am co za H-PRESS-2938 Electric Flatironing Machine User Manual
- June 1, 2024
- am co za
Table of Contents
H-PRESS-2938 Electric Flatironing Machine
“`html
Specifications:
- Product Name: Electric High Pressure Heat Press Machine
- Model: F380
- Heating Method: Heating Coil
- Rated Voltage/Frequency: 220-240V~50Hz 930W
- Net Weight: 15.1kg
- Gross Weight: 17.1kg
- Outer Box Size: 575480280mm
- Outer Box Volume: 0.077 cubic meters
Product Usage Instructions:
Getting Started:
-
Connect the power cord by plugging the aviation connector into
the heating plate and then connecting the power cord to the power
outlet on the side of the machine. -
Press the startup button after powering on to start the
machine. It will automatically heat up. -
To shut down, press and hold the power button.
-
The machine will auto shutdown if there is no operation within
120 minutes.
Temperature Setting:
-
Turn the display half a turn to enter the temperature setting
mode. -
After a beep sound, turn the switch to the right to increase
the temperature (+) or to the left to decrease the temperature
(-).
Time Setting:
-
Turn the display half a turn to enter the countdown setting
mode. -
After a beep sound, turn the switch to the right to increase
the time (+) or to the left to decrease the time (-).
Safety Instructions:
-
Before operating, read and save all instructions provided.
-
Keep the machine unplugged when moving or installing
accessories. -
Operate on a flat and stable platform under ventilated
conditions. -
Wear appropriate protective equipment when using the
machine.
FAQ:
Q: What should I do if the machine is not working
properly?
A: Do not use the machine and refer to the user manual for
troubleshooting steps. If the issue persists, contact customer
service for assistance.
Q: Can children operate this machine?
A: No, only adults who understand the user manual should operate
this machine. Keep out of reach of children.
“`
HIAT PRESS
Electric Flatironing Machine
Can be opened and pressed automatically SKU: H-PRESS/2938 WhatsApp: 060 600
6000 Website: am.co.za Email: services@am.co.za
User Manual
A Warnings must be followed carefully to avoid body injury.
1.Startandstopbuttons 2.Heatingplate 3. Upperinsulationshell 4.Pressdownholder
5. Heatinsulationpad 6.LEDDisplay 7.Gearedmotor
1.LOGO 2.Temperaturedisplay 3.Knobswitch 4.Startbutton 5.Timedisplay
6.Timeunit 7.Centigrade 8.Fahrenheit
–
OF -OC
1. In shutdown state. 2.Press and hold the start butt( 3.Turn the switch to
select the I
temperature unit. 4.Short press the start button tt
machine.
Temperature setting
1.Turn the display half a turn to 2.Enterthetemperaturesettin(
after a beep sound 3.Turn the switch to the right to
the temperature (+) 4.Turn the switch to the left to n
temperature (-)
Time setting
1.Turn the display half a turn to 2 . Enter the countdown setti ng
a beep sound 3.Turn the switch to the right to
the time (+) 4.Turn the switch to the left to n
time (-)
Getting Started
1. Connect the power cord
Connect the aviation conn of the heating plate, then ct the power cord to the
powe the side of the machine ant other end into the AC sock
2.Startup After power on, short press the button to start the machine.
After startup, the machine will automatically heat up.
3.Shutdown Press and hold the power butt( to shut down.
4.Auto shutdown The machine will automatic, shut down if there is no oper
within 120min.
iiiiiiiiiiE
EiiiiiiiiiE
Placing sequence of lower plate pad 1. Top: White high temperature blanket 2.
Middle: Blue sponge
E’BB i,ij
Transfer material : Heat transfer paper Turn the switch to the right to set
the temperatu re to 2oooc . Turn the switch to the left to set the time to
60s.
!E!El ;:”;:
Transfer material: PET film Turn the switch to the right to set the
temperature to 185°c . Turn the switch to the left to set the time to 25s,
Fi
c) be printed.
2.Turn on the heating plate to increase the temperature.
0©
00
0 Maincontrol ® Connectingthe © Powerboard a NTctemperature
circuit board flat cable
sensor
OMagnetic switch
OBuzzer
OHeatingcoil ®ThermalFuse
Wiring diagram of circuit board
CO
rl
® LO
__or©
iiE
L|©
=p ©rm=Jm
1I I
[g]ill
CjCj
…_.._.”.’.. © ….- .©-.. —. .
1.Output zero line 2.Input zero line 3.Input live line 4,Output live line 5.Temperature probe
6. Sensor switch 7.Button 8.Display 9.Motor10.Motor+
The products are strictly based on the Consumer Protection Law of the People’s
Republicof China and the Product Quality Law of the People’s Republic of
China. The services are as follows: Within 12 monthsthis product has the
performance failure listed in theproduct Performance Failure Table”. It is
confirmed by manufacturer and can be used for maintenance service free of
charge.If out of validity, damage caused by force maieure,or human causes,the
machine is not covered by the warranty,repair in charae.
Safety instruction
Before operating this unit,please read these instructions completely and save
them. Notice: 1.Keep unplug when moving the machine. 2.Keep unplug when
installing accessories. 3.Place on a flat and stable platform and operate
under ventilated conditions. 4.Wear special protective equipment when
operating the machine
Warning
lmproperuse may result in electric shock,fire,personal injury and other damage.
1.Do not use this machine in ahazardouslocation.
2.Do not use when the machine is not working properly.
3.Do not allow children or adults who do not understand this manual to operate this
machine. 4.Do not disassemble and repair this machine. 5.Do not use an unsuitableAC outlet.
41
6.Do nottouch the heating plate when the machine heating
Warning
Basic parameters
Productname: Electric high pressure heat press machine Model: F380 Heating
method: Heating coil Rated voltage/frequency: 220-240V~50Hz 930W
Ratedvoltage/frequency: 120V~60Hz 750W Heating plate size: 290mmx380mm
Temperature range:40°C-205°C(|04°F-401°F) Time range: 1-999s
Netweight:15.1kg Grossweight:17.1kg Outerboxsize: 575480280mm Outer box
volume: 0 . 077 cube
Warranty
Type Whole machine Accessories
Items Parts of machine (excl. accessories) List the accessories
Period 1 year Not covered
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>