BUFFBEE RS11 Small Alarm Clock Radio for Bedrooms-User Manual

BUFFBEE RS11 Small Alarm Clock Radio for Bedroom

Features

• FM Radio
• 7 Colorful Night Light
• 12/24H Mode
• 9 Minutes Snooze
•  0-100% of the Display Dimmer
• 0-16 Level Adjustable Volume
• Sleep Timer
• Battery Backup (Only Memory Function)

Power Specifications

AC100-240V, 50/60Hz. Output: 5V/1A

Front View

Top View

Back View

Bottom View

Getting Started

1. Plug the adaptor into a standard household outlet, and you will see 12:00 on the display and the clock is ready to be set.
2. Please remove the battery tab before use.

Notice:

• If the display is “blank” after plugging in, please check whether the DISPLAY DIMMER on the back is at the HIGH position.
• Under the battery power, the display will go blank and the preset alarm will not go off. Battery backup is for saving TIME and ALARM settings only.
• Please extend the FM antenna on the back of the clock.
• If you press any button, all the buttons will light up and then turn off automatically after 5 seconds.

Time Setting

1. Press the “” button to enter the HOUR setting. The HOUR digits will flash on the display. Press “ ” or “” button to advance to the correct hour.
2. Press the “” button to confirm and enter MINUTE setting. When the MINUTE digits flash, press “” or “” button to advance to the correct minute.
3. Press the “” button to confirm and enter time format (12/24H) setting. Press “” or “” button to select time format. When using the 12-hour time format, AM/PM icon will appear on the display to suggest morning/afternoon time.
4. Press the “” button to confirm and exit the time setting mode.
   Notice：
   The clock will exit automatically from the TIME setup mode if no action is taken within 5 seconds. (Action refers to pressing the desired button for setup)

Alarm Setting

1. Press the “ ” button to enter ALARM HOUR setting. The HOUR digits will flash on the display. Press the “” or “” buttons to advance to the desired hour.
2. Press the “” button to confirm and enter ALARM MINUTE setting. The MINUTE digits will flash on the display. Press the “” or “” buttons to advance to the desired minute.
3. Press the “” button to confirm and enter WAKE UP SOUND setting. The icon of alarm will flash on the display. Press the “” or “” buttons to choose from Bird chirping sound, Piano sound, Beep sound or FM radio which is the last tuned in radio station or the station you set in WAKE UP RADIO ALARM (Page 13).
4. Press the “” ALARM button to confirm and exit the alarm setting mode.
   Notice：
   The clock will exit automatically from the ALARM setup mode if no action is taken within 10 seconds. (Action refers to pressing the desired button for setup)

Alarm Volume Setting

When radio is OFF, press the “” or “” buttons to select the volume level. (0-16 adjustable) A number will be shown on the display.

Alarm Pause & Snooze

When the alarm goes off, you have two options:

1. Press “” button to stop the alarm when it’s ringing. The alarm will go off the next day.
2. Press “ ” button to snooze, and the indicator “” will flash on the display. The alarm will go off again 9 minutes later.

Alarm On/Off

1. Press the “” button to turn on the alarm.
2. Press and hold the “” button for 2 seconds to completely turn off the alarm and the indicator “” will disappear from the display. The alarm will NOT go off the next day.

Nightlight Setting

1. Press the “” button to turn on the nightlight. Then press the “” button to change the color of the night light.
2. Press and hold the “” button for 2 seconds, the night light will be turned off.

FM Radio Setting

Please extend the FM antenna on the back of the clock.

1. Press the “” button, FM radio will be ON/OFF.
2. Press and hold “ ” button for 2s, and FM radio will scan and auto-store the scanned stations. Once the station search is completed, the first station will be played automatically. Press the “” or “” buttons to tune from auto-store stations.
3. Use the “” or “ ” buttons to adjust the volume of the FM radio. 0-16 level adjustable.

Wake Up Radio Alarm Setting

When the radio is on, press the “” or “ ” button to tune the radio stations you like, then press and hold “ ” button until the icon “AL” appears on the display screen. The clock immediately saves this station as Wake Up Radio Alarm Sound.

Sleep Timer

You can use a sleep timer to turn off the nightlight and radio automatically when the preset sleep timer comes.

1. Press repeatedly the “ ” button to select the sleep timer ranging from OFF, 15, 30, 60, 90, to 120 minutes. The sleep timer will be seen on display.
2.  To turn off the sleep timer, press “” button to select “OFF” and wait for 3 seconds for it to work, or hold the “” button for 2 seconds to turn it off directly.
3. When the sleep timer is on, press “” button to see if the sleep timer remained.

Brightness Setting

Slide the DISPLAY DIMMER slider at the back of the clock to adjust the display brightness. (It can be adjusted from 0 to 100%)

Battery Operated Setting

Install 1* CR2032 battery into Battery Compartment. (Battery is built in already).
Notice: Battery backup is for saving TIME and ALARM settings only.

Support

The radio alarm clock comes with one year warranty. If you have any issues with this radio alarm clock, please contact us at Contact@buffhomes.com. We will address your issue within 24 hours.

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to protect reasonably against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Thank you for purchasing on BUFFBEE！Please read these instructions carefully and keep the user manual in a safe place for future reference.

Instructional Video

Please scan the QR code here to access the instructional video of this product.

FAQs

Will there be white noise all night long or just for 0–120 minutes?

The white noise, which to me sounds like birds chirping, is probably what I have mistaken for an alarm. I like that sound versus a loud buzz for waking up. I don’t know the answer to your inquiry because I stopped it shortly after the alarm went off. However, I adore the clock.

Will it hold many radio stations?****

Radio stations are automatically stored. Holding down the radio button causes it to scan and automatically save the scanned stations when you first connect it in. Then, to switch between stations, you hit the arrow keys. As a result, you cannot choose your own stations. Because it only stores 30 stations, it could only reach bandwidth 100.3 in Chicago, where I currently reside, before the auto store stations were completely utilised. From there, all you have to do is keep pressing the arrow keys to move up. For those reasons, I would suggest that this is not a wonderful gadget for radio enthusiasts.

Can radio stations be pre-set?****

I haven’t tried because the radio is useless to me, but I think you can as it scans stations that are available. I’M ONLY INTERESTED IN THE WHITE NOISE & TIME OPTIONS. AWESOME TO ARRIVE TO SOME Beautiful birds singing instead of some strange buzzer

Does the alarm/clock radio have a snooze feature?****

Yes! There is a 9-minute snooze option. For the price, this is a really great tiny block radio.

Can you adjust it to only play one alarm sound, or does it cycle through all four as shown in the advertisement?****

It seems to be one sound at a time, from what I can tell. Even with the instructions, programming may be somewhat tedious. The snooze button is also very small. To push the snooze button, you must carefully consider what you’re doing. You’re already wide awake at that point.

How do alarm clock radios work?****

An alarm clock and radio receiver are combined in a clock radio. The clock often has a buzzer alarm and can be set to turn on the radio at a specific time to wake the user. Clock radios are typically kept on the nightstand.

What is the easiest alarm clock to use?****

The DreamSky is a basic, dependable, and highly readable alarm clock that is simple to use and free of extraneous bells and whistles. It will help you get out of bed in the morning with a loud beep that isn’t too alarming.

Are radio clocks safe?****

As a result, it has no impact on a person’s physique. A radio-controlled watch or clock can be used without risk by those who have a pacemaker or other medical equipment. Radio-controlled watches and clocks are safe to use anyplace, including hospitals, just like regular watches and clocks. the goods of the Japan Clock & Watch Association.

What color alarm clock display is best for sleeping?****

Naturally, getting up in the middle of the night isn’t ideal in any case, but red light will be better for your eyes than blue or green. Our retinas include specialised photosensitive cells called ipRGCs, which power our bodies’ internal clock.

What’s a clock radio?****

A clock-radio combination that allows the user to programme the radio to start at a specific time using the clock

Is a clock radio an appliance?****

A clock radio is frequently one of those inconspicuous home appliances that go unnoticed until they stop functioning. Investing in a high-quality clock radio with an alarm feature can mean the difference between sticking to a routine and experiencing the effects of oversleeping.

How much power does a radio use?****

Some listeners may have clearer reception as a result, however an Energy Saving Trust analysis from two years ago (pdf) states that “conventional analogue radios have an average on-power usage of two watts, but digital radios consume, on average, more than four times this amount” (8.5 watts).

What type of energy does an alarm clock use?****

A commonplace item that transforms energy types are bulbs. An oven transforms electrical energy into heat energy, a toaster transforms electrical into heat energy, and an alarm clock transforms electrical energy into light and sound.

How does an alarm clock transfer energy?****

An alarm clock is the only thing that can transmit energy through sound. When an alarm clock is programmed to wake someone up at a specific time, it is powered by electricity and then emits a sound. The soundwaves are a result of air vibrations.

What energy transformation is radio?****

The electrical energy that goes into producing sound on a radio is converted into both mechanical and acoustic energy. Since sound is produced by molecules vibrating, sound energy is mechanical energy.

Video

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>