NCOUUOCN BMW Series 12.3 Inch Dash Cluster Monitor Car LCD Screen Installation Guide

NCOUUOCN BMW Series 12.3 Inch Dash Cluster Monitor Car LCD Screen

Product Information

Specifications:

• Model: BMW Series Dash Cluster Installation Instructions
• Suitable for: F chassis models, E chassis models
• Accessories: USB Upgrade Harness, 2 adapter plugs

Product Usage Instructions

01 Product Setup and Plug Modification:

Ensure to carefully read the instructions before installation. Professional installation is recommended.

Step 1: Press the snap switch on the large plug to remove the plug shell and obtain 2 small plugs.

Step 2: Insert the small plug of the green harness into the small adapter plug.

Step 3: Plug in the power supply as per the provided instructions.

02 Installation Steps:

1. Insert the modified power plug into the designated slot.
2. Insert the modified fiber optic signal plug.
3. No need to connect the USB upgrade jack.

03 Settings:

After installation, manual setup is required. Follow the instructions to complete the settings. Use the BC button on the steering wheel for setting operations. Click on the BC button to select a function and press and hold to enter that function.

04 E-chassis HUD Function:

If the HUD display information is not as desired after installation, follow these steps:

1. Click on Settings on the center screen.
2. Then, click on My Car.
3. Inside, find the display options for adjustment.

FAQ

Q: What if the cruise function or other functions are not normal after installation?

A: Check the model configuration by entering through the BC key, navigate to system settings, protocol settings, input password 4321, and set corresponding functions.

About the product

• The 2 most important accessories you receive in your package, besides the LCD dashboard,
• This is indispensable for the installation of the speedometer, please take care to keep it

Read carefully before installation, professional installation is recommended

Plug conversion

The original plug on some models of vehicles is a large plug with integrated power and fiber optic signals, then the plug needs to be modified

• Step 1: Press the snap switch on the large plug, it will take off the plug shell and get 2 small plugs
• Step 2: Take the small plug of the greenharness and insert it into the small adapter plug
• Step 3: Plug in the power supply, following the instructions in the picture

Installation steps

1. Power plug
   Insert the modified power plug into the

2. fiber optic signal
   Insert the modified fiber optic signal plug

3. USB upgrade jack
   No need to connect

Settings

After installation, manual setup is required, so please follow the instructions to complete it

BC Button

Setting operation of the instrument is accomplished with the steering wheel- controlled BC button Click on the BC button to select a function Press and hold the BC button to enter the function.

The up and down buttons of the handrail

Original factory style interface, individual style can be switched at will. Can switch the color

Password “0168”

The LCD speedometer setup requires 2 passwords, “O168” is the factory setup password for mileage input, and tank volume. Usually it is synchronized automatically, but if the information is not synchronized, or inaccurate, you need to set it manually.

Steps:

1. Short press BC button to enter setting
2. Select Factory Settings
3. Enter the password 0168
4. Set the corresponding function
5. After filling in the settings, click the Save button to save

Fuel tank data

Password “0169”

The meter supports different temperature parameters, data units, in order to satisfy customers in different countries and languages, etc. Short press BC button to setting–> Factory Settings–> Enter the password 0169–>Set the corresponding function–>=Save Settings

Model configuration

After the installation is complete, if the cruise function or other functions are not normal! Please check the model configuration; Enter through the BC key, -› system settings-› protocol settings-›input password 4321-> set corresponding functions

E-chassis HUD function

For vehicles with E-chassis If, after installation and debugging of the settings in the instrument. The HUD display information is not what you want Then you need to adjust it in the settings of the radio screen! It is set in the center display

Setup steps:

1. First, click Settings on the center screen
2. Then click on My Car
3. There is a display option inside
4. Click in, there is the word “parallel display” This is the setting for the flat screen display. Here you can set the function of HUD display

F-chassis HUD

For F chassis model vehicles, the HUD function can be set to be modified in case of error Setup steps: Enter through the BC key, -› system settings-> protocol settings–›input password 4321-> set corresponding functions

Reference data

• Super:
  • Fast service, fast shipping speed. Is what we should do for you?
• High Quality:
  • High quality products, is the root of our survival
• Zeal:
  • Enthusiastic service and help so that I can better help you
• Sincere:
  • Sincere attitude, hope to have more communication with you
• Resurect:
  • With newer, more modern products, your car can have another life! You can make your car give you more company

Reminders

Installation manual content, for your installation and use of reference, if you encounter more problems, please to our professional after-sales team feedback!

Ability to send fault videos

• Amazon Mail. Go to my store home page and click “Ask a Question.” I will get back to you within 12 hours
• Send video to: mryang115@gmail.com
• Send fault video to WhatsApp: +86 181 0954 0115

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>