OliverIQ 10022002 Gen 1 Home Automation Controller User Guide

OliverIQ 10022002 Gen 1 Home Automation Controller User Guide

Home Automation Controller
OliverIQ Home Automation Controller (Gen 1)
User’s Guide

Safety Information

Read and understand all instructions before using this product. If damage is caused  by failure to follow the instructions, the warranty does not apply.

Warning

To reduce the risk of electric shock, DO NOT remove the cover (or back).

DO NOT attempt to repair the product, this could lead to the risk of injury, damage  to the product .

To reduce the risk of fire or electric shock, keep this product away from exposed  direct sunlight, naked flames or heat, large amounts of moisture, dust, and sand. FCC Note (for U.S.A)

This equipment has been tested and found to comply with the limits for a Class B  digital device, pursuant to Part 15 of the FCC rules. These limits are designed to  provide reasonable protection against harmful interference in a residential  installation. This equipment generates, uses and can radiate radio frequency energy  and, if not installed and used in accordance with the instructions, may cause  harmful interference to radio or television reception, which can be determined by  turning the equipment off and on.

The user is encouraged to try to correct the interference by one or more of the  following measures.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
• This class B digital product meets all requirements of the Canadian Interference – Causing Equipment Regulations.

Precautions

Important Safety Instructions

Read these operating instructions carefully before using the unit. Follow all the  safety instructions listed below.

Keep these operating instructions handy for future reference.

1.2.1 Read these instructions.

1.2.2 Keep these instructions.

1.2.3 Heed all warnings.

1.2.4 Follow all instructions.

1.2.5 DO NOT use this apparatus near water.

1.2.6 DO NOT clean with any chemical detergent. Clean only with a dry cloth.

1.2.7 DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.

1.2.8 DO NOT install near any heat sources such as radiators, heat registers, stoves,  or other apparatus that produce heat.

1.2.9 Protect the power cord from being walked on or pinched particularly at plugs,  convenience receptacles, and the point where it exits the apparatus.

1.2.10 Only use attachments/accessories specified by the manufacturer.

1.2.11 Use only with the cart, stand, tripod, bracket, or table specified by the  manufacturer, or sold with the apparatus. When a cart is used , use caution when  moving the cart/apparatus combination to avoid injury from tip- over.

1.2.12 Unplug this apparatus during lightning storms or when unused for long period of time.

1.2.13 Refer all servicing to qualified service personnel. Servicing is required when  the apparatus has been damaged in any way, such as when the power-supply cord or  plug is damaged, liquid has been spilled or objects have fallen into the apparatus,  the apparatus has been exposed to rain or moisture, does not operate normally, or  has been dropped.

Handling Cautions

1.3.1 DO NOT expose this apparatus to dripping or splashing. Do not put objects  filled with liquids, such as vases on the apparatus.

1.3.2 To turn this apparatus off completely, you must pull the power plug out of the  wall socket. Consequently, the power plug must be easily and readily accessible at  all times.

1.3.3 DO NOT plug multiple electric devices into the same wall socket. Overloading a socket can cause it to overheat, resulting in a fire.

1.3.4 Before connecting other components to this player, be sure to turn them off.

1.3.5 If the product makes an abnormal noise or produces a burning smell or smoke,  turn off the power switch immediately and disconnect the power plug from the wall  outlet. Then, contact the nearest customer service center for technical assistance. Do  not use the product. Using the product as it is may cause a fire or an electric shock.

Introduction

Package Contents

Home Automation Controller

User’s Guide

USB-C power Cable

Power Adapter, Input: AC100 ~ 240V, 50/60Hz, Output: 5V/3A

Product Features

Quad-core Cortex-A7 up to 1.2GHz CPU, Mali-400MP2 GPU, DDR is 1GB，EMMC FLASH is  8GB

Debian 11 OS

1*USB-C for Power Supply

Support 2.4G/5.8G duan band WiFi and Bluetooth 4.0

1*10/100M LAN interface

1*Zigbee module (built-in)

1*Zwave module (built-in)

Panel Introduction

2.3.1 BOARD FRONT VIEW

Repairs

If you contact us to repair your Home Automation Controller, an administration fee  may be charged if either:

An engineer is called out to your home at your request and there is no defect in the  product.

You bring the unit to a repair center and there is no defect in the product. We will provide you with the amount of the administration fee before we make a home visit or begin any work on your player.

We recommend you read this manual throughly, search for a solution on line at www.geniatech.com, or contact Geniatech Customer Care before seeking to repair  your player.

Specification

CPU Rockchip 3128 Quad-core Cortex-A7 up to 1.2GHz

GPU Mali-400MP2 GPU

RAM 1GB

ROM 8GB

OS OS Debian 11

Power Type-C

LAN Ethernet 10/100M

Wi-Fi 2.4G / 5.8G dual band WiFi

BT BLE 4.2

RF module Zigbee, Zwave

Video Encoder Supports MP3, AAC, WMA, RM, FLAC, Ogg Vorbis ,Opus,SRS Truvolume, Support video encoder for H.264 UP to HP@level4.1, MVC  and VP8

Support error resilience based on constrained intra prediction and slices Input data format:

YCbCr 4:2:0 planar，

YCbCr 4:2:0 semi-planar

YCbYCr 4:2:2

CbYCrY 4:2:2 interleaved

RGB444 and BGR444

RGB555 and BGR555

RGB565 and BGR565

RGB888 and BRG888

RGB101010 and BRG101010

Image size is from 96×96 to 1920×1088(Full HD)

Video  Decoder Real-time video decoder of MPEG-1, MPEG-2, MPEG-4,H.263, H.264, H.265,VC-1, VP8, MVC

Output data format is YUV420 semi-planar, and YUV400(monochrome) is also supported for H.264

H.265 up to MP Level 4.1 High Tier : 1080P@60fps

H.264 up to HP level 4.21080p@60fps

MPEG-4 up to ASP level 51080p@60fps

MPEG-2 up to MP1080p@60fps

MPEG-1 up to MP1080p@60fps H.263576p@60fps

VC-1 up to AP level 31080p@30fps VP81080p@60fps

MVC1080p@60fps

Size 85 mm 56 mm 16 mm

Net Weight 45g

ISED Statement

** ‐ English: This device complies with Industry Canada license ‐ exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES ‐ 3 (B)/NMB ‐ 3(B).**

This radio transmitter has been approved by Industry Canada to operate with the antenna types listed with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicatedfor that type, are strictly prohibited for use with this device.

ISED Radiation Exposure Statement

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

the device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems

FCC Warning

This device complies with part 15 of the FCC rules. Operation is subject to the  following two conditions: (1) this device may not cause harmful interference, and  (2) this device must accept any interference received, including interference that  may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for  compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a  Class B digital device, pursuant to part 15 of the FCC Rules. These limits are  designed to provide reasonable protection against harmful interference in a  residential installation. This equipment generates uses and can radiate radio  frequency energy and, if not installed and used in accordance with the  instructions, may cause harmful interference to radio communications. However,  there is no guarantee that interference will not occur in a particular installation.  If this equipment does cause harmful interference to radio or television reception,  which can be determined by turning the equipment off and on, the user is  encouraged to try to correct the interference by one or more of the following  measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to  which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Documents / Resources

| OliverIQ 10022002 Gen 1 Home Automation Controller [pdf] User Guide
10022002, 10022002 Gen 1 Home Automation Controller, Gen 1 Home Automation Controller, Home Automation Controller, Automation Controller, Controller
---|---

References

• Industrial Embedded Computers & Edge AI Solutions - Geniatech
• Industrial Embedded Computers & Edge AI Solutions - Geniatech

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>