Jiose HM26 Label Maker Instruction Manual
- June 1, 2024
- Jiose
Table of Contents
Jiose HM26 Label Maker
Product Introduction
Appearance and Components
（a. Left View）
（b. Right View）
（c. Front View）
Packing List
Quick Start Guide
Printer
The items in the package is actually based on the order.
LED Indicator Status
| White LED Basic State | Quick Flash : Firmware updating |
|---|
Slow Flash: Charging
ON: Printer is ready/Bluetooth connected/Bluetooth disconnected/Bluetooth
lost
White LED Abnormal State| Slow Flash with Beeps : Low power/Paper
end/Cover opened/Printer head is overheated
( Tips: If the printer keeps beeping at error status, pressing the power button once can stop beeping. User should better fix the error state with appropriate method, such as charging, loading paper, closing the cover, etc.)
ON/OFF
Hold down the power button for 3 seconds to turn on/off the printer.
Paper Loading
-
Put your hands on both sides of the printer to open it towards the direction shown below.
-
Load the paper as shown below, and make sure the thermosensitive layer is facing up.
-
Lift the lever up and adjust the paper guide according to the paper width. Then press the lever down to lock the paper guide.
-
Pull some extra paper to ensure the paper can be held by the roller, then close the cover.
Battery Charging
If the battery power is low, the white LED indicator will flash slowly.
Please charge the device with the exclusive USB cable in time to avoid automatic power off while printing.
Note : The printer can be charged via computer USB port or AC adapter. Please note that the AC adapter is not supplied.
App Download
Please search and download “Here Label” from App Store or Google Play. (Or scan the QR Code to download the app.)
“HereLabel” APP
Connecting and Printing
- Connect to Printer
Turn on Bluetooth on your smartphone and turn on the printer. Then open the App, and click “Device Connection” (or shown as “Not Connected” in the up- right corner), an “HM26” should show up on the printer list, select it to connect.
-
Edit a Label
Click “P_Template” to browser label templates, select a template then click open to edit from the template; or click “New” to create and edit from a blank page. -
Print
Edit the label as needed, and then click the print button after editing.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and {2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’ s RF Exposure Guidelines, this equipment should be installed and operated with minimum distance between 20cm the radiator your
body : Use only the supplied antenna.
FCC ID: 2AUTE-2DT23J
Specifications
| Model: | HM26 |
|---|---|
| Resolution: | 203dpi |
| Connection: | Bluetooth, USB |
| Product Weight: | 0.62 lbs / 0.28 kg |
| Product Dimentions: | 8580 80mm(LWH) |
| Label Type: | Direct Thermal Labels |
| Label Width: | 2″（50mm） |
| Max. Roll Diameter: | Φ 2″（50mm） |
| Input Power: | 5V 1A |
Support and Warranty
Your Jiose printer is covered by a one-year warranty from the date of purchase. Please feel free to contact our customer service team for any questions or issues with our product. We are always ready to assist you to the best of our abilities.
(Warranty/After Sales/Technical Support)
-
Email:
support@jioseprinter.com -
Phone Call:
+1 281-236-7202
+1 281-236-8167 -
Official Site:
www.jioseprinter.com -
Live-chat:
www.jioseprinter.com
Service Hours: Weekdays from 9:00 am to 18:00 pm PST.
Scan QR Code above to CONTACT Jiose TECH SUPPORT directly online or email to support@jioseprinter.com
Manufacturer : Xiamen Hanin Electronic Technology Co., Ltd.
Address : No.96, Rongyuan Road, Tong’an District, Xiamen, China 361100
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>