Bayt 920-076v80 4 Level Height Adjustable Electric Standing Desk User Manual

Bayt 920-076v80 4 Level Height Adjustable Electric Standing Desk

Product Information

Specifications

• Brand: BAYT
• Product Type: Sit-Stand Desk
• Recommended Usage: Office, Home Office
• Assembly Required: Yes
• Color: [Specify Color Options]
• Material: [Specify Material]

Product Usage Instructions

Safety Precautions

Before using the BAYT sit-stand desk, please read and follow these safety precautions:

• Follow the assembly instructions carefully and only use the product for its intended purpose.
• If there is an odor when opening the packaging for the first time, allow the unpacked product to air out in a shaded and ventilated area for a few days.
• During assembly, lightly tighten all screws in the correct position before fully tightening them. Use a cross-head screwdriver for assembly.
• Regularly check the bolts and connections of the product to ensure safe usage.
• Assemble the desk on a soft, flat, and clean surface to prevent scratches and damage.

Warnings

Pay attention to the following warnings:

• Keep parts and packaging materials away from children and pets during assembly to prevent injury or choking hazards.
• Slowly and carefully adjust the desk up or down to avoid trapping hands in metal connections, especially for children.

Installation Instructions

1. Step 1: Mount [specify part] on [specify location] with [specify tool].
2. Step 2: Install [specify part] on [specify location] with [specify tool]. Fully tighten all screws in Step 3.
3. Step 3: Loosen the motor rod and the crossbar Lock [specify part] on [specify location] and [specify part].
4. Step 4: Install [specify part] on [specify location] with [specify tool].
5. Step 5: Install [specify part] on [specify location] with [specify tool].
6. Step 6: Install [specify part] on [specify location] with [specify tool] and [specify part] on [specify location] with [specify tool].
7. Step 7: Make the cable connections.

User Control Panel

• LED Screen: Press any button to activate the LED screen.
• Up Button: Hold the up button to raise the desk.

Frequently Asked Questions (FAQ)

Q: What should I do if I encounter missing components during assembly?

A: If any components are missing from the packaging, please contact us for assistance. We will ensure you receive the necessary parts for assembly.

Q: How often should I check the bolts and connections of the product?

A: To ensure safe usage, we recommend checking the bolts and connections regularly, ideally every few months, to prevent any potential issues.

Thanks for choosing the BAYT Height Adjustable Desk.

IMPORTANT:

• Read the instructions in this manual carefully before using the product.
• Failure to comply with the instructions given in the manual or using this product in ways other than the ones mentioned in this manual may result in injury to yourself or damage to the product.
• Make sure to include this manual when passing this product on to third parties.
• The images in the user manual are for illustrative purposes only and may differ slightly from the product.

NOTES

• Please follow the assembly instructions precisely and only use the product as intended.
• If an odor is present when first opening the package, please leave the unwrapped product in a shaded and ventilated area for a few days to air out.
• Before assembly, please check the product for defects or missing accessories. If any defects are found or accessories are missing, do not use the product as damage or injury may occur.
• Please contact us for assistance and replacement.
• During assembly, please only slightly tighten all screws in their correct position first, then fully tighten them. A Philips screwdriver is recommended but not included.
• It is suggested you regularly check the product’s bolts and connections to ensure safe use.
• Assemble the item on a soft flat and clean surface to avoid scratches and damage.

WARNINGS

• During assembly, keep parts and packaging materials away from children and pets as they could cause injury and are a potential choking hazard.
• Avoid sharp objects or corrosive chemicals to prevent damage to the product.
• Please raise or lower the desk slowly and cautiously to avoid pinching your hands with metal joints. This is especially true for children.

THE PACKAGE

1. Lift column
2. Lift column
3. Base
4. Center rail
5. Crossbar
6. Side Bracket
7. Desk Board
8. Wire Grommet
9. Pothook
10. Hand controller
11. Power adapter
12. Tool
    • Bolt M6x13
    • Bolt M6x35
    • Self-tapping screw ST4x12

• Avoid using sharp objects such as a knife to cut open packing as you may accidentally damage the product.
• Please keep the original box in case you might need to return or replace the product.
• Please check and ensure that all components are in the package. Feel free to contact us for help if something is not included.

THE INSTALLATION POSITION OF THE MAIN ACCESSORIES

CAREFULLY Heavy product: once mounted, lift the desk with 2 people.

DESK INSTALLATION INSTRUCTIONS

1. STEP 1: Install ③ on ② and ① with Ⓑ.
2. STEP 2: Install ④ on ② and ① with Ⓐ. Tighten ALL the screws completely in STEP 3.
3. STEP 3: Unscrew the motor rod, and the crossbar ⑤. Lock ⑤ on ① and ②.
4. STEP 4: Install ⑥ on ② and ① with Ⓐ.
5. STEP 5: Install ⑥ on ⑦ with Ⓐ.
6. STEP 6: Install ⑩ on ⑦ with Ⓐ and ⑨ on ⑦ with Ⓒ.
7. STEP 7: Make the cable connections.

THE HAND CONTROLLER

1. LED display
   • Press any button to wake up the LED display.
2. Up button
   • Press and hold the “˄” button to raise the desk.
3. Down button
   • Press and hold the “˅” button to lower the desk.
4. Memory buttons
   • The desk can store 3 memory heights (memory 1, 2, and 3).
5. Set button
   • Press the “S” button to set the memory height.
   • Press and hold the “S” button for locking and unlocking the desk.

Note: Before using the height-adjustable desk, it’s recommended to perform a reset to ensure that both lift columns are at the same height, as they may have slight variations from the factory (see OPERATING INSTRUCTIONS – Reset).

OPERATING INSTRUCTIONS

• Up and down operation
  • Press and hold the button “˄” or “˅” to adjust the height up and down with the height displayed on the screen during operation. Release the button at the desired height.
• Set the memory height
  • This desk can store 3 memory heights. Press the “S” button once and the height number will flashing, and then press the “1”, “2” or “3” button to memorize the current height.
• Call the memory height
  • Press the button “1”, “2” or “3” to adjust to the corresponding memory height.
• Reset
  • The reset operation is needed when the system error occurs or the screen displays or Press and hold the “˅” button for 7s till the screen displays and Release the “˅” button and then press “˅” to enter the initialization mode.
  • The desk runs to the lowest position and the screen displays the lowest height number when the initialization is complete.
• Lock
  • Press and hold the “S” button for 3s, and the screen displays “SET”. Now the desk cannot be raised or lowered.
• Unlock
  • Press and hold the “S” button for 3s to enter the lock system and the screen displays “OFF”. Now press and hold the “S” button for 3s and the screen displays the current height. The desk has been unlocked.

Error Code

controller cable
E-1| The current height cannot be saved| Reset
E-2| The motor is locked| /
E-5| Hall cable disconnected| Adjust the motor cable or hall cable
over| Overload protection| Reduce the load (Maximum load is 60kg)
hot| Overheating protection| Wait for the power supply

temperature to cool down, or reset the system after 10min to restart

voL| Over-voltage protection| Replace the main power supply
E-3| The desktop is tilted during the operation| If reset alone doesn’t work, power off to rotate the drive shaft to level the desk legs, and power on to reset.

DISPOSAL

• The packaging material is recyclable. Dispose of it in an environmentally friendly manner and take it to a recycling center.
• Take the product to a waste collection service at the end of its life. Correct separate collection for the subsequent recycling, processing, and environmentally friendly disposal of the materials helps to prevent possible negative impacts on the environment and health and promotes the recycling of the materials that make up the product.

WARRANTY

We grant a 1-year warranty on our products. The customer must be able to show proof of purchase and the warranty must be made within 1 year from the date of purchase.

Please note that the warranty does not apply:

1. Damage caused by improper use or repair
2. Parts subject to wear
3. For defects of which the customer was aware at the time of purchase
4. In the event of defects due to the customer’s fault
5. In case of damage by third parties

• Dennepark B.V.
• Keersopstraat 59
• 3044 EX Rotterdam
• Nederland
• klantenservice@dennepark.nl
• www.dennepark.nl

Documents / Resources

| Bayt 920-076v80 4 Level Height Adjustable Electric Standing Desk [pdf] User Manual
920-076v80 4 Level Height Adjustable Electric Standing Desk, 920-076v80, 4 Level Height Adjustable Electric Standing Desk, Height Adjustable Electric Standing Desk, Adjustable Electric Standing Desk, Electric Standing Desk, Standing Desk
---|---

References

• Dennepark Webshop | Reken direct & veilig af

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>