Two notes OPUS Power Amp Tube Stage Modeling User Guide
- June 1, 2024
- Two Notes
Table of Contents
Two notes OPUS Power Amp Tube Stage Modeling
The Highlights
Featuring GENOME’s Pre- & Power-amp Tube-Stage Modeling™ (‘TSM™), our class- leading DynlR™ Engine, MIDI integration and a future-proofed USB-C specification, OPUS has been engineered to empower you with apexlevel tone in a go-anywhere footprint.
- TSM™ Pre- and Power-amp simulation
- On-board DynlR™ Engine for class-leading cabinet simulation
- Pro-grade suite of essential DSP-powered processors and FX
- Pre-loaded with the OPUS-Series DynlR Cabinet Collection featuring 32 primo captures On-demand access to 600+ DynlRs
- Wireless and USB integration with Torpedo Remote
- GENOME OPUS Edition included
OPUS, it’s more than our masterpiece: it’s a back-line in your gig-bag and a macrocosm of next-level tonal excellence.
Download OPUS User Guide opus.two-notes.com/manual
Register OPUS via Torpedo Remote remote.two-notes.com
Warranty Information Two notes Support News and Products
opus.two-notes.com/warranty
support.two-notes.com
two-notes.com
Inputs & Outputs
-
Connect your Pedalboard, Guitar, Amp output or Line Level source here
WARNING
When using OPUS with an amplifier via the INST / LINE IN /FROM AMP input, ALWAYS ensure a suitable load box* or cabinet is connected to the TO SPEAKER output -
Connect your load box* or cabinet here when plugging your amp into the INST / LINE IN / FROM AMP (1) Input
-
Configure OPUS Input Level corresponding to the source connected to the INST / LINE IN / FROM AMP (1) Input
-
Take command of all of OPUS’ editable parameters via a USB (or wireless) connection to Torpedo Remote
-
Power Input – 12V DC (Power Supply Included)
-
A Memory card reader for static IR loading and storage
-
B MIDI Input*
-
C Headphone Output
-
D ⅛-inch stereo Aux Input
-
E Ground Lift switch
-
F Balanced XLR output
-
G Balanced Jack output (TRS)
-
Replace your cabinet with a load box and play your tube amp silently through OPUS. For optimal performance, we recommend a reactive load box such as the Torpedo Captor. Learn more at captor.two-notes.com + Learn more about MIDI settings at opus.two-notes.com/midi
Connectivity For Any Scenario
OPUS, Standalone
Use OPUS as a standalone tone-shaping solution, harnessing the power of the
built-in TSM™ Pre- & Power-amp emulation, DynIRT™ Engine, Post FX and MIDI
control.
Level-Up Your Board!
Pedal fanatics, make OPUS the beating heart of your rig. Its stellar front-
and rear-loading capability, in tandem with your pre- and post- amp pedal
collection, delivers the ultimate ‘go- anywhere’ fly-rig.
DI Your Amp
Place OPUS between your amp & speaker rig, engage Two notes proprietary DynIR™
cabinet technology and deliver flawless tone to a DAW or FOH.
Dual Mono Routing
Send a fully-processed signal to FOH and a TSM™ Preamp signal to your amp’s FX
return, or record a dry Di and DSP processed signal using the LINE and Di
outputs simultaniously.
WARNING
When configuring OPUS with an amplifier via the INST / LINE IN / FROM AMP
input, ALWAYS ensure a suitable load box or cabinet is connected to the TO
SPEAKER output.
OPUS Controls
The dual rotary encoders on OPUS are continuous and both include push
functionality. OPUS features two primary modes that dictate the behaviour of
the rotary encoders – PERFORM Mode and MENU Mode.
At startup, OPUS defaults to PERFORM Mode.
In PERFORM Mode
- The LEFT encoder lets you scroll through presets while the RIGHT encoder sets OPUS’ output volume
- A short press of any encoder switches the unit into MENU Mode
- A long press on the LEFT encoder provides access to Preset naming and save options
- A long press on the RIGHT encoder activates OPUS’ built-in Tuner
In MENU Mode
- The LEFT encoder can be used to navigate through OPUS’ menu parameters while the RIGHT encoder lets you edit the selected parameter value
- A short press on the LEFT encoder lets you exit MENU Mode and switch back to PERFORM Mode
- A short press on the RIGHT encoder provides access to any sub-menus tied to the Main Menu options
Please note, GLOBAL parameters are not tied to a specific Preset and are saved
directly upon instantiation; these are subsequently effective across all OPUS
Presets.
Parameters outside of the GLOBAL parameter menu are saved at a Preset Level.
Torpedo Remote
For deft ease-of-use, Torpedo Remote (iOS/Android/MacOS/Windows) serves as the
nexus of your tone shaping experience; simply hookup to your Phone, Tablet or
Desktop and experience liberated 1:1 integration with every editable parameter
in the OPUS architecture. Get the download link on Page 2.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>