Tinzzi T30 SmartWatch User Guide
- June 1, 2024
- Tinzzi
Table of Contents
Tinzzi T30 SmartWatch
Quick-use instructions for watches
Component Introduction
Instruction for Charging
Charging the device to active before the first time using; To charge your
device, plug the charging cable into the adapter or USB port on your computer.
Install bracelet APP
Scan the following QR codes or go to the major APP Stores to download and install the APP” DeeFit Pro”
Device requirements: iOS 10.0 and above; Android 5.0 and above, Bluetooth 4.0 is supported.
Main function interface
Main interface/dial
Press and hold the touch screen on the main interface to enter. Slide left and
right to switch and click OK. The dial has 3styles.
Step/distance/calorie
View the number of steps taken at any time of the day, walking distance and
calories burned. Can be synchronized to the app in time to view the sports
data.
Heart rate interface
Switch to the heart rate test interface to enter the heart rate real-time
Monitoring, measurement data can be synchronized to the APP in time. And have
a test report.
Blood oxygen interface
Switch to the blood oxygen test interface to enter the real-time detection of
blood oxygen. Test results are displayed directly on the bracelet interface
Weather interface
The weather interface will display the current weather, Weather information
needs to be connected to the app. Can get data, if disconnected for a long
time, whether letter information will not be updated.
Stopwatch
Click the stopwatch icon to enter the stopwatch function. Swipe right
Message interface
On the main interface, slide into the message interface and click the message
icon to view the message. Click to turn the page, view the message to exit or
right to exit.
Sports interface
Press the button on the main interface to enter the motion interface, and
right-slide back to the main interface. Click on the motion map The target can
enter the motion mode detection. Running, cycling, swimming, skipping, table
tennis, badminton tennis. Press the button on the main interface to enter,
slide up and down to switch, click to start the calculation, and right-slide
to exit the current Sports mode.
Setting function interface
In the main interface, slide down to enter the setting function interface, you
can choose “Find phone” “Brightness adjustment” “About” “Settings” Items.
Click the icon to enter the corresponding function settings.
Find the phone interface
In the connected state, click the “Find” icon to enter, click, the phone will
Give a vibrate or ringtone reminder.
Brightness adjustment interface
You can freely choose the screen brightness by clicking the brightness
adjustment icon.
About the interface
Click on the icon to display the model number of the machine and the last four
digits of the Bluetooth address.
Restore interface
Click the restore icon to enter, you can restore the bracelet.
Shutdown interface
Click on the shutdown page to enter, you can shut down.
Other feature reminders
The reminder function needs to set the open reminder switch on the APP side
and keep the mobile phone and the bracelet in the Bluetooth connection. In the
successful state, the message is a vibration reminder.
Sleep monitoring function
When you fall asleep, the bracelet will automatically judge to enter the sleep
detection mode, automatically detecting your deep sleep / shallow all night
Sleep/wake up time, calculating your sleep quality; sleep data only supports
the APP side view.
Note: Sleep data will only be available when you wear the bracelet to sleep.
Precautions
- It is forbidden to use an adapter with a charging voltage greater than 5V and a charging current greater than 2A. The charging time is 2-3 hours.
- Do not charge in case of water stains
- This product is an electronic product, not for medical reference, measurement data is for reference only.
common problem
Why can’t I push caller information or content?
- Android QQ WeChat reminder service permission to obtain When the user opens the QQ WeChat reminder switch for the first time, the app will get the corresponding permission and check the APP. Program to get the corresponding permissions.
- lOS (incoming call, SMS, QQ, WeChat) reminder switch, the system will automatically pop up the pairing request, users only need to choose to pair.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canad a’ s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device. The term “IC: “before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>