Hisense ES-A22510U-1 Smart TV User Manual

USER MANUAL

Read the manual carefully and ensure you have fully understood its contents before operating this device for the first time.

Figures and illustrations in this manual are provided for reference only and may differ from actual product appearance.
Parts of the software function changes with the system upgrade.

Find what you want

This TV is equipped with a user manual and embedded E-Manual (Settings

Support > E-Manual).

E-Manual support functions

Accessories List

The following accessories are included with TV:

NOTE

• The accessories may be different from the list above due to different models, countries/regions. Please refer to the actual accessory bag.

Important Notice
Paragraphs beginning with the symbol , indicate important instructions, tips or conditions for the following settings.
A For your own safety and the optimal performance of your TV, ensure to AH read the safety instructions before performing any installation.
Compatibility with 3rd party products, software and services are not guaranteed.
We cannot be held liable for any damage or loss suffered whilst operating, using or connecting to incompatible devices or apps.

The recording and playback of content on this or any other device may require permission from the owner of the copyright or other such rights in that content. It is your responsibility to ensure that your use of this or any other device complies with applicable  copyright legislation in your country. Please refer to that legislation for more information on the relevant laws and regulations involved or contact the owner of the rights of the content you wish to record or playback.
Read these instructions
Follow all instructions
Heed all warnings
Keep these instructions
All rights reserved.

Safety Instructions
To ensure safe and correct use of this product, always comply with the following precautions to avoid dangerous situations and damage to your unit:

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral is  Ulangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

AC voltage: This symbol indicates that the rated voltage marked with the symbol is AC voltage.
****Cass II product : This symbol indicates that it does not require a safety connection of protectve earthing (ground).

The intended use and ambient conditions for this TV
This TV is intended for the rendering of video and audio signals, on a table- top or wall­ mounted, in a home or office environment. It must not be used in rooms with a high level of humidity or dust  concentration. The warranty is only valid if used as intended by the manufacturer.

WARNING
High humidity and dust concentration may lead to current leaks in the device. To reduce the risk of fire or electrical shock:
– Do not expose this unit to rain, moisture, dripping or splashing water, and do not place objects filled with liquids, such as vases, cups, etc. on or over the unit.
– Do not touch the TV with wet hands.
– Do not expose to direct air-conditioning and keep candles or other naked flames away from the TV at all times.
If the TV is moved from a cold environment to a hot environment, leave it switched off for at least an hour to avoid condensation. If used outside, make sure it is protected from moisture.
If you notice anything unusual, immediately remove the power plug.
In case of fire, use preferably a CO, gas or powder fire extinguisher. If such extinguishers are not accessible, try to isolate the electrical supply before using a water fire extinguisher.

WARNING
Stability Hazard
A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
– ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of the television set.
– ALWAYS use furniture that can safely support the television set.
– ALWAYS ensure the television set is not overhanging the edge of the supporting furniture.
– ALWAYS educate children about the dangers of climbing on furniture to reach the television set or its controls.
– ALWAYS route cords and cables connected to your television so they cannot be tripped over, pulled or grabbed.
– NEVER place a television set in an unstable location.
– NEVER place the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and television set to a suitable support.
– NEVER place the television set on cloth or other materials that may be located between the television set and supporting furniture.
– NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the television or furniture on which the television is placed.
If your existing television set is being retained and relocated, the same considerations as above should be applied.

Moving/Transportation
Before moving this TV, disconnect all cables and move in the vertical position only. Grasp the device on the upper and lower edges of the frame.
Do not press or put stress on the front panel of the TV. It may take two or more people to carry larger TVs.
If you have to briefly lay down the TV, place the unit with its entire front surface lying flat on soft material.
The LED screen is made of glass and can break if is not handled properly. Always wear rubber gloves to carry the unit. If the LED screen is damaged, liquid crystal might leak out. In case of skin contact, immediately rinse thoroughly with water.

Power Supply
Incorrect voltages can damage the TV. Only connect this unit to a power supply with the correct voltage and frequency noted on the type plate, using the supplied power cable.
The power plug must be easily accessible so that the device can be disconnected at all time. The unit is live, even if in standby mode, as long as the unit is connected to a power outlet.
It is recommended that this unit is placed on a dedicated circuit.

• Do not overload the power outlets by connect too many appliances to the same outlet. Overloaded wall outlets, extension cords, etc. are dangerous and can result in electric shock and fire.

After power off, don’t turn it on again in 5 seconds. Frequent switching power supply in a short period of time can cause abnormal TV.

Power plug and power cable

• Do not touch the power plug with wet hands.
• Do not place heavy objects on the power cable. Route the cable so that it is not kinked or laid over sharp edges, walked on or exposed to chemicals. A power cable with damaged insulation can cause electric shock and fire.
• Pull the power plug, NOT on the cable when disconnecting. The cable can become damaged and cause a short circuit if pulled on.
• Do not place the power cable near a high temperature object.
• Do not move the TV with the power cable plugged into a socket.
• Do not use a damaged or loose power cable, or a damaged socket outlet.
• Do not use any power cords other than the one supplied with this unit.
• MAIN plug on the power cord is used as the disconnect device, the disconnect device and socket-outlet shall be easily accessible.

Set-up
Check that the location is suitable to bear the load of the TV. Place on a level, sturdy and horizontal base. Ensure that the unit does not hang over the edge of the base when placed in or on furniture. If placed on a cart, use caution when moving to avoid the unit  from tipping over.

• Place the unit in a normal upright horizontal position. It must never be operated vertically, lying flat or hanging overhead from the ceiling.
• Place the unit where it is not exposed to direct sunlight or other sources of heat.
  When mounting the TV on a wall, follow the instructions supplied with the wall-mount, make sure not to install the TV by hanging  the power and signal cables on the back ofthe TV.

Air ventilation and high tern peratu res
Install your TV only where there is proper ventilation, and ensure that there is at least 10 cm free space on the sides and 20 cm above the unit for air circulation. Excessive heat and obstruction of ventilation could lead to fire or early failure of some electric components.

• Do not block any ventilation openings with newspapers, tablecloths, curtains, etc.
• Do not dry clothing etc. on top of the unit.
• Take care not to touch the ventilation openings since they may become hot.
• Do not insert foreign objects into the TV through the vents.

The Stand

• Do not use any stand other than the one supplied with this unit.
• Do not modify or use the stand if it becomes warped of physically damaged.
• During setup, make sure that all the screws are securely tightened.
• Ensure that the TV does not suffer any impact during the attachment of the stand.
• Ensure that children do not climb onto the stand.
• Attach or remove the stand with at least two people.

Prevent small items from getting into the interior of the device through the ventilation slots. Such objects may cause short circuits, which may cause fire. If something should get inside the unit, immediately unplug the power plug of the device and contact service support.

The LED screen
Despite thorough care when manufacturing this display, it cannot be 100% guaranteed that no sub-pixel defects will occur due to technical reasons. These cannot be considered as a device defect in terms of the guarantee. They will not affect the performance and  reliability of the TV.
To prevent “image burn”, avoid displaying still images for long periods of time, there is a possibility that a copy of the image may remain. If the aspect ratio is set to 4:3 for a long period of time, image burn may occur on the black areas. Image burn is not
covered by the warranty.

• Do not apply strong force or impact on the display panel.

Avoid touching the LED screen or touching it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

Radio waves

• Do not use the TV in any medical institutions or locations with medical equipment. Radio waves may interfere with medical equipment and cause malfunction.
• Do not use the TV near any automatic control equipment such as automatic doors or fire alarms. Radio waves may interfere with automatic control equipment and cause malfunction.

If you have a cardiac pacemaker, keep a distance of at least 22 cm from the TV. Radio waves may interfere with the operation of a pacemaker.

Built-in wireless LAN
Do not connect to wireless networks that you do not have the usage rights for. Data transmitted and received over radio waves may be intercepted and monitored.
The built-in wireless LAN uses 2.4 GHz and 5 GHz frequency band. To avoid malfunctions or slow response caused by radio wave interference, keep the TV away from devices such as other wireless LAN devices, microwaves, mobile phones, and other devices  that use 2.4 GHz and 5 GHz signal.

Warning about off-gassing
New furniture, carpet, paint, building materials and electronics can release chemicals into the air through evaporation. After you set your TV up and turn it on for the first time, you may notice a slight smell within a couple of hours. This is because some  components of TV are heating up for the first time. The materials that we use fully meet the environmental requirements and regulations. Your TV is working just fine and the fumes from the off-gassing will diminish eventually.

Supervision

• Do not let children play unsupervised close to the TV. It could tip over, be pushed off or pulled down from the stand surface and injure someone.
• Do not allow a switched-on TV to run unattended.

Volume
Loud music and noises can lead to irreversible damage to your ears. Avoid extreme volume, especially over long periods and when using headphones.
If you hear a drumming noise in your ears, turn down the volume or temporarily stop using headphones.

Thunder Storms
Pull out the power plug and all connected antenna cables from the TV during a thunderstorm. Overvoltage caused by lightning strikes can damage the TV via the antenna system, as well as the wall socket.
Long periods of absence
As long as the power plug is connected to a live socket outlet, the TV will consume power even in standby mode. The power plug and all connected antenna cables should be disconnected out during long periods of absence.

Cleaning and care
CAUTION:
Unplug the power cord prior to cleaning the TV.
Clean the TV, the screen, and the remote control with a soft, moist, clean and colour- natural cloth only. Do not use any chemicals

• Do not subject the surfaces to insect repellent, solvent, thinner or other volatile substances. This may degrade the surface quality.

• Do not spray water or other liquids directly on the TV. Liquid inside the TV could lead to product failure.

• The surface of the display panel is treated and may be easily damaged.
  Take care not to scratch it with fingernails or other hard objects.

• Also wipe the power plug with a dry cloth at regular intervals.

Service/Repair
Never remove the cover/back of the TV; there are no user serviceable parts inside. Refer all service to qualified service personnel.

Packaging
Keep the anti-moisture materials and plastic bags out of reach of children.
Plastic bags can cause suffocation and the anti-moisture material is harmful if swallowed.
If swallowed by mistake, force the patient to vomit and visit the nearest hospital.

Modification
Do not attempt to modify this product in any way. Unauthorised modification could void the warranty of this unit, cause electric shock and fires.

Remote Control batteries

• Incorrect installation may cause battery leakage, corrosion and explosion.
• Replace only with the same or equivalent type.
• Do not mix old and new batteries.
• Do not mix different battery types.
• Do no use rechargeable batteries.
• Do not burn or break up batteries.
• Be sure to dispose of batteries correctly.
• Do not expose batteries to excessive heat such as sunshine, fire or the like.

Outdoor Antenna Grounding
If an outdoor antenna used, be sure the antenna system is protected against voltage surges and built-up static charges.
Disposal
Refer to the recycling section of this manual.

Installing the Stand or Wall mount bracket

CAUTION
Be sure to disconnect the AC power cord before installing a stand or wall mount brackets.
The display on your TV is fragile. Make sure the TV screen is not scratched or damaged by hard objects or from pressure.
After the installation is completed, make sure the TV is steady on a table or firmly attached to a wall mount, before removing all protective film, if any.

Installing the stand
Follow the illustrations and textual instructions below to complete the installation steps:

1. Carefully place your TV face-down on a soft, flat surface to prevent damage to the TV or scratching to the screen.
2. Take out the stand from the accessory bag and then insert the stand into the bottom slots of the TV.
3. Secure the stand to the TV with the 4 screws in accessory tightly.
   

For 75″

1. Carefully place your TV face-up on a soft, flat surface to prevent damage to the TV or scratching to the screen.
2. Take out the 2 stands from the accessory bag and then insert the stands into the bottom slots of the TV.
3. Secure the Base Stand to the TV with the 4 screws in the accessory bag tightly.
   Note: If your table is long enough to place the TV on top of, then insert the base stands into the screw holes ‘A’ that are shown in the illustration. If your table is NOT long enough, then insert the base stand into the screw holes ‘B’ that are shown in the  illustration. Note that these two installation methods types cannot be mixed.

Installing the wall mount bracket
Before mounting the TV, remove the TV stand if you have already attached it, and make sure the wall mount bracket supports the weight of your TV.

CAUTION
When mounting the TV on a wall, follow instructions provided with the wall mount bracket. If it is not correctly mounted, the TV may fall and cause property damage or personal injury.

• Place spacers between the TV and bracket.
• Standard dimensions are shown below.

Wall mount hole pattern (mm)| 200 200(43″)
300 200(50″/55″)
400 200(65″)
400 300(75″)
---|---
Wall mount screw size| M6

• We do not recommend hanging the TV on a slanted wall, and when wall mounting make sure your television remains parallel to the wall and does not lean forward.

NOTE

• The diameter and length of the screws differ depending on the wall mount bracket model.
• Wall mount bracket is optional. Your TV may not have wall mount bracket. Please refer to the actual accessories.

TV Front and Rear

Power button
(Standby/ Source)| Press the power button when in standby mode, and the TV will be turned on.
Press the power button to call up the menu. When the focus is on “Power Off”, wait for 3  seconds, and then the TV will go into standby mode automatically.
Press the power button to call up the menu, and then select among the different input signal  sources.

NOTE

• ANT2 Jack supports power supply for satellite antenna (13/18V, 0.5Amax.)

• Check the jacks for position and type before making any connections.
  Loose connections can result in image or colour problems. Make sure that all connections are tight and secure.

• Not all A/V devices have the ability to connect to a TV, please refer to the user’s manual of your A/V device for compatibility and connections procedure.

• Before connecting external equipment, remove the mains plug from the wall socket. Otherwise, it may cause electric shock.

• Powering on the TV requires several seconds to load programmes. Do not rapidly turn the TV off as it may cause the TV work abnormally.

• The Picture is Only for Reference.

Connection

► Terminals

NOTE
Excessive sound pressure from earphones and headphones can cause hearing loss.

NOTE

• Do not repeatedly insert or remove the Common Access Module as this may damage the interface and cause a malfunction.
• You must obtain a Cl+ module and card from the service provider of the channels you want to watch.
• Cl+ is not supported in some countries and regions.

NOTE

• Exceeding a total current consumption may result in damage. The USB 1.1 and USB 2.0 devices maximum current consumption are 500mA. The USB 3.0 device maximum current consumption is 1A (only for some models).
• For individual non-standard high-capacity mobile hard disk, if its impulse current is greater than or equal 1A, it may cause TV-rebooting or self-locking. So the TV does not support it.

LAN (Wired setup)
Connect your TV to your network by connecting the LAN port on the back of your TV to an external modem or router using a LAN (Ethernet/Cat 5) cable. See the illustration below.
It is recommended to use a modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS, so you don’t have to enter them manually. Most home networks already have DHCP.

Wireless setup
To connect your TV to your network wirelessly, you need a wireless router or modem. See the illustration below.
The built-in Wireless LAN Adapter supports the IEEE 802.11 a/b/g/n/ac communication protocols. It is recommended to use IEEE 802.11ac router. Low transfer rates for b/g may have the influence on the quality of streamed videos and other media.

NOTES

• You must use the built-in Wireless LAN Adapter to use a wireless network because the set doesn’t support external USB network adapters.
• If the wireless router supports DHCP, your TV can connect more easily to the wireless network.
• If you apply a security system other than the systems listed below, it will not work with the TV.
• Security system: WPA, WEP, WPA2.
• In order to guarantee smooth network, the distance between router and TV should be less than 10 metres.

Remote Control

NOTE: The included remote control will vary depending on model, country/region.
Check information according to the actual remote control in the accessory bag.

Buttons of remote control

NOTE: Buttons listed here are for reference only. Actual remote control may vary depending on model, country/region.

Installing Batteries in the Remote Control

1. Slide the back cover to open the battery compartment of the remote control.
2. Insert two AA or AAA size batteries. Make sure to match the ( +) and (-­ ) ends of the batteries with the (+) and (-) ends indicated in the battery compartment.
3. Close the battery compartment with the cover.

NOTE

• Product image is only for reference, actual product may vary in appearance.
• Dispose of your batteries in a designated disposal area.
• Do not mix battery types or combine used batteries with new ones.
• Remove depleted batteries immediately to prevent battery acid from leaking into the battery compartment.
• If you do not intend to use the remote control for a long time, remove the batteries.
• Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
• Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately.
• Risk of fire or explosion if the battery is replaced by an incorrect type.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
• A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

Pairing the Remote Control (only for Bluetooth remote control)
Pair the remote to the TV after you power it on. Keep the remote control within 3 metres from the TV. Press any button (except power and mic button) to pair.

NOTE

• In special cases, press and hold [El] button to pair.
• If an unknown error occurred with the remote, then it could have been caused by interference. Try to remove what’s causing the interference and pair it again.
• If an unknown error occurred in the remote control while the battery power is normal, you can take out the batteries, press any key for 1-2 seconds, and insert them back. Then the remote control will work normally.
• The remote cannot be paired to the TV while the TV is in standby mode.

Remote Control Operation Range

1. The remote control can work at a distance of up to 8 meters in front of the TV set.
2. The remote control angle: taking the remote sensor as an apex, 6 meters away, its controlled horizontal angle is within ±30°, while the vertical angle is within ±15°.
3. The operating distance may vary depending on the brightness of the room.

Disposal of this unit
Product should not be damaged, dismantled or thrown in municipal waste.
It should be packed and handed over to authorised re­cycler.

Specifications

Features, appearance and specifications are subject to change without notice.

Dimension
(W x H x D)
_| Without Stand| 37’9 x 22.0 x 3.4 inches (962 x 560 x 86 mm)| 44.0 x 25.5 x 3.0 inches (1117 x 647 x 77 mm)
With Stand| 37.9 x 24.3 x 7.6 inches (962 x 617 x 194 mm)| 44.0 x 27.8 x 9.9 inches (1117 x 705 x 251 mm)
Weight| Without Stand| 19.2 lbs (8.7 kg)| 24.7 lbs (11.2 kg)
With Stand 4| 20.3 lbs (9.2 kg)| 26.0 lbs (11.8 kg)
Active Screen Size (Diagonal)| 108 cm| 126 cm
Screen resolution| 3840 x 2160| 3840 x 2160
Audio power| 7W + 7W| 10W+ 10W
Operating mode power density| 0.020 Watts/cm2| 0.020 Watts/cm2
Item| 55″| 65″
Dimension
(W x H x D)| Without Stand| 48.4 x 28.0 x 3.0 inches (1230 x 710 x 77 mm)| 57.0 x 32.9 x 3.1 inches (1449 x 835 x 78 mm)
With Stand| 48.4 x 30.2 x 9.8 inches
(1230 x 768 x 250 mm)| 57.0 x 35.6 x 11.6 inches (1449 x 903 x 294 mm)
Weight| Without Stand| 27.1 lbs (12.3 kg)| 40.8 lbs (18.5 kg)
With Stand mi| 28.7 lbs (13.0 kg)| 42.1 lbs (19.1 kg)
Active Screen Size (Diagonal)| 139 cm| 164 cm
Screen resolution 4| 3840 x 2160| 3840 x 2160
Audio power| 10W + 10W| 10W + 10W
Operating mode power density| 0.020 Watts/cm2| 0.020 Watts/cm2
Item| 75″
Dimension
(N x H x D)| Without Stand| 65.8 x 37.8 x 3.1 inches (1671 x 960 x 78 mm)
With Stand| 65.8 x 40.4 x 15.3 inches
(1671 x 1026 x 388 mm)
Weight| Without Stand| 61.7 lbs (28.0 kg)
With Stand| 62.8 lbs (28.5 kg)
Active Screen Size (Diagonal)| 189 cm
Screen resolution| 3840 x 2160
Audio power| 15W + 15W
Operating mode power density| 0.015 Watts/cm2
Power consumption when turned off| N.A.
---|---
Power consumption in standby mode| 0.5 W
Power consumption| Please refer to the rating label.
Power supply| Please refer to the rating label.
Receiving systems| Analog| PAL-D/K, B/G, I, SECAM-D/K, B/G
Digital| DVB-T/T2, DVB-C, DVB-S/S2
Wireless
LAN Module specifications| Frequency Range| 2.4-2.4835GHz 5.15-5.85GHz
Output Power (Max.)| 2.4-2.4835GHz 17dBm
5.15-5.25GHz 14dBm
5.25-5.35GHz(DFS Band) 14dBm 5.49-5.71GHz(DFS/TPC Band) 14dBm 5.725-5.85GHz(for Non EU) 14dBm
Bluetooth Module specifications| Frequency Range| 2.4-2.4835GHz
Output Power(Max.)| 2.4-2.4835GHz,Class1,6dBnn
Environmental
HDMI Input| conditions| Temperature: 41°F – 95°F (5°C – 35°C) Humidity: 20% – 80% RH
Atmospheric pressure: 86 kPa – 106 kPa
| RGB / 60Hz (640×480, 800×600, 1024×768) YUV / 60Hz (480i, 480p, 720p, 1080i, 1080p) YUV / 50Hz (576i, 576p, 720p, 1080i, 1080p) 3840×2160 / 24Hz, 3840×2160 / 25Hz 3840×2160 / 30Hz, 3840×2160 / 50Hz, 3840×2160 / 60Hz

Other Information

Recycling/Licenses
WEEE (Waste Electronic Electric Equipment)
European Directive 2012/19/EU
This symbol on the product or on its packaging indicates that this product must not be disposed of with your household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the  recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Batteries

In accordance with the Battery Directive, used batteries should not be disposed of in the domestic waste. Dispose your batteries in the collection containers specific for this purpose in retail stores.

ROHS (Restriction of Hazardous Substance)
European Directive 2011/65/EU This European directive limits the use of dangerous and hazardous substances which are difficult to recycle.
This allows recycling easily the EEE and contributes to the safeguard of the environment.
Substances included in this product match to the RoHS directive.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation.
Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright© 2012-2022 Dolby Laboratories. All rights reserved. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS:X, and the DTS:X logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries. © 2021 DTS, Inc. ALL  RIGHTS RESERVED.

EPREL Registration Information

Modelidentifier| Eprel registration number| Model
identifier| Eprel registration number| Model
identifier| Eprel registration number
---|---|---|---|---|---
43A7KQ| 1425358| 43A70KQ| 1425370| 43A71KQ| 1425375
43A72KQ| 1425378| 43A76KQ| 1425383| 43A77KQ| 1425386
43A78KQ| 1425388| 43A79KQ| 1425392| 43A7KQTUK| 1425395
43A7OKQTUK| 1425396| 43A71KQTUK| 1425398| 43A72KQTUK| 1425402
43A76KQTUK| 1425403| 43A77KQTUK| 1425407| |
50A7KQ| 1435555| 50A70K0| 1435564| 50A71KQ| 1435565
50A72KQ| 1435567| 50A76KQ| 1435569| 50A77KQ| 1435570
50A78K0| 1435573| 50A79KQ| 1435577| 50A7KQTUK| 1435579
50A70KQTUK| 1435580| 50A71KQTUK| 1435582| 50A72KQTUK| 1435585
50A76KQTUK| 1435586| 50A77KQTUK| 1435594| |
55A7KQ| 1445836| 55A70KQ| 1446260| 55A71KQ| 1446261
55A72KQ| 1446262| 55A76KQ| 1446264| 55A77K0| 1446265
55A78KQ| 1446266| 55A79KQ| 1446267| 55A7KQTUK| 1446268
55A7OKQTUK| 1446269| 55A71KQTUK| 1446271| 55A72KQTUK| 1446274
55A76KQTUK| 1446275| 55A77KQTUK| 1446277| |
65A7KQ| 1440436| 65A70KQ| 1440438| 65A71KQ| 1440439
65A72KQ| 1440440| 65A76KQ| 1440441| 65A77KQ| 1440442
65A78KQ| 1440443| 65A79KQ| 1440445| 65A7KQTUK| 1440448
65A7OKQTUK| 1440449| 65A71KQTUK| 1440450| 65A72KQTUK| 1440451
65A76KQTUK| 1440452| 65A77KQTUK| 1440453| |
75A7KQ| 1542929| 75A70KQ| 1542954| 75A71KQ| 1542959
75A72KQ| 1542961| 75A76KQ| 1542964| 75A77KQ| 1542966
75A78K0| 1542967| 75A79KQ| 1542969| 75A7KQTUK| 1542971
75A7OKQTUK| 1542973| 75A71KQTUK| 1542976| 75A72KQTUK| 1542980
75A76KQTUK| 1542981| 75A77KQTUK| 1542983| |

SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Hisense Visual Technology Co., Ltd. declares that the radio equipment type [ 43A7KQ / 43A70KQ/43A71 KQ / 43A72KQ / 43A76KQ / 43A77KQ / 43A78KQ / 43A79KQ / 43A7KQTUK / 43A70KQTUK / 43A71 KQTUK / 43A72KQTUK / 43A76KQTUK / 43A77KQTUK / 50A7KQ I 50A70KQ I 50A71 KQ / 50A72KQ I 50A76KQ I 50A77KQ I 50A78KQ I 50A79KQ I 50A7KQTUK / 50A70KQTUK / 50A71 KQTUK / 50A72KQTUK / 50A76KQTUK / 50A77KQTUK / 55A7KQ I 55A70KQ I 55A71 KQ / 55A72KQ I 55A76KQ I 55A77KQ I 55A78KQ I 55A79KQ I 55A7KQTUK / 55A70KQTUK / 55A71 KQTUK / 55A72KQTUK / 55A76KQTUK / 55A77KQTUK / 65A7KQ / 65A70KQ / 65A71 KQ / 65A72KQ I 65A76KQ I 65A77KQ I 65A78KQ I 65A79KQ I 65A7KQTUK /  65A70KQTUK / 65A71 KQTUK / 65A72KQTUK / 65A76KQTUK / 65A77KQTUK / 75A7KQ I 75A70KQ I 75A71 KQ / 75A72KQ / 75A76KQ I 75A77KQ I 75A78KQ I 75A79KQ I 75A7KQTUK / 75A70KQTUK / 75A71 KQTUK / 75A72KQTUK / 75A76KQTUK /  75A77KQTUK / ERF2J36H / ERF2K36H / ERF2L36H / ERF2M36H / ERF2N36H / ERF2O36H / ERF2P36H / ERF2S36H / ERF3N80H / ERF2F36H / ERF3C96H ] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://global.hisense.com/support/certificate-download/.

For Great Britain:
SIMPLIFIED UK DECLARATION OF CONFORMITY
Hereby, Hisense Visual Technology Co., Ltd. declares that the radio equipment type [ 43A7KQ / 43A70KQ/ 43A71 KQ / 43A72KQ / 43A76KQ / 43A77KQ / 43A78KQ / 43A79KQ / 43A7KQTUK / 43A70KQTUK / 43A71 KQTUK / 43A72KQTUK / 43A76KQTUK / 43A77KQTUK / 50A7KQ I 50A70KQ I 50A71 KQ / 50A72KQ I 50A76KQ I 50A77KQ I 50A78KQ I 50A79KQ I 50A7KQTUK / 50A70KQTUK / 50A71 KQTUK / 50A72KQTUK / 50A76KQTUK / 50A77KQTUK / 55A7KQ I 55A70KQ I 55A71 KQ / 55A72KQ I 55A76KQ I 55A77KQ I 55A78KQ I 55A79KQ I 55A7KQTUK / 55A70KQTUK / 55A71 KQTUK / 55A72KQTUK / 55A76KQTUK / 55A77KQTUK / 65A7KQ I 65A70KQ I 65A71 KQ / 65A72KQ I 65A76KQ I 65A77KQ I 65A78KQ I 65A79KQ I 65A7KQTUK /  65A70KQTUK / 65A71 KQTUK / 65A72KQTUK / 65A76KQTUK / 65A77KQTUK / 75A7KQ I 75A70KQ I 75A71 KQ / 75A72KQ / 75A76KQ I 75A77KQ I 75A78KQ I 75A79KQ I 75A7KQTUK / 75A70KQTUK / 75A71 KQTUK / 75A72KQTUK / 75A76KQTUK /  75A77KQTUK / ERF2J36H / ERF2K36H / ERF2L36H / ERF2M36H / ERF2N36H / ERF2O36H / ERF2P36H / ERF2S36H / ERF3N80H / ERF2F36H / ERF3C96H ] is in compliance with Radio Equipment Regulations 2017. The full text of the UK declaration  of conformity is available at the following internet address: https://global.hisense.com/support/certificate-download/.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>