petfamily B0B712MGXJ Intelligent Cyclone Deodorizer User Guide
- June 1, 2024
- petfamily
Table of Contents
petfamily B0B712MGXJ Intelligent Cyclone Deodorizer User Guide
Step 1
Activate the device
Press and hold the Activation Button for 2 seconds, the device will activate
with the blue light flashing twice.
Step 2
Turn on / Turn off the device
- Tap the Touch Switch to turn the device on and start operation.
- Long press the Touch Switch for 5 seconds to turn off the device and stop its operation.
After turning on the device
Blue breathing light: the device is operational.
Red breathing light: the device needs to be charged.
The initial battery level of the device is below 30%, it is recommended to
charge it before using.
Hanger
- Choose a dry, clean and flat surface.
- Remove the backing paper, press the hanger firmly for 10 seconds, then let it stand for 5 minutes.
- Align and rotate clockwise the device at the recess on the hanger, until you hear a ‘crack’ sound, indicating the device is successfully mounted.
- Begin by the Fresnel indicator points to the right.
- Insert it into the recess, and then rotate it clockwise.
- Both Battery-Powered Mode and Direct Plug-In Mode are all workable.
- When charging the device
- A red breathing light indicates the battery level is below 10%;
- A blue breathing light indicates it’s charging;
- A steady blue light indicates the battery is fully charged.
- If the device is not going to be used for a long period.
First turn it off, and then press and hold the Activation Button for 5 seconds.
After the red light flashes twice, the device will enter a deactivated state.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>