MIS142 Fairfield 24in Elevated Garden Bed Instruction Manual

: June 1, 2024
: Fairfield

Table of Contents

PACKAGING CONTENTS
TOOLS REQUIRED
Assembly Instructions
General Planting Recommendations
Customer Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MIS142 Fairfield 24in Elevated Garden Bed

MIS142 Fairfield 24in Elevated Garden Bed

PACKAGING CONTENTS

Packaging Contents

TOOLS REQUIRED

Tools Required
Since cedar is a softer wood, we recommend using a screwdriver when assembling. If using a power drill, be sure to use a low torque setting.

Assembly Instructions

Assemble Side Frames
Attach 2x Legs (A) to lx End Panel (B) with 4x Screws (E). Repeat to assemble the other End Panel.
Important: Be careful when assembling the wood stand to not overtighten the screws.
Assemble Main Frame
Attach Support (c) to 2x Long Panels (D) with 4x Screws (E).
Complete Wooden Base
Attach the side frames to the main frame using Bx Screws (E).
Optional: Place 4x Rubber Feet (F) at the bottom of Legs (A) for added moisture protection.
Plant and Enjoy!
Place the Planter on top of the completed base to finish assembling the Elevated Garden Bed.
Note: Avoid using garden soil or top soil for container planting, a potting mix is strongly recommended and will ensure better plant growth.

General Planting Recommendations

Polyresin Planter UV Protected Shock Resistant All Weather Material
General Planting Recommendations

This outdoor planter has a built-in water reservoir and a pre-formed overflow hole to ensure your plants have consistent moisture without being oversaturated.
Rinse clean with a garden hose; for a deeper clean, use a power washer. The cedar base should be re-stained every 3 years, to extend the life of the product.
Mayne offers a limited 15-year warranty on the planter and a 5-year warranty on wooden components.
Note: Although great care has been taken in selecting the best quality lumber, wood is a product of nature and may be susceptible to surface “checking” or splitting as well as changes in aesthetics. This will not affect the stability of the product.