The Home Depot WSCDD17-6B Lighting Fixture Instruction Manual
- June 1, 2024
- THE HOME DEPOT
Table of Contents
The Home Depot WSCDD17-6B Lighting Fixture
Safety Information
Before starting installation of this fixture Or removal of a previous fixture,
disconnect the power by turning off the circuit breaker or by removing the
fuse at the fuse box.
Consult a qualified electrician if you have any electrical questions or need
to replace the driver.
WARNING: Disconnect the power before removing or installing a light fixture.
Warranty
WHAT IS COVERED
The manufacturer warrants this lighting fixture to be free from defects in materials and work man ship for a period of 2 years from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling.
WHAT IS NOT COVERED
This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear.
Key Dates
Product Mode:| WSCDD17-6B| Input Voltage:| 110-120V /
220-240V 50/60 Hz
---|---|---|---
Lamp Base:| E12(USA/CA)/E14(EU)| Number of Lights:| 6
Bulb Included:| NO| Max. Power:| 40W*6
Color:| Black| Material:| Metal
Installation
Step:
- Screw pole(B)clockwise into (A)to tighten. (Same situation with the other five poles).
- Tighten (C) in (A) with screws.
- Screw pole(D)clockwise into (A)to tighten.
- Install the black metal lampshade,(E )to (F).
- Install the lamp bulbs,(G )to (F).
- Fix the bracket(H) into the ceiling.
- Connect to AC110-240V.
- Fix the light with screws on the bracket,(I).
INTERIOR MAINTENANCE
Disconnect power to the fixture by turning off the circuit breaker or by
removing the fuse at the fuse box.
NOTE: Use a dry or slightly dampened clean cloth to wipe the interior
surface of the fixture.
Troubleshooting
| Problem | Solution |
|---|---|
| The light will not turn on. |
- Make sure the power supply is on.
- Test or replace the switch.
- Check the wiring.
- Replace the driver.
The fuse blows or circuit breaker trips when light is turned on.|
- Check the wire connections.
Company Profile
We are a leading supplier of lighting products, We have our own R &D base and production base, company is involved in commercial LED lighting, indoor and outdoor lighting, and other fields, it has been recognized by many countries and used. Providing the public environment with high-quality, energy-saving, beautiful artificial lighting.
Concluding Remarks
-
Thank you very much for your support and choose to purchase our products, If you like it, a positive review will strongly encourage us to do better in the future;
If you have any questions about this product, please feel free to contact us. -
Finally, sincerely wish you and your families have a great life.
If you have any questions regarding your purchase, please feel free to contact us at:
- In the USA/CA: support02@dingliled.com
- In the EU: support03@dingliled.com
Finally, from our family to yours. We truly hope you enjoy our products.
CUSTOMER SUPPORT
If you have any questions about this fixture, please contact us:
In USA/CA: support02@dingliled.com
In EU: support03@dingliled.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>