GiSE CAFFE CA0002 Coffee Maker Instruction Manual

ATENA – CA0002
Instruction Manual

Safety Precautions

These important safety precautions are critical part of the appliance. Please read them all carefully before using the appliance for the first time. You may keep the instructions for future reference or pass it to other users.
The appliance is designed for domestic use and may only be operated in accordance with these instructions for use.
Always handle with care and warn other users of the potential danger.
The Appliance sound pressure is below 70 dB.
DANGER: Misuse of the appliance can cause injury
DO’s

1. Check the mains voltage stated on the rating plate corresponds to the local electricity supply.

2. Unwind and straighten the power cord before using the appliance.

3. Place the appliance on a firm and steady surface.

4. The appliance must be used and rested on a stable surface.

5. Disconnect the appliance from mains supply outlet under the following conditions:
   a. Before the water tank is filled with water
   b. Before removing any parts from the appliance or refit any parts on the appliance.
   c. Before cleaning or maintenance
   d. When the appliance is not working correctly
   e. After using the appliance

6. Empty the water tank, when the appliance unused for a long period

7. Allow to cool before putting on or taking off parts, and before cleaning the appliance.

8. Always use cold water to make coffee. Warm water or other liquids could cause damage to the coffee maker.

9. If the power cord is damaged, it must be replaced by the manufacturer or its service agent or similarly qualified person in order to avoid any hazard.

10. Use the grinder for grinding coffee beans only.

11. Children shall not be playing with the appliance.

12. This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.

13. Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.

14. Appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction by a person concerning use of the appliance in a safe way and understand the hazards involved.

15. This appliance is designed for household use only.

16. In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

17. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards . Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.

18. The appliance must be used at ambient temperatures of +10°c to +40°c.

DO NOT’s

1. Do not allow children to touch the appliance or the power cord during the operation
2. Do not use an extension power cord set unless competent authority has approved it.
3. Do not leave the appliance unattended, when it is connected to main supply.
4. Do not use the appliance in outdoor environments.
5. Do not use appliance for other than intended use.
6. Do not let cord hang over the edge of table or counter or touch hot surface.
7. Do not use or place the appliance on a wet or hot surface.
8. Do not use the appliance if the drip tray is improperly placed in position.
9. Do not immerse the appliance in water or any liquids.
10. Do not use the appliance when any parts of the appliance are damaged.
11. Do not use the appliance when it is not working properly.
12. Do not unplug the appliance by pulling the power cord.
13. Do not place the cord on a sharp edge of an item.
14. Do not attempt to open the main body or dismantle any parts from the appliance, there is no serviceable part inside.
15. The appliances normally cleaned after use and not intended to be immersed in water for cleaning and the appliance must not be immersed.
16. The use of accessories not included in the box is not recommended. It might be dangerous and should be avoided.
17. Do not place the appliance on or near hot gas or electric burner, or in heated oven.
18. Do not operate the hot water function continuously for more than one tank of water.
19. Do not be placed in a cabinet when in use.

For electrical products sold within the European Community. At the end of the electrical product useful life, it should not be disposed of with household waste. Please recycle here facilities exist. Check with your Local Authority or retailer for recycling advice in your country.

MACHINE OVERVIEW

GENERAL DESCRIPTION

CONTROL PANEL & ON/OFF BUTTON

| Flashing: Low water level/ Water tank missing
---|---
| Lack of beans
| Lights up stably: coffee grounds container is full
Flashing: Internal Drip Tray/coffee grounds container is missing
| Lights up stably: Brewer is missing/ installed improperly
Flashing: Service door is opened / installed improperly
| Lights up stably: Requires to do descaling
Flashing: Descaling is under process
| Empty System Function is running
| Power ON/OFF Button
| Strong coffee Button
| Mild coffee Button
| American Coffee Button
| Favorite Coffee Button
| Hot Water Button

ACCESSORY
In the box, three packs of cleaning agents are included for the process of Descaling.

MACHINE INSTALLATION

7. Remove any protective films, stickers and any other packing material on the appliance.|
---|---
8. Choose a safe and stable surface with an easily reachable power supply and allow minimum distance from the sides of the machine.|
9. Insert the external drip tray. Make sure it is inserted correctly.|
10. Fill the water tank with water (see “FILLING THE WATER TANK”).|
11. Fill the bean box with coffee beans (see “FILLING THE COFFEE BEAN CONATINER”).|
12. Unwind and straighten the power cord and insert the plug into the socket located on the back of the machine. Insert the other end of the power cord into a wall socket with suitable power voltage.|

NOTES : Press Hot Water button (see “Manual Rinsing”) to clean inside of the coffee machine before the first use.

Daily Operations

FILLING THE WATER TANK

1. When is flashing, the water tank is in low water level and requires filling the water tank.
2. Lift the water tank by using the lid as the handle.
3. Rinse the water tank with fresh water. Fill the tank to the Max level and place it back into the machine. Make sure it is fully inserted.
   Note: To prevent overflowing the water tank, do not add water directly into the appliance. IMPORTANT : Never fill the water tank with warm, hot, sparkling water or any other liquids which might damage the water tank and the machine.

FILLING THE BEAN CONTAINER

1. When is flashing, the appliance needs to be filled with coffee beans:
2. Remove the bean container lid.
3. Fill the bean box with coffee beans.
4. Install the container lid.

IMPORTANT : Fill the bean container with coffee beans only. Grounded, instant, caramelized coffee or other objects may damage the machine.

MAKING YOUR COFFEE

1. Switch on the appliance by pressing the Power on/off button . Make sure the drip tray under the coffee spout and water tank with water inside. The appliance will perform self-rinsing for a small cup of water, you can stop it by pressing Hot Water Button. The appliance is then in the standby condition.

2. Place a cup under the coffee spout and adjust the height of the spout to fit the cup.
   Depending on the cup size (too tall or too wide), the drip tray can be removed or adjusted the position as below:

3. Choose your coffee flavor by pressing strong coffee or mild coffee button.

4. The coffee button being pressed will light on and the illuminations will light up indicating that the appliance is preparing the cup of coffee. You can stop dispersing coffee by pressing the button again.

5. When the appliance is back to standby condition, the coffee is ready to serve.
   Tip : The strong coffee button with higher coffee intensity is recommended for espresso, while both coffee button volumes can be adjusted (see “ADJUSTING COFFEE/HOT WATER VOLUME”).
   Notes : Press the hot water button to clean inside of the coffee maker before first use.

PREPARING AMERICAN COFFEE

1. Put a cup under the spout.
2. Press American button . Both Americano button and illumination will light up indicating the appliance is preparing the cup of Americano. The coffee will be dispensed first and then hot water.
3. Preparation will stop automatically. If you want to stop dispensing coffee during operation, press the button again.

PREPARING HOT WATER

1. Put a cup under the spout.
2. Press Hot Water button . Both hot water button and indicator light up indicating the appliance is heating up water.
3. Preparation will stop automatically. If you want to stop hot water during operation, press the button again.

FAVORITE FUNCTION SETTING

You can use the favorite function to memorize your desired volume of strong coffee, mild coffee and Americano.
To set up the Favorite button:

1. Put a cup under the spout.
2. Press and hold the Favorite button for 2 seconds. The strong coffee, mild coffee and Americano buttons will flash. Press your choice of favorite coffee.
3. The corresponding drink will be dispensed. Press and hold again to keep dispensing and release the button to stop it. Two beeps will sound and volume will be memorized at this stage.

To use the Favorite button:

1. Put a cup under the spout.
2. Press the Favorite button . The memorized favorite drink will be dispensed.

DAILY CLEANING OF THE APPLIANCE

Timely cleaning and maintenance of the appliance is very important in prolonging the life of the appliance.
Cleaning Drip Tray and Coffee Grounds Container Empty and clean the drip tray every day.

1. Pull the external drip tray out of the machine. Empty the water left in drip tray and rinse with fresh water. Dry it afterwards.
2. Slides open internal drip tray and coffee ground container. Empty the coffee ground container and rinse with fresh water. Dry it afterwards.
3. Put back the coffee grounds container in internal drip tray.
4. Secure the external drip tray at its original position.

NOTE:

When lights up, the coffee ground container needs to be emptied.
When is flashing, the coffee ground container is missing.

Cleaning Brewer

1. Slightly press the bottom of service door to open it.
2. Take out the service door from machine.
3. Press the release knob on brewer and take out. Rinse it under tap.
4. Insert the brewer back to its original position. Put the service door on the machine.

NOTE:
When lights up stably, it indicates that the brewer is missing / installed improperly.
When is flashing, it indicates that the service door is missing / installed improperly.

Cleaning Water Tank

1. Lift the water tank out of the machine and rinse with fresh water.
2. Fill it with drinkable water up to the Max level. Put it back in the machine.

Turning Off the machine
Switch off the appliance by pressing the Power on/off button.
Automatic Shut-off
The Appliance is equipped with auto shut-off. Depending on the mode you have selected the
appliance will have different auto-shut off timing (see “MODE SELECTION”).

FURTHER SETTING

ADJUSTIING COFFEE/HOT WATER VOLUME
The machine can memorize your desired volume of strong coffee, mild coffee, Americano and hot water.

1. When making your coffee (strong coffee, mild coffee or Americano) or dispensing hot water, press and hold the button you selected. The appliance will continue to make the cup of coffee or hot water.
2. When the volume of coffee or hot water meets your desired volume, release the button. Two beep sounds indicates the volume of drink is being memorized.

GRINDING ADJUSTMENT

You can adjust the grinder to choose different coffee roast levels by turning adjuster knob in the bean container. The dots on adjuster knob indicate the fineness of grind.
When the grinder is grinding the coffee bean, you can turn the adjuster knob to change the fineness.

WARNING: Never do the grinding adjustment when the grinder is not operating. It may damage the grinder.
MODE SELECTION
The machine has three different settings: default setting, ECO mode and speed mode. In ECO mode, the appliance helps to save more energy. In speed mode, the user can make their coffee faster than in default setting.

| Speed ​​Mode| Default Setting| ECO Mode
---|---|---|---
Illumination Light| Yes| Yes| No
Pre-brewing| No| Yes| Yes
Auto shut off time| 30mins| 20mins| 10mins
Cup Volume memory| Yes| Yes| Yes

• Note : The pre-brewing function moistens the grounded beans in the brewer with a small amount of water before full extraction. This expands the coffee grounds to build up a greater pressure in the brewer which help extraction of all the oils and full flavor from the grounded beans.

  1. When the machine is in standby condition, press and hold the for 5 seconds.

  2. The will be flashing. Buttons will show following indications under different settings:
     | Hot water button| Strong coffee button| Mild coffee button
     ---|---|---|---
     In ECO Mode| Light ON| Flashing| Flashing
     In Speed ​​Mode| Flashing| Light ON| Flashing
     In Default Setting| Flashing| Flashing| Light On

  3.  Press the hot water button for ECO mode, strong coffee button for speed mode and mild coffee button for default setting. Two Beep sounds indicates that the mode is being selected.
     Note: If you are pressing the relative Light ON button in each mode, the machine will not respond.

  4. If you would like to remain the setting unchanged, press again or wait for 5 seconds for the machine to return to the standby condition.

CLEANING & MAINTENANCE

YOU. DESCALING

When lights up stably, it indicates that the appliance needs to undergo descaling. The appliance will remain in the best condition if this function is performed at least once a month or more regularly depending on the hardness of water used.

1. Fill the water tank to MAX level.

2. Add one pack of cleaning agent into the water tank.
   IMPORTANT : Do not use vinegar or other cleaning agents to do descaling of this appliance.
   The cleaning agent might damage the appliance.

3. Plug in the appliance.

4. Place a sufficient large container under the coffee spout.

5. In standby condition, press and hold Power ON/OFF and Strong Coffee button for 5 seconds. A beep sound will be heard with and Strong Coffee button will be flashing.

6. Press Strong Coffee button to confirm to undergo descaling process. To resume back to the standby condition, press .

7. will be flashing indicating that the appliance is undergoing descaling process.
   WARNING: Keep skin/body away from the hot water.

8. When all water in the water tank is being dispensed out, and Strong Coffee button will be flashing. Remove the remaining solution in water tank and fill the tank with tap water to MAX level. When water tank is filled up, it will go off. The appliance will continue the descaling process.

9. When descaling process is completed, the appliance will switch off automatically.
   NOTE: To ensure the descaling process can be completed, please be patient during the operation.

EMPTY SYSTEM FUNCTION

The empty system function is recommended before storing, for frost protection or before taking to repair agent.

1. In standby condition, press and hold the and mild coffee button together for 5 seconds.
2. will then be flashing.
3. Remove the water tank from the appliance. will light up stably indicating that the empty system is under process. The coffee spout will dispense a small amount of water. You can press before removing the water tank to resume back to the standby condition.
4. When the empty system function is completed, the appliance will switch off automatically.
   IMPORTANT : After performing Empty System Function, press the Hot Water button until water dispenses from spout when the machine is used again.

MANUAL RINSING
You can perform a manual rinsing cycle to clean the coffee nozzle after use, or after the appliance has not been used for a long period of time.

1. In standby condition, press and hold the and hot water button for 5 seconds.

2. Hot water button will be flashing. The coffee nozzle will then dispense a small amount of water which is used for the rinsing.
   WARNING : Hot water will be dispensed from coffee spout into external drip tray. Avoid contact with splashes of water.

3. After rinsing, the appliance will return to the standby condition.

CLEANING THE APPLIACNE

1. Disconnect the power cord from the mains supply outlet.
2. Pour away all water in both the internal and external drip trays.
3. Use a damped cloth or non-scratching cleaner to clean the water stains on the appliance.
   IMPORTANT: Never use any abrasive, vinegar or descaling agents not included in the box to clean the appliance.

CLEANING COFFEE POWDER OUTLET
Coffee powder may stick on the wall of powder outlet for appliance after used a long period of time. It is suggested to clean the outlet by following steps to ensure that coffee powder can deliver to the brewer.

8. Push the recess area of ​​service door.|
---|---
9. Take out the service door.|
10. Press the release knob of brewer.|
11. Remove the brewer.|
 12. Rinse the brewer under running water. Let it dry completely before reassembling on the machine.|
13. Use cleaning brush to clean the powder outlet and remove any coffee grounds or powder residues from the machine.|
14. Use a cloth to clean inside of the machine thoroughly. Dry completely before closing the side door.|

TROUBLESHOOTING

-Check the cable and the Plug
No or delayed response in several trials of pressing on function key on the panel.| – Appliance is under an electromagnetic interference.
– Dirt over the panel.
– The cups have not been| – Unplug the appliance.
Restart after a few minutes Clean the panel with the provided.
cloth . Rinse liance at least 3 our et
The coffee is not hot enough.| preheated.
– The brewing unit is too cold.| the app times before making the coffee.
The coffee cannot come out from spout.| Empty system function maybe used before.| Press the hot water button until water can come out from spout.
The first cup of coffee is poor quality.| The first run of grinder does not pour sufficient quantity coffee power into the brewing unit.| Throw the coffee away. The other coffees will always be of good quality.
Coffee has no cream.| Coffee bean is not fresh.| Change or using appropriate brand of coffee bean.
The touch buttons are not sensitive.| Not pressing the touch button from the front direction of the appliance.| Press the lower bottom part of the icon of the touch button from the front direction of the appliance.
The appliance takes too long time to warm up.| Excessive scale has built up.| Descale the appliance.
The water tank is removed / the water level is very low in the water tank but have no alert.| The area near the water tank connector is wet.| Wipe the water around the water tank connector
Internal drip tray is filled with a lot of water.| Coffee powder too fine which blocks the water to come out.| Adjust the coffee fineness to bigger dot during grinder operation.
Coffee is delivered too slowly or a drop at a time.| Coffee powder too fine which blocks the water to come out.| Adjust the coffee fineness to bigger dot during grinder operation.
Lack of bean indicator flashes but there is still a lot of coffee beans inside the container.| Internal coffee powder outlet is blocked.| To follow the steps of in “Cleaning coffee powder outlet”.
keep flashing even perform descaling process.| The process not completed.| To follow the steps of “Descaling” and make sure the appliance switches off automatically.

GENERAL WARRANTY TERMS AND CONDITIONS

Thank you for purchasing this product and for your trust in our company. This product is covered by a warranty that complies with all legal regulations concerning the guarantee of consumer goods and consumer rights in force in the country where the product was purchased. If your product does not conform to the sales description, has defects or malfunctions, is not suitable for its intended purpose, or does not exhibit the promised quality and performance, you may contact the product retailer or contact our Customer Service directly on our number: +39 0534 688911. In this regard, you can find more details on www.gisecaffe.com. Please read the instruction manual supplied with the product carefully before contacting the abovementioned parties. The product’s warranty becomes void if it is misused, not used as indicated in the instruction manual, and/or in the following cases:

• Incorrectly performed installation and/or maintenance
• Lack of maintenance (as stipulated in the instruction manual)
• Missed and/or incorrect descaling (as per instruction manual)
• Damage and/or obstructions caused by limestone accumulations
• Repair, modification and/or tampering by unauthorized personnel
• Use of non-original spare parts
• Lack of proof of purchase
• Causes not attributable to faults or defects in the manufacture

The product warranty does not cover normal wear and tear due to use, routine maintenance as indicated in the instruction manual and damage caused by external agents not attributable to the manufacturer. The company cannot, in any way, be held liable for any commercial and/or image damage, nor for damage to property and persons caused by improper connection and/or use of the product.

GISE Caffè Srl
Loc. Fontanaccia 292,
40041 Gaggio Montano (BO) – Italy
Phone: +39 0534 688911
Mail: info@gisecaffe.com
www.gisecaffe.com

https://www.gisecaffe.com/
Scan the QR-CODE to visit
our website
Scan the QR-CODE to visit our website
consumer service
Number
+39 0534 688911

References

• Gise Caffè - Una ventata di novità nel mondo del caffè

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>