PEIKO PKO-BTM223 Translation Earphones User Guide
- June 1, 2024
- PEIKO
Table of Contents
PEIKO PKO-BTM223 Translation Earphones
Product Information
Specifications
- Compliance: Part 15 of FCC Rules
- Radiation Exposure Limits: FCC approved for uncontrolled environments
- Minimum Distance: 0cm between radiator and body
Frequently Asked Questions
- Q: Can I modify the device without voiding the warranty?
- A: Any changes or modifications not approved by the manufacturer may void the warranty.
- Q: How far should I keep the device from my body during operation?
- A: The recommended minimum distance between the radiator and your body is 0cm as per FCC guidelines.
Introduction
WELCOME
Thank you for choosing peiko’s smart Bluetooth headset. This product is a powerful smart headset. It not only has excellent headphone functions, but also has advanced Ai intelligent translation capabilities. It will help you communicate better with foreign languages.
- The unit comes with 3 sizes of EarGels for an optimal user experience. Try each of the Ear Gel sizes to pick the one that fits best for you.
- The best fit should feel tight and secure in your ear without causing discomfort.
EARPHONE CHARGING
It is recommended to fully charge the battery before first-time use. It usually takes about 2 hours for the headset to be fully charged. Plug the included USB cable into charging port of the charging case and connect the other end of the cable to the USB port or USB wall charger.
During charging, LED light in the charging case will display breathing white light. After charging, LED light will shift to constant white light. Charging the charging box and headphones will occur simultaneously. During the charging process, the light on the earphone will be red, and the red light will be extinguished when the earphone is fully charged.
EARPHONE SPECIFICATIONS
- Earphone:
- Bluetooth Version: 5.0
- Transmission Range: 33 Feet (10m)
- Battery: 50mAh LiPolymer DC 5V, Approx 2 Hour
- Charge Time: 1h
- Use Time: Up to 8-10Hours/ 120 Hours Standby
- Charging Case:
- Battery: 250mAh LiPolymer DC 5V, Approx 2 Hour
- Charge Time:
- Use Time: Charge the headset 3 times
EARPHONE OVERVIEW
PRODUCT FUNCTIONS
EARPHONE INDICATOR LIGHTS
- No Light / Unit is Off
- Fast Flash White / Unit is On and BT Unit is On and in Pairing Mode
- Slow Flash White /Connected
- Solid Red / Unit is Charging
- Flashing Red / Low Battery
CHARGING CASE INDICATOR LIGHTS
- No Light / No Power
- Green Light / 75% Of The Battery
- Yellow Light / 50% Of The Battery
- Red Light ………………….
CALL HANDLING FUNCTIONS
- Answer/End Call / Click the Power Button
- Reject Call / Long Press Power Button
- Put Call on Hold to Answer Incoming Call / Click Power Button
MUSIC LISTENING FUNCTIONS
- Play/Stop / Click the Power Button
- Next Song / Double click on the power button
- Start siri/ google now / Long Press Power Button
CONNECTING BLUETOOTH EARPHONE
After turning on the Bluetooth headset (the indicator light flashes white rapidly), select “BTM-223” from the list of Bluetooth devices on your phone, do not select “BTM-223-APP” Once the connection is established, a confirmation sound will play and the indicator will flash slowly.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution
- Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
MODEL: PKO-BTM223
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF warning statement:
- The device has been evaluated to meet general RF exposure requirement.
- The device can be used in portable exposure condition without restriction.