mountune MK4 FOCUS ST Clubsport Gearshift Padoles Installation Guide
- June 1, 2024
- mountune
Table of Contents
Installation Guide.
MK4 FOCUS ST Clubsport Gearshift Padoles
CLUBSPORT GEARSHIFT PADDLES Mk4 Focus st Fiesta/kuga/puma
- Flat-blade screwdriver
- T27 torx
- Trim tool
tools required:
Time 60 minutes Approx.Disconnect negative terminal from battery (critical that this is performed first!)Remove the three, 7mm fixings.Use a trim tool to remove upper steering column trim.Using a flat head screwdriver, push clips on both sides to release airbag.Disconnect cable from airbag and remove – pull orange tab upwards to remove airbag assembly.![mountune MK4 FOCUS ST Clubsport Gearshift Padoles
- Step 6](https://manuals.plus/wp-content/uploads/2024/04/mountune-MK4-FOCUS- ST-Clubsport-Gearshift-Padoles-Step-6.jpg)Disconnect cables from buttons and remove trim from steering wheel (gentle force may be required).Disconnect paddle cable and remove T27 Torx fixing from both sides.Remove paddle assemblies from the steering wheel.Push the pin out of the original paddle assembly.Using flat head screwdriver, push tab in to remove circuit assemblies from OE paddles.Install circuit assemblies to new paddles, ensuring paddle locks in to tab.Reinstall pin to each paddle.Reattach paddles, fixings and cable connectorsReattach steering wheel trim (gentle force required).Reconnect air bag, orange connector needs to be pushed in otherwise it won’t seat correctly.Reconnect battery and installation is complete (an error code is likely to appear but will clear after driving).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>