saxby electrical 20A 1G DP Switch With Flex Outlet and Neon Instruction Manual
- June 1, 2024
- saxby electrical
Table of Contents
saxby electrical 20A 1G DP Switch With Flex Outlet and Neon
Product Information
Product Name: 13A 2 Gang Unswitched Socket
Description: This product is a double unswitched socket suitable for
connecting electrical devices.
Specifications
- Voltage: Suitable for standard voltage levels
- Amperage: 13A
- Number of Gangs: 2
- Switch Type: Unswitched
Product Usage Instructions
Installation
- Identify the live, neutral, and earth wires from the power supply.
- Connect the live wire to the live terminal on the socket.
- Connect the neutral wire to the neutral terminal on the socket.
- Connect the earth wire to the earth terminal on the socket.
- Ensure proper insulation and secure all connections tightly.
Operation
- Once installed, plug your electrical devices into the socket.
- Make sure the devices are switched on if required as this socket is unswitched.
- Avoid overloading the socket by connecting too many devices.
- If any issues occur, disconnect all devices and consult a qualified electrician.
Frequently Asked Questions (FAQ)
Q: Can I use this socket for outdoor applications?
A: This socket is designed for indoor use only. For outdoor applications,
consider using weatherproof sockets.
Q: Is it safe to connect high-power appliances to this socket?
A: It is recommended to check the amperage and wattage ratings of both the
socket and the appliance to ensure safe operation.
WARNING
Do not use on freshly plastered or damp walls as this may cause tarnishing.
All products must be earthed.
Environmental Protection
waste electrical products should not be disposed of with household waste.
Piease recycles where facilities exist. Check with your Local Authority or
retailer for recycling advice.
