Collective Minds Gaming Co Ltd CM00150 Xbox Strike Pack Horizon Instruction Manual
- June 1, 2024
- Collective Minds Gaming Co Ltd
Table of Contents
Minds Gaming Co Ltd CM00150 Xbox Strike Pack Horizon
Instruction Manual
NOTE: THIS MANUAL HAS BEEN REVISED WITH INSTRUCTIONS THAT ARE VALID ONCE THE STRIKEPACK HORIZON™ HAS BEEN UPDATED.
INTRODUCTION
Thank you for purchasing the STRIKEPACK HORIZON ™ for the Xbox Series X|S® and
Xbox One® consoles. The STRIKEPACK HORIZON™ is an app-powered wired controller
adapter that adds advanced gaming functionality to your existing standard
Xbox® controller. The adapter upgrades your controller with 4 Paddles and
provides access to M.0.D.s (Macros On Demand) via the STRIKEPACK™ Central
smartphone app for iOS 15.0 and Android 9.0, or later, all without any
permanent modification or voiding of your warranty. Simply attach the adapter
to your controller, plug in the 10ft cable, and get ready to experience
lightning reaction times and unlimited control.
Pair to the app for thousands of M.O.D. combinations and advanced
configuration. Rapid Fire, Anti-Recoil, Turbo, Button Record & Playback, and
much more. The STRIKEPACK HORIZON ™ is the future of STRIKEPACK™, and our
whole team at Collective Minds is excited to bring that future to you.
We have spent countless hours, and sleepless nights, pushing the device
through extreme game sessions, ensuring any bugs andissues have been
eradicated. However, if you find any issues or have any difficulty operating
the device, please reach out to us at
[email protected] and we will be
more than happy to help you out.
Also, there are plenty of videos to help you setup and maximize your fun over
at www.collectiveminds.ca and our YouTube
support channel – feel free to check them out along with our other Collective
Minds products!
KIT INCLUDES
STRIKEPACK HORIZON ™ device with 4 Paddles.
10FT Connection Cable.
USB Adapter for Xbox® controller (USB-C)
USB Adapter for Xbox One® controller (Micro USB)
8. The STRIKEPACK HORIZON™ is an app-powered device, but without the app, you
can still use Tournament Mode, map the paddles, and factory reset the device.
The STRIKEPACK™ Central smartphone app is required to access GAMEPACK M.0O.D.s
(Macros On Demand) and advanced configuration features, such as calibration.
The app can be downloaded from iOS and Google Play stores, and it requires a
minimum of at least iOS 15.0 or Android 9.0, or later.
9. Turn on your smartphone’s Bluetooth, then upon launching STRIKEPACK™
Central, it will find your STRIKEPACK HORIZON™ device serial and ask to
connect. Accept the connection to connect to the app.
MAPPING MODE
Paddle Mapping is a very simple process that can be done using the controller.
To enter Mapping Mode, HOLD either one of the Mapping Mode Buttons until the
Gear Head Eyes and RGB LED indicators tum PURPLE.
From here, while HOLDING a controller button, TAP the Paddle that you wish to
map the button to. You can HOLD up to 4 controller buttons to be mapped to a
single Paddle.
If you TAP a Paddle while NO controller buttons are held, it will clear the
Paddle of any current mapping.
To exit Mapping Mode, TAP either one of the Mapping Mode Buttons.
NOTE: STRIKEPACK HORIZON™ can store different Paddle maps between
Tournament, and GAMEPACK profiles. Paddle mapping can also be accessed on the
app.
UPDATER MODE
If you want to be able to update the STRIKEPACK HORIZON™ without having to remove it from your controller each time, use the following method: HOLD Paddles 1 & 3 together while you are connecting the cable of the STRIKEPACK™ to the USB port of your Windows 10 or higher PC. The STRIKEPACK™ should be successfully detected in the Universal Updater Tool.
HARD FACTORY RESET
If you need to return the STRIKEPACK HORIZON ™ to the factory settings for its
current firmware, this can easily be performed. This can quite often resolve
seemingly unresolvable issues, especially after a firmware update or when you
have made several changes and updates to the device over time.
HOLD BOTH Mapping Mode Buttons together while you are connecting the cable of
the STRIKEPACK™ to the USB port of your Xbox® console or PC. Keep the Mapping
Mode Buttons HELD until you see HOT PINK Gear Head Eyes and RGB LED indicators
to confirm the reset has been completed.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
elevision reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
IC WARNING
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
The device has been evaluated to meet general IC RF exposure requirement.
The device can be used in portable exposure condition without restriction.