BULUXE DJ17T7E860 4 Light LED Linear Kitchen Island Lighting Installation Guide
- June 1, 2024
- BULUXE
Table of Contents
BULUXE DJ17T7E860 4 Light LED Linear Kitchen Island Lighting
Product Information
Specifications
- Self-tapping screws: M4*30mm
- Glue sleeve: Lampshade 100mm*3
Product Usage Instructions
- Remove the pegboard from the chassis.
- Fix the pegboard to the ceiling using the self-tapping screws provided. Before fixing, ensure the light works normally.
- Insert the power cord into the terminal, ensuring the red wire is connected to ‘L’ and the blue wire is connected to ‘N’.
- Screw in the chassis securely following the provided instructions.
- Connect the light source as shown in the picture.
- Screw the lampshade onto the light source.
Instructions for using the remote control
- Follow the instructions provided in the remote control user manual for proper usage.
FAQ
- Q: What should I do if the light does not work after installation?
- A: Check the power connection, ensure the wires are correctly connected, and test with a different power source if needed.
Installation Guide
Parts List
- self-tapping screws and glue sleeve:
- M430mm,lampshade100mm3
Installation Instructions
- Step 1: Remove the pegboard from the chassis and fix it to the ceiling with self-tapping screws.
- Note: you can test the light normal work before doing this step.
- Step 2: As shown in the picture, the power cord into the terminal. (red wire for L, blue wire for N)
- Step 3: Screw in the chassis as shown.
- Step 4: As shown in the picture, connect the light source and screw the lampshade.
Completion
Remote Control
12 Key Remote Control Manual is successful
Pairing with lights
- Press and hold the “SETUP” button on the remote control for 3 seconds, and the light flashes 3 times. Pairing
Delete pairing.
- Press and hold the “on” button on the remote control for 3 seconds, and the light will flash 3 times to delete pairing.
Instructions for using the remote control
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>