EASYCOUNT SHP6 Smart Heat Press Machine User Manual
- June 1, 2024
- EASYCOUNT
Table of Contents
Smart Heat Press Machine
User Manual
Model:SHP6
• Packing size: 29cm17cm15.1 cm
• Power: 300W or 500W
Please read carefully before use
Made in China
Get to know your Smart Heat HP6
1. Power Button
2. Temperature Button
3. Time Button
4. Start Button
5. Temperature| 6. Bluetooth’
7. Time
8. Heat Plate
CAUTION: Gets very hot during use
9. Safety Base
---|---
INDICATOR LIGHTS
Stand by
Activation mode
Machine on
Heating up
Ready to use
use your smart heat press
Before first use, heat press will be in activation mode, download Smart Heat™
app to activate.
Once connected, send precise settings & get step-by-step instructions for
every project from your mobile device.
For best results
- Always press on a sturdy, stable foundation
- Avoid pressing on heat-sensitive surfaces
- Protect your surface with Cricut pressing mat or thick bath towel
- Avoid seams, buttons, zippers & bumps
- For detailed instructions, follow on-screen app prompts
- For detailed instructions, follow on-screen app prompts
Manual control
- Press Power Button (1) to turn on/heat-up
- To set temperature, press Temperature Button (2), use +/- to adjust
- To set time, press Time Button (4), useX+/- to adjust
- To start countdown, press Start Button (7), beep signals time is up
- Press Power Button (1) to turn off
- Auto-off after 13 minutes of inactivity
CAUTION: Heat plate (8) gets very hot during use. Always return to safety base when not in use.
Glance Features
LCD Screen Digital Controls
Clear display, easy to set temp and time.
Time: 0-600s
Fahrenheit / Celsius Option
Press and hold the key to convert between Fahrenheit and Celsius.
Temp: 210-400 F/100-205’C
Ergonomic Handle
Counterbalanced, back that mass up, ensure your smooth operation.
Evenly Heated Plate
Highly durable aluminum alloy, provide flawless transfers.
Insulated Antislip Base
Not only a placement to settle the machine also prevent your workbench away
from scorch.
Fireproof Design
Made with premium fire retardant ABS&PA.
Auto shutoff & Overheat protect
The machine shuts off automatically after 10 mins without operation.
Over heat protector is installed.
Operation Guide
A. Setting: Plugin and switch on. Set the temperature and time according to
different base materials and iron-on type.
B. Get prepared: Made your workbench flat and stable. Use a heat-proof mat or
a folded fluffy towel to protect your workbench surface.
C. Preheat the base material: Place your base material on the mat/towel for 5
seconds to remove wrinkles and moisture.
D. Position and press: Place your design wherever you want on the base
material, place the machine on the design. Start the timer. Apply pressure
until the machine beeps.
E. Flip and repeat: Flip the base material and apply heat on the backside of
the design for 15 seconds.
• If the transfer paper or heat transfer vinyl doesn’t lift easily, reapply
and reheat a few more seconds.
F. Peel to finish: Peel off transfer paper or HTV ( Please make sure transfers
are warm peel or cold peel ).
NOTE Please switch off the machine and unplug the power cord when the
machine is not in use.
It may be easy, but it’s also HOT. Handle with care.
- Different goods will require different temperature and time settings because of different materials or thicknesses. Please use flat materials for transfer. Curved materials cannot be transferred.
- Please keep children away when using the transfer machine.
- Please do not use heat transfer machine for food processing.
- Using and storage should be kept dry.
Troubleshooting
Q: Why does the temperature not reach the set value and | press the Timer
button, the machine begins to countdown, Is it something wrong?
A: Please don’t worry, it is normal, after the temp reach your desired value
(not setting value). you can press the Timer. Make sure that your temp reach
the recommended settings.
Q: What are the tips for successful transfers with Hobby Press?
A: For perfect transfers that last, three things are important:
1. A firm, even surface lron boards and plastic tables can not provide a
firm, even surface needed for successful transfers. We suggest you can use our
silicone mat.
2.Use the recommended settings for the iron-on and base material you’re using.
3. Make sure you apply firm pressure when transfer.
Q: How hard do I have to press?
A: Some applications call for “gentle” pressure, and some call for “firm”
pressure Firm pressure means press down with two hands and 15-40 Ibs of body
weight. Gentle pressure means one hand with 5-15 lbs of body weight. In all
cases, a waist-high table is recommended for ease in applying the recommended
pressure.
Q: When pressed onto the garments, the color of the design is faded?
A: Reason comes from three aspects, the pressure is too low, the temperature
is not hot enough or the design has not been pressed for enough time. You may
need to try more to get right temp, time and pressure.
Q: I followed the instructions and my iron-on didn’t stick. What happened? How
do I get it to work?
A: The most common reasons for your images not sticking:
1, Press machine did not make full contact with the base material. This could
be because of seams, zippers or anything else that will cause you to not have
a flat surface.
2. Verify that your Press machine is set to the recommended settings.
3. Be sure heat has been applied to both the front and the back of the design
for the recommended time.
4. Re-touch the front and back of material with heat for an additional 10-15
seconds.
Q: The Press Machine temperature goes down when | apply it to the image. Is
this something wrong?
A: Press temperature may fluctuate briefly when placed on the base material
after heating.
This is due to the difference in temperature of the heated plate and the base
material.
Don’t worry, the Machine temperature will quickly return to the selected
setting.
Your image adhesion will not be affected.
Q: My machine keeps turning off, and I have to turn it back on. Why?
A: This is the auto-shut off safety feature of Heat Press Machine. After 10
minutes of inactivity, or no button pushes, the device will alert you and then
shut off.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Better Design for Our Happy Life
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>