boAt Airdopes Supreme Bluetooth Wireless Earbuds User Guide
- June 1, 2024
- Boat
Table of Contents
boAt Airdopes Supreme Bluetooth Wireless Earbuds User Guide
PACKAGE CONTENTS
PRODUCT LABELLING
**POWER ON/OFF
**
Insta Wake N’Pair (IWP)
**BLUETOOTH PAIRING
**
Choose “Airdopes Supreme” to Connect
MULTIPOINT CONNECTION
Pair Airdopes Supreme with your first media device via Bluetooth
Turn off the Bluetooth on this device. Switch on the Bluetooth on your second
media device to pair with Airdopes Supreme
Finally, switch on the Bluetooth of the first media device again.
Congratulations! Your Airdopes Supreme is now connected to both the devices successfully
FUNCTIONS (CALL/MUSIC
TOUCH FUNCTIONS
WITH IN-EAR DETECTION
Tap Once
Tap Twice
L Left Earbud
R Right Earbud
PLUG IN TO
- Answer Cals
- Play Music
TAKE OUT TO
- Switch Device
- Pause Music
Note: The earbuds may start at 100% vollume level when first switched on. You can adjust the volume to your preferred levell using the volume controls on the media device.
FUNCTIONS (BEAST™ MODE/SPATIAL SOUND
Long Touch (35)
L RLeft Earbud
R Right Earbud
Note: The earbuds may start at 100% volume level when first switched on.
You can adjust the volume to your preferred levell using the volume controls
on the media device.
HEARABLES APP COMPATIBILITY
Discover the following features of your Airdopes only on the Hearables App:
- Connectivity and Battery Status
- Touch Control Customization
- Self-Diagnostics Function
- Activate/Deactivate Spatial Audio
- Activate/Deactivate In-Ear Detection
RESET AIRDOPES
FORGET DEVICE
OPEN CASE & PERFORM FRESH CONNECTION
PRESS RESET BUTTON FOR 10 SECONDS
LED STATUS GUIDE’
<30%: 3 RED LED FLASHES
LOW BATTERY
30-70%: 3 WHITE LED FLASHES >70%: 3 GREEN LED FLASHES
CHARGING
100% : GREEN LED INDICATION
FULLY CHARGED
30%: RED LED FLASHES WITH TONE PROMPT
LOW BATTERY
30%-100%: 3 BLUE LED FLASHES
FULLY CHARGED
SPECIFICATIONS
| Headphone Type | TWS |
|---|---|
| Bluetooth Version | 5.2 |
| Music Playtime | Up To 50 Hours (At 60% Volume) |
| Number Of AI ENx™ Equipped Mics | 4 |
| IWP™ Tech | Yes |
| BEAST™ Mode | Yes; 65ms Low Latency |
| Transmission Range | 10 m |
| Driver Size | 10 mm*2 |
| Supported Codec | AAC/SBC |
| Frequency | 20 Hz-20 kHz |
| Battery | 400 mAh (Case); 35 mAh 2 (Earbuds) |
| ASAP™ Charge | Yes, 10 Mins Charge= 150 Mins Playback |
| Charging Time | 1.5 Hours (Case); 30 Mins (Earbuds) |
| Charging Interface | USB Type-C |
| Water Resistance | IPX4 |
CHARGING GUIDELINES
Charging norms & Precautionary Guidelines: –
- Charger/Brick/Adapter
- Cable/Wire
| 5V 2A: Standard Cable (35 strands@0.10mm diameter/ strand
Any other accessory can be used to charge the product as long as the above-
mentioned norms are followed.
Note:
- Before using the earbuds for the first time, it is recommended to fully charge them.
- Please note that the earbuds cannot be used/switched on while charging
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>