HUAWEI T0008 Bluetooth 4E Wireless Earphone User Guide

June 1, 2024
Huawei

HUAWEI T0008 Bluetooth 4E Wireless Earphone

Product Information

Specifications

  • Earbuds model: T0008
  • Charging case model: T0008L
  • Half-in-ear mild noise cancellation
  • USB-C charging
  • Bluetooth connectivity
  • Customizable controls via the HUAWEI AI Life app

Product Usage Instructions

Pairing and Connecting

  1. Open the charging case and leave the earbuds inside. Hold down on the Function button for 2 seconds until the indicator flashes white to enter Pairing mode.
  2. Enable Bluetooth on your device, search for the earbuds, and complete the pairing. Earbuds will automatically enter Pairing mode when opening the case for the first time.

Restoring to Factory Settings

  • To restore the earbuds to factory settings, open the charging case, leave the earbuds inside, and hold down the Function button for 10 seconds until the indicator flashes red.

Shortcut Controls

  • Swipe up/down: Adjust volume
  • Double-tap: Play/Pause, Answer/End call
  • Press and hold: Enable/Disable noise cancelling, Reject incoming call

Charging

  • Connect the case to a power source using a USB-C cable to charge it. Place the earbuds in the case to initiate automatic charging.

Noise Cancellation

  • Ideal for quiet environments, the earbuds provide mild noise cancellation for low-frequency sounds while allowing you to stay aware of your surroundings.

FAQ

  • Is it safe to use the earbuds for an extended period?
  • To protect your hearing, avoid listening at high volumes for a long time. Consult a medical professional if you use hearing aids.
  • How can I disable automatic firmware updates?
  • You can disable automatic firmware updates in the device settings.
  • Where can I find disposal and recycling information?
  • For disposal and recycling information, refer to the product manual or contact Huawei Customer Service.

Quick Start Guide

Downloading and installing the app

  • Scan the QR code to download and install the HUAWEI AI Life app, where you can try out more features and customize the settings for your earbuds.

Pairing and connecting

  1. Open the charging case and leave the earbuds inside. Hold down on the Function button for 2 seconds until the indicator flashes white. The earbuds will then enter Pairing mode.
  2. Enable Bluetooth on your device to be paired with the earbuds, then search for the earbuds and complete the pairing.

The earbuds will automatically enter Pairing mode when you open the charging case for the first time.

HUAWEI-T0008-Bluetooth-4E-Wireless-Earphone-FIG-2

Restoring the earbuds to their factory settings

  • Open the charging case and leave the earbuds inside.
  • Hold down on the Function button for 10 seconds until the indicator flashes red.
  • The earbuds will then be restored to their factory settings before re-entering Pairing mode.

Shortcut controls

HUAWEI-T0008-Bluetooth-4E-Wireless-Earphone-FIG-3

  • You can also customize the double-tap gesture in the HUAWEI AI Life app.

Charging the case

  • Connect the case to a power source via a USB-C cable to begin charging it.

  • The indicator will remain steady when the case is being charged.

Charging the earbuds

  • Place the earbuds in the charging case and close the case to initiate automatic charging.

HUAWEI-T0008-Bluetooth-4E-Wireless-Earphone-FIG-5

Half-in-ear mild noise cancellation

  • The earbuds are ideal for quiet environments, such as offices and libraries. They suppress low-frequency noise without blocking out ambient sounds and traffic noise, helping you stay plugged into your surroundings.
  • The noise cancellation can be less efficient for medium and high frequencies, such as voices, broadcasts, horns, and impacts.

Safety Information

Before using and operating this device, read the following precautions to ensure optimal device performance and avoid dangerous use or unauthorized operations.

  • To protect your hearing, do not listen to audio at a high volume for a long period.
  • Some wireless devices may interfere with implantable medical devices and other medical equipment, such as pacemakers, cochlear implants, and hearing aids. When using the product, keep it at least 15 cm away from such medical devices. Consult the manufacturer of your medical equipment for more information.
  • Ideal temperatures: 0°C to 35°C for operating; -20°C to +45°C for storage.
  • Ensure that the power adapter meets the requirements of IEC/EN 62368-1 and has been tested and approved according to national or local standards.
  • Observe all local traffic laws and regulations while using this product. Do not use this device when you are driving.
  • Keep this device and its accessories that may contain small components out of the reach of children. Otherwise, children may damage this device and its accessories by mistake, or swallow the small components, which may cause choking.
  • Avoid using the device in dusty, damp, or dirty environments, or near sources of magnetic interference.
  • Avoid disassembling or modifying your device and its accessories. Unauthorized disassembly and modifications may result in voiding the factory warranty. If your device is faulty, visit an authorized Huawei Customer Service Center for assistance.

Warning

  • This device contains a coin, button, or small-sized cell battery. Do not swallow the battery, as it constitutes a chemical burn hazard.
  • If the coin, button, or small-size cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
  • Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
  • Keep the battery away from fire, excessive heat, extremely low air pressure and direct sunlight. Do not place it on or in heating devices. Do not disassemble, modify, throw, or squeeze it. Do not insert foreign objects into it, submerge it in liquids, or expose it to external force or pressure, as this may cause it to leak, overheat, catch fire, or even explode.
  • Do not attempt to replace the battery yourself — you may damage the battery, which could cause overheating, fire, and injury. The built-in battery in your device should be serviced by Huawei or an authorized service provider.
  • The nameplate of this device is attached to the inside of the charging case lid.

Precautions

  • Keep the metal contact points on the earbuds and charging case clean. Otherwise, the earbuds may not function properly.
  • If you experience any skin irritation while wearing the earbuds, remove them and clean them thoroughly. If the issue persists, seek advice from a medical professional.
  • Enabling noise cancelling may affect your awareness of surrounding sounds and alarms. Ensure that you are in a safe environment when using this function.
  • This device’s firmware will automatically update whenever it connects to a previously paired Honor device (released before the end of 2020) or a previously paired Huawei device, and Wi-Fi or mobile data is enabled. You can disable automatic firmware updates in Settings.

Disposal and recycling information

This symbol on the product, battery, literature, or packaging means that the products and batteries should be taken to separate waste collection points designated by local authorities at the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner that conserves valuable materials and protects human health and the environment. For more information, please contact your local authorities, retailer, or household waste disposal service, or visit the website https://consumer.huawei.com/en/.
UK regulatory conformance

  • Hereby, Huawei Device Co., Ltd. declares that this device T0008/T0008L complies with the relevant statutory instruments in the UK. The full text of the declaration of conformity is available at the following internet address: https://consumer.huawei.com/certification.

UK PSTI Compliance

  • This product meets the relevant security requirements specified in Schedule 1 of the Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023. The full text of the PSTI Statement of
  • Compliance is available at the following website: https://consumer.huawei.com/certification.

EU Regulatory Conformance

  • Hereby, Huawei Device Co., Ltd. declares that this device T0008/T0008L complies with the following Directive RED 2014/53/EU, RoHS 2011/65/EU, EU REACH regulation, and Batteries (where included) directive.
  • The full text of the EU Declaration of Conformity and the most recent information about accessories & software are available at the following internet address: https://consumer.huawei.com/certification.

Frequency Bands and Power

  • Bluetooth: 2.4 GHz 12.5 dBm.

RF Exposure Information

  • This device is a low-power radio transmitter and receiver. As recommended by international guidelines, the device meets applicable national SAR limits of 2.0 W/kg (10g) and 1.6 W/kg (1g).
  • 10g SAR: Meets low-power exclusion level, SAR test is not required.
  • 1g SAR: The highest reported SAR value: Head SAR: 0.51 W/kg.

Legal Notice

  • Copyright © Huawei Device Co., Ltd. 2024. All rights reserved.
  • All contents in the documents in the packaging box, including but not limited to information about and portrayals of the appearance, colour, size, and supported features of the product (the latest features will come with software updates), are for reference only.
  • The actual product may vary.
  • The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of this mark by Huawei Technologies Co., Ltd. is under license. Huawei Device Co., Ltd. is an affiliate of Huawei Technologies Co., Ltd.

Privacy Protection
To better understand how we protect your personal information, please see the privacy policy at https://consumer.huawei.com/privacy-policy, or read the privacy policy and service terms using the corresponding app.
Software License Agreement
Please read the software license agreement carefully before using this device. By using the device, you indicate that you agree to be bound by the license agreement. To read the agreement, please visit the following website: https://consumer.huawei.com/en/legal/eula/.
Open Source Software Notice
For the open-source software statement of your device, please visit https://consumer.huawei.com/en/opensource/ and search for the device name.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Huawei User Manuals

Related Manuals