GLOBAL INDUSTRUAL 348204BKR Series Leaning Rail User Manual

GLOBAL INDUSTRUAL 348204BKR Series Leaning Rail

Product Specifications

• Models: 348204BKR, 348206BKR, 348208BKR, 348200BKL
• Dimensions:
  • 4ft 348204BKR: 48” x 12” x 34 1/4”
  • 6ft 348206BKR: 72” x 12” x 34 1/4”
  • 8ft 348208BKR: 96” x 12” x 34 1/4”
• Estimated Required Concrete: 11-50 lb Bags of Concrete Mix

Product Usage Instructions

1. Attach the Seats & Back to the legs using the specified hardware.
2. Attach the Inground footers to the bottom of the Legs.

Hardware Required

• Seats & Back: H1 x2, H3 x2
• Left Leg: H3 H2 x2, H2 x4, H3 x4
• Right Leg: H3 H1 x2, H2 x4, H3 x4
• Inground Footer: H2 x2, H3 x2

Tools Required

• 1/2” Wrench
• 1/2” Socket Wrench
• Level
• Tape Measure

Frequently Asked Questions (FAQ)

Q: How many bags of concrete mix are required for installation?

A: The estimated required concrete is 11-50 lb bags of concrete mix.

Q: What are the dimensions of each model?

A: The dimensions for each model are as follows:

• 4ft 348204BKR: 48” x 12” x 34 1/4”
• 6ft 348206BKR: 72” x 12” x 34 1/4”
• 8ft 348208BKR: 96” x 12” x 34 1/4”

Q: What hardware is required for assembly?

A: The specified hardware includes:

• 5/16” x 1” Outer Hex Anti-rust Screw (4)
• 5/16” Kep Nut (12)
• 5/16” Washer (16)

PARTS

Hardware

Tools Required

SAFETY WARNINGS & EQUIPMENT INSPECTION

• Owners and installers please note these safety warnings and make use of this checklist regularly.
• Follow installation instructions when erecting equipment.
• Ground surfaces around equipment should be restored as needed. Concrete footings should never be exposed. Surface depth should comply with ASTM and CPSC specifications.
• Check for and repair damage caused by wear or vandalism, a major factor in injury-causing situations.
• All protruding bolts should be covered or cut off and finished smooth. Sharp edges on pipes should be capped or removed.
• Check for bent, broken, or severely worn pipes, and replace them.
• All equipment should be free of rust and repainted whenever necessary to deter rusting.
• We provide our customers with layout sheets and installation instructions.
• Please keep on file the specifications sheet that contains the listing of every part used.
• Never add components not intended for use with this product.
• Regular maintenance is necessary in this and all park and recreational equipment to ensure the safety of the user.
• Note: Proper maintenance of equipment requires regular tightening of all bolts, nuts, and set screws.
• Note: Regular checking of all parts, castings, etc. should be made. If a part is broken or worn, it should be replaced immediately.
• Check to be sure all fittings are tight and that bars and pipes do not move.

Dimension

4′ / 6′ / 8′ Leaning Rail Black

| 4ft 348204BKR| 6ft 348206BKR| 8ft 348208BKR
---|---|---|---
Length| 48”| 72”| 96”
Width| 12”| 12”| 12”
Height| 34 1/4”| 34 1/4”| 34 1/4”

INSTALLATION

• Attach the Seats & Back to the legs using specified hardware.
• Then attach the Inground footers to the bottom of the Legs.

Customer Service US: 1-800-645-2986

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>