Corsano BP Cuff Device User Guide

Corsano BP Cuff Device

Product Information

Specifications:

• Device: Corsano BP cuff
• Compatibility: Corsano App
• Measurement Type: Blood Pressure
• Measurement Method: Non-Invasive

Product Usage Instructions

Adding Corsano BP Cuff Device to Corsano App:

1. Press the right top corner to go to Settings.
2. Select BP Cuff.
3. Press “Start Pairing”.
4. Do not press the Start button on the Cuff monitor.
5. Follow the instructions. Press Cancel to abort the pairing process and try again.
6. Once paired successfully, visually verify the identifier number on the Cuff monitor.

Performing a BP Cuff Measurement – Instructions:

1. Press “Start BP Measurement” from the Dashboard.
2. Tick the box if you take medication to lower Blood Pressure.
3. Adjust the tightness of the bracelet as per instructions.
4. Position the bracelet correctly following the guidance.
5. Prepare for the Blood Pressure Cuff measurement by sitting and following instructions.
6. Rest your arm on a table at heart level, ensuring cuff tightness.
7. Sit still, relax, and follow further instructions for measurement.

Performing a BP Cuff Measurement – Measurement:

1. Press the “START” button on the Cuff monitor to initiate measurement.
2. Wait for the measurement to complete (around 30 seconds).
3. Repeat the measurement two more times for accuracy.
4. The Non-Invasive Blood Pressure is calibrated after the third measurement, with results available in the APP.

FAQ

• Potential Messages related to BP measurements:
  Follow instructions on the app. Perform BP cuff initial measurements at three different times of the day (morning, midday, evening) and wear the bracelet consecutively for 48 hours to start receiving continuous BP measurements.

• Potential Error Messages from the App:

NIBP – Pair a BP cuff device

Add a Corsano BP cuff device to the Corsano App

1. Press   right top corner to go to Settings

2. Select BP Cuff

3. Press [Start Pairing]
   Don’t press the Start button of the Cuff monitor

4. Follow instructions. Press “Cancel” to abort the pairing process and try again.

5. BP cuff pairing success.
   Make sure this is your device by visually checking the identifier number on the Cuff monitor.

NIBP – BP cuff measurement

Follow these steps to perform a BP cuff measurement – Instructions

1. Press [Start BP Measurement] from the Dashboard
2. Tick the box if you take medication to lower Blood Pressure.
3. Follow the instructions to properly adjust the tightness of the bracelet.
4. Follow the instructions to properly adjust the position of the bracelet.
5. Prepare for the Blood Pressure Cuff measurement. Sit and follow the instructions.
6. Rest your arm on a table at the same level as your heart.
7. Check the tightness of the Cuff. Sit still, don’t move and relax.

NIBP – BP cuff measurement
Follow these steps to perform a BP cuff measurement – Measurement

1. Press the [START] button on the Cuff monitor.
   The Cuff will inflate and measure your Blood Pressure. Wait for the measurement to finish. This takes about 30s.

2. After completion of the third measurement, the Non-Invasive Blood Pressure is calibrated. The result of the calibration is available in the APP.

NIBP – Messages

Potential Messages related to BP measurements

• Follow instructions on the app.
  You have to perform BP cuff in it measurement at 3 different times of the day (morning, midday, evening) and wear the bracelet 48h consecutively to start getting continuous BP measurements

• Potential error messages from the app.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>