NATIONAL INSTRUMENTS SCXI-1349 SCXI Signal Conditioning eXtensions Instruction Manual

: June 1, 2024
: NATIONAL INSTRUMENTS

Table of Contents

NATIONAL INSTRUMENTS SCXI-1349 SCXI Signal Conditioning eXtensions
Product Information
Product Usage Instructions
FAQs
Support and Contact Information
Environmental and Recycling Information
Trademark Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

NATIONAL INSTRUMENTS SCXI-1349 SCXI Signal Conditioning eXtensions

Product Information

Specifications

Product Name: SCXI-1349 Signal Conditioning eXtensions for Instrumentation
Mainframe Compatibility: SCXI-1140
Power Input: ~120Vac
Address Switches: 6-position switch
Compatibility: SCXI-1520, SCXI-1530, SCXI-1531, SCXI-1540, SCXI-1140, SCXI-1521/B, SCXI-1112, and more (refer to manual for full list)

Category	Detail
Security	Compliant with IEC 61010-1, EN 61010-1, UL 61010-1, CSA 61010-1
Electromagnetic Compatibility	Compliant with EN 61326 (IEC 61326): Class A

emissions, Basic immunity
EN 55011 (CISPR 11): Group 1, Class A emissions
AS/NZS CISPR 11: Group 1, Class A emissions
FCC 47 CFR Part 15B: Class A emissions
ICES-001: Class A emissions
CE Compliance| Meets the main conditions of applicable European Directives: 2006/95/EC, 2004/108/EC
Product Certification Online| Refer to the product’s Declaration of Conformity (DoC) for additional information on product certifications.
Environmental Management| National Instruments is committed to designing and manufacturing products that consider environmental impact.

Product Usage Instructions

1. Power Connection

Connect the power cord to the designated power input (~120Vac).

2. Address Configuration

Set the address using the 6-position switch located on the device according to your system requirements.

3. Module Installation

Install the SCXI modules in the appropriate slots of the SCXI-1140 mainframe following the guidelines provided in the user manual.

4. Additional Connections

For additional connections like USB modules or accessories, refer to the specific installation instructions provided in the manual.

FAQs

What is the power input requirement for the SCXI-1349?

The SCXI-1349 requires an input power of ~120Vac.

How many address positions are available on the SCXI-1349?

The SCXI-1349 features a 6-position switch for address configuration.

Which mainframe is compatible with the SCXI-1349?

The SCXI-1349 is compatible with the SCXI-1140 mainframe.

What should I do if my SCXI chassis is not powering on?

Ensure that the SCXI chassis is correctly connected to power and that the power switch is turned on. If the problem persists, refer to the troubleshooting steps in the guide or contact National Instruments support.

How can I confirm that my SCXI chassis and modules have been recognized by the system?

Open the Measurement & Automation Explorer (MAX) software and expand the Devices and Interfaces section to check for the presence of the SCXI chassis and modules. If they do not appear, refresh MAX or refer to the troubleshooting section.

How do I install an SCXI module into the chassis?

Discharge static electricity before handling the SCXI module. Align the module with the chassis guides and slide it in until you feel resistance. Then, use the insertion/ejection handle to secure the module in place.

Where can I find additional support for my SCXI system?

For additional support, visit NI Support or refer to the SCXI Quick Start Guide for detailed instructions and troubleshooting tips.

What are the environmental considerations for National Instruments products?

National Instruments is dedicated to environmental management and recognizes the benefits of eliminating hazardous substances from its products. For more information, visit Engineering a Healthy Planet – NI.

Support and Contact Information

For additional support, visit the NI Support page. For information on support supplemental to Signal Conditioning products, refer to NI-DAQ™mx Download – NI.

The global technical support team is located at 11500 North Mopac Expressway, Austin, Texas, 78759-3504, United States. National Instruments also has offices worldwide to answer questions and provide assistance.

For product certifications, visit NI Trademarks and Logo Guidelines – NI for a full listing and NI Zone for support.

Environmental and Recycling Information

At the end of their life cycle, all products must be sent to a DEEE recycling center. For additional information on National Instruments and compliance with the WEEE Directive 2002/96/EC on waste electrical and electronic equipment, visit Product Take-Back Program and Recycling – NI.

For information about China RoHS compliance, go to ni.com/environment/rohs_china.

Trademark Information

CVI, LabVIEW, National Instruments, NI, ni.com, the logo of National Instruments, and the logo of Eagle are trademarks of National Instruments. Microsoft Corporation’s LabWindows is used under license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. All product and company names mentioned herein are trademarks of their respective owners. For a full listing of NI patents protecting NI technology, please refer to the NI Patent Notice at ni.com/patents.

For export compliance information, visit Export Compliance Information at ni.com/legal/export- compliance to consult the policy of National Instruments on conformity to international trade regulations and to find out how to obtain the ECCN (Export Control Classification Number) and HTS (Harmonized Tariff Schedule) numbers relevant to your product.

Document Number: 373236M

Publication Date: June 2011