ABBA CDPA57 Aluminum Path Light Usa Distributor Outdoor Lighting Installation Guide

ABBA CDPA57 Aluminum Path Light Usa Distributor Outdoor Lighting

Product Information

Specifications

• Model: CDPA57
• Rated Voltage: 12V AC/DC

Product Usage Instructions

Important Safety Instructions
WARNING: LIGHTEN LAMP IS HOT! To reduce the risk of fire or injury to persons:

• Always follow local codes and ordinances.
• Avoid installation within 10 feet of a pool, spa, or fountain.

Installation Instructions
To ensure optimal performance and safety, use our fixtures ONLY with a low- voltage landscape transformer that reduces voltage from 120V to 12V for outdoor use.

1. Before installation, deactivate power for safety.
2. Remove the screws on the fixture using a screwdriver.
3. Attach the top fixture with the bottom fixture using screws.
4. Use WN12 waterproof wire nuts (sold separately) for connectivity.
5. Strip approximately 3/4 inch (1.9 cm) of insulation from wire ends.
6. Align and connect wire ends neatly without stray strands.
7. Mount securely by inserting the spike into the ground vertically.
8. Turn on power after installation for enhanced lighting experience.

Note: Follow local electrical codes and consult an electrician if uncertain or uncomfortable with electrical tasks. Safety is a top priority with electrical connections.

Additional Recommendations:

• Bury the main cable from the transformer underground for safety.
• Avoid exceeding maximum wattage on fixtures to prevent damage or hazards.

Frequently Asked Questions (FAQ)

• Q: What is the warranty on the product?
  A: We offer a 2-year warranty on our product. Keep the proof of purchase for any warranty claims. The warranty will be void if there is damage due to improper usage or modification to the fixture.

• Q: Can I install the fixture myself?
  A: While you can install the fixture following our instructions, it’s recommended to consult a qualified electrician if you are uncertain or uncomfortable with electrical tasks for safety reasons.

Congratulations on your purchase of this high-quality product! We want to ensure that you have the best possible experience with it, so we kindly ask that you take a moment to carefully read and follow all instructions before assembly, installation, and use. By doing so, you’ll not only guarantee correct function and safety but also optimize the full potential of this exceptional product. Thank you for choosing us as your trusted provider of top-notch products – we truly appreciate your business!

IMPORTANT SAFETY INSTRUCTIONS

WARNING: TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS:

• Please exercise caution when using the lamp, as it tends to HEAT up rapidly. We recommend taking necessary safety measures to ensure optimal usage.
• For your safety, please refrain from touching the HOT lens, guard, or enclosure. We recommend waiting for the product to cool down before handling it.
• To prevent any fire hazards, please ensure that the lamp is kept away from materials that may easily catch fire. We appreciate your cooperation in maintaining a safe and secure environment.
• For safety reasons, we recommend that only a qualified professional install this electrical product.
• Before attempting to install this unit, ensure all power connections are off for your safety.

WARRANTY

• We stand behind the quality of our product and offer a 2-year warranty. Kindly ensure that you keep the proof of purchase as it will be required for any warranty claims.
• The warranty will be void if there is any damage due to improper usage or modification to the fixture.
• Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the warranty.

CAUTION: Fixture(s) must be installed by all local codes and ordinances. Do not instal within 10 feet of a pool, spa or fountain.

INSTALLATION INSTRUCTION

To ensure optimal performance and safety, it is important to use our fixtures ONLY with a low-voltage landscape transformer. This transformer reduces the voltage from 120V to 12V, making it safe and suitable for outdoor use.
When installing the fixture(s), please follow these instructions carefully:

1. Before installation, it is imperative to verify that the power is deactivated to guarantee your safety.

2. Remove the screws on the fixture using a screwdriver.

3. Attach the top fixture with the bottom fixture using the screws.

4. To establish a dependable and enduring electrical connection between fixture wires and the main line in outdoor or underground installations, it is essential to select a suitable main cable connector designed for direct burial. This connector should be chosen based on its ability to withstand environmental conditions, resist moisture and corrosion, and provide robust insulation. By adhering to industry standards and best practices, including proper wire stripping and secure fastening techniques, a reliable connection can be established, ensuring optimal performance, safety, and longevity of the system.
   We recommend using WN12 waterproof wire nuts (sold separately) for optimal connectivity.

5. Strip the insulation: Carefully strip approximately 3/4 inch (1.9 cm) of insulation from the ends of the two wires you wish to connect. Ensure that the bare metal ends are clean and free from any frayed strands.

6. Align the wires: Hold the stripped ends of the two wires together, aligning them neatly and ensuring that no stray strands are crossing over.
   Insert the wires: Insert the aligned ends of the wires into the wire nut, ensuring that they go all the way in. The bare ends should be completely covered by the wire nut. Twist the wire nut: Firmly twist the wire nut clockwise onto the wires, ensuring a secure connection. Continue twisting until the wire nut is tight and snug. Test the connection: Gently tug on each wire to ensure they are securely held by the wire nut. The connection should be firm and not come loose. Inspect the connection: Examine the wire nut connection to ensure there are no exposed wires or loose strands. If any issues are detected, remove the wire nut and repeat the process from step 5 .
   Note: It’s always recommended to follow local electrical codes and regulations when performing any electrical work. If you’re uncertain or uncomfortable with electrical tasks, it’s advisable to consult a qualified electrician. Safety should always be a top priority when working with electrical connections.

7. For a secure and stable mounting, dig a small hole and insert the spike into the ground, ensuring it is vertical and firm.

8. Once the fixture(s) are securely installed, turn on the power and enjoy the enhanced lighting experience!

We strongly recommend that the main cable from the transformer be buried underground for safety reasons. Additionally, please be sure to avoid exceeding the maximum wattage on the fixture(s) to prevent any damage or hazards.

www.ABBALightingUSA.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>