
Power Good Signal| 100-150ms| Warranty| Il2Years
Model No.| PXDOOP-FC
---|---
AC Input| 100-240Vac 15A-7.54 50 60Hz
200-240Vac 7.5A 50-60Hz
DC Output| +3.3V| +5V| +12V| -12V| +SVSB
Max Output Current| 25A| 25A| 108.3A| 0.3A| 3A
Max Combined Wattage| 130W| 1299.6W| 3.6W| 15W
Total Output| 1300W

Type	ATX12V V3.0	Hold Up Time	≥16ms
Product Dimensions	50 x 160 xf36mm (W x L x H)	Efficiency	≥ 92% Under

Installation

DeepCool PX-P Series Native ATX 3.0 Platinum Power Supply - list of parts
3 Ensure that the AC power cord of the power supply is not connected. Follow the case’s manual on installation of a power supply, and install the unit with the provided mounting screws. | The 24Pin motherboard cable has a detachable 4Pin connector, which allows support for both 24Pin and 20Pin power sockets on the motherboard. Connect the CPU(4+4)Pin cable to the motherboard, Connect the peripheral cable to the power supply socket of the hard disk and CD-ROM/DVD- ROM, DeepCool PX-P Series Native ATX 3.0 Platinum Power Supply - list of
parts 8 Connect the SATA cable to the power socket of the SATA SSD or hard disk, Connect the PCI-E(6+2)Pin cable to the power socket of the PCI-E graphics card (if necessary). If your Graphic Card uses 12VHPWR, please pnoritize using the 12VHPWR (12+4pin) cable configured in our Power Supply to connect to your Graphical Card. DeepCool PX-P Series Native ATX 3.0 Platinum Power Supply -
list of parts 11 Connect the AC power cord to the power supply and turn on the power by turning the switch to the “l” position,
For more information, please check our website at: www.deepcool.com

DeepCool USA Inc.
11650 Mission Park Drive Suite 108., Rancho Cucamonga, CA 91730
Beijing DeepCool Industries Co., Ltd.
Building 10, No. 9 Dijin Road, Haidian District, Beijing 100095, China
© 2023 Beijing DeepCool Industries Co., Ltd. All rights reserved.
“and other commercial identities are legitimate registered trademarks and commercial
identities of the trademarks owner and its affiliates in China and other countries or regions.
Pictures on this package are for reference only, please refer to the actual product.
www.deepcool.com

Documents / Resources

| DeepCool PX-P Series Native ATX 3.0 Platinum Power Supply [pdf] User Manual
PX1000P, PX-P Series Native ATX 3.0 Platinum Power Supply, Native ATX 3.0 Platinum Power Supply, 3.0 Platinum Power Supply, Platinum Power Supply, Power Supply, PX1300P
---|---