ZERODRAG RACE-X Aurora Race X LED User Manual

Table of Contents

Specifications :

In The Box:

Wiring:

Multiple led pads on the flight controller:

Connect each ZERODRAG Aurora Race-X led to a flight controller using The LED pad:

Connect each Aurora Race-X DIn to each of the LED pads
Connect Aurora Race-X 5V and GND pads to the 5V and ground pads of the flight controller

If only ONE LED pad on flight controller:

Connect the ZERODRAG Aurora Race-X led to a flight controller using The LED pad:

Connect the different Aurora Race-X DIn in parallel and then connect to the LED pad
Connect Aurora Race-X 5V in parallel and connect to the 5V pad of Flight Controller
Connect Aurora Race-X GND in parallel and connect to the GND pad of Flight Controller

Configuration:

Betaflight:

Turn on expert mode
In the Betaflight Configurator, Enable the LED_STRIP in the Configuration Tab under the Other Features section
Select wire order mode and choose at least 12 cells 011 for Aurora Race-X
Select all LEDs, change LED Functions to your desired feature and color
Save changes by selecting the Save button

INAV:

In the INAV Configurator, Enable the Multi-color RGB LED strip support in the Configuration Tab under the Other Features section
Select wire order mode and choose at least 12 cells 011 for Aurora Race-X
Select all LEDs, change LED Functions to your desired feature and color
Save changes by selecting the Save button

Contact:

FAQ:

Q: Can I use more LED boards than the number of LED pads on my flight controller?
- A : Yes, you can use method 4.b as described in the user manual.

The ZERODRAG Aurora Race-X LEDs come with LEDs on 3 directions that will ensure that the skies will be illuminated from all directions.

Specifications

The ZERODRAG Aurora Race-X LED Boards boast the following specifications:

Wiring

LEDs can be wired in two ways

Multiple led pads on the flight controller

Connect each ZERODRAG Aurora Race-X led to a flight controller using The LED pad:

Connect each Aurora Race-X DIn to each of the LED pads Connect Aurora Race-X 5V and GND pads to the 5V and ground pads of the flight controller.

ZERODRAG-RACE-X-Aurora-Race-X-LED-FIG1

If only ONE LED pad on the flight controller

Connect the ZERODRAG Aurora Race-X led to a flight controller using The LED pad:
Connect the different Aurora Race-X DIn in parallel and the connect on the LED pad.
Connect Aurora Race-X 5V in parallel and connect to the 5V pad of the Flight Controller.
Connect Aurora Race-X GND in parallel and connect to the GND pad of the Flight Controller.

If you have a more led boards than the number of LED pads on your flight controller, you can use method 4.b.

Betaflight

turn on expert mode
In the Betaflight Configurator, Enable the LED_STRIP in the Configuration Tab under the Other Features section as shown: Save changes and reboot the flight controller by selecting the Save And Reboot in the bottom right corner.
Click on the wire order mode, and select at least 12 cells (0-11) for Aurora Race-X.
Exit wire order mode and select all LEDS, in LED Functions change from none to any feature you want and select the color you like.
- Save changes by selecting the Save button on the bottom right corner.

5.b. INAV

In the INAV Configurator, Enable the Multi-color RGB LED strip support in the Configuration Tab under the Other Features section as shown
- Save changes and reboot the flight controller by selecting the Save And Reboot in the bottom right corner
Click on the wire order mode, and select at least 12 cells (0-11) for Aurora Race-X.
Exit wire order mode and select all LEDS, in LED Functions change from none to any feature you want and select the colour you like.
- Save changes by selecting the Save button on the bottom right corner.