COZY N SAFE EST-238 Hudson i Size Car Seat Instruction Manual

COZY N SAFE EST-238 Hudson i Size Car Seat

GENERAL SAFETY INSTRUCTIONS

Please take the time to read these instructions carefully and always keep them in the storage pouch provided on the child seat for later reference.
The instructions must accompany the child seat if it is later passed on to a third party.

DANGER: For the protection of your child:

• Before closing the vehicel door, check that neither your child or any parts of the child seat can get jammed in the door.
• In the event of an accident at a collision velocity greater than 10 km/h, it is possible that the child seat may be damaged without the damage being immediately visible. In this case, the child seat must be replaced. Please dispose of it properly.
• Always have the child seat examined if it has been damaged (e.g. if it falls to the ground).
• Regularly check all important parts for damage. h particular, ensure that all the mechanical parts are fully functional.
• Never lubricate any parts of the child seat with grease or oil.
• Never leave your child unattended in the child seat in the vehicel.
• Have your child enter and exit the vehicle on the pavement side only.
• When oot in use. protect the child seat from direct exposure to sunlight.
• The child seat can become very hot in direct sunshine. Children’s skin is sensitive and could be harmed as a result.
• The more snugly the belt fits over your child’s body, the safer your child will be. Therefore, avoid having your child wear thick clothes under the belt.
• On long journeys, take regular breaks in order to give your child a chance to run around and play.
• If using on the rear seat: Move the front seat far enough forward to ensure that your child’s feet will not knock against the backrest of the front seat (to prevent the risk of injury).

DANGER: For the protection of all vehicle occupants:

In the case of an emergency stop or accident. unsecured objects or people may cause injury to other occupants in the vehicle. Therefore, please always ensure that _

• no load-bearing contact points are used other than those specified in these instructions and those marked on the child seat.
• the backrests of the car seats are secured (for example. check that any fold-down rear seat bench has snapped into place).
• all heavy or sharp edged objects present in the vehicle (e.g. on the parcel shelf) are held securely.
• all persons in the vehicle have their seatbelts fastened.
• the child seat is secured whenever it is in the vehicle. even if it is not carrying a child.

WARNING:  For your protection when handling the child seat:

• Never use the child seat in a free- starding position. oot even for test i ng.
• To avoid damage, ensure that the child seat is not jammed in between hard objects (car door. seat rails, etc.).
• Keep the child seat in a safe place when not in use. Do not place heavy objects on the seat and do not store directly next to heat sources or in direct sunlight.
• The rigid items and plastic parts of a child restraint must be so located and installed that they are not liable. duri ng everyday use of the vehicle to become trapped by a moveable seat or in a door of the vehicle.
• The child restraint must not be used without the cover.
• The seat cover should not be replaced with any other than the one recommended by the manufacturer. because the cover constitutes an integral part of the restaurant’s performance.

USE IN THE VEHICLE

Use as Intended

• This child seat has been designed. tested and approved according to the require-ments of the European Standard for Child Safety Equipment(UN 129/03).
• It is designed to secure a child in the vehicle.It is not a toy and is not suitable for use as a seat outside the vehicle.

SAFETY NOTES

Elimination of the protective function through modifications Unauthorised technical changes can cause the protective function of the seat to be reduced or completely eliminated. The certification is invalidated if any modifications are made to the child seat.

• Do oot make any technical changes to the child safety seat
• Only the manufacturer is permitted to make modifications to the child safety seat. Risk of injury through improper use
• If you do not use this product as intended. serious in jury or death may result.
• Never secure the child’s seat with a 2-point seat belt.
• Read and follow the instruction manual for the vehicle used to transport this child seat.
• If in doubt. refer to the manufacturer or the vendor of the child restraint system
• Use the child seat according to the body height of the child to be secured.

Parts List

Please make sure there are no missing parts. Please contact the retailer if anything is missing.

For concerns on Installation

see images 1.2.

• Only suitable if the approved vehicles are fitted with 3 point safety belts.approved to UN/ECE Regulation No.16 or other equivalent standards.
• If the buckle strap of car seat is too long, the child restraint system can not be installed firmly. It is very dangerous. If any doubt, please consult the child restraint system manufacturer.

Scope of application for children

• This child seat is approved for three installation methods. A. B1 and B2.
• Use the installation method depending on the size of the child to be secured. see images 3.

Use the isofix

see images 4-7.

• Fit the ISOFIX guides with the ISOFIX anchor points.4-5

Warning: The ISOFIX guides can protect the surface of the vehicle seat from being torn. They can also guide the ISOFIX connectors.

• Insert the locking arms into ISOFIX attachment points. 6 until you hear an audible Click which indicates they are fully engaged.And on both sides of the locking arms button tum into(Green) .7

A: 76-105em/9kg-18kg With ISOFIX+Top Tether+5 point seat belt

see images 8-16.

1. Press both button and push out the isofix connector.8
2. Find out isofix connection in the car.9
3. Push child seat follow the direction and insert isofix connector into isofix guide.10
4. Press the adjusting button and ad just the belt of top tether to the longest.11
5. Connect top tether with the fixing point on the car.12
6. String the belt of top tether until the ad juster shows green.13
   • Warning: Top tether is only for Use installation method A
7. Loosen the harness.14
8. Release the buckle.and put the child into the safety car seat. Then align the left and right buckle tongues to one tongue and insert into the buckle until you hear a’Click”.15
9. Pull the shoulder straps upwards to remove the slack from the lap sections of the harness then pull the adjuster strap until the harness is fully tightened.16

B1: 100-150cm/15kg-36kl/ With ISOFIX+car seat belt / B2: 100-150cm /15kR-36kg With car seat belt

see images 17-22.

1. “B1” Connect ISOFIX with anchorage point on the car seat.17
2. “B2” Hide ISOFIX in the base. Put the seat against the car seat.18
3. Routine to remove car seat pad.19 (see image 30 -34 for details)
4. Hide the strap of both sides behind the backrest cover.19-1
5. Place the buckle in the base (under the cover).19-2
6. No need to take off the top tether. Click it onto the base.20
   • Warning: Do not use top tether when using adult safety belt.
7. Follow the routine to install the baby car seat.21
   • Warning: Stock the baby car seat in a safe place or ensure the baby car seat is firmly installed when not using it.
8. Put the child into the safety car seat and then Pull car seat belt follow the belt route and lock.22

Disassembly and hide ISOFIX

see images 23-24.

• Press the button to release the isofix connector 23 and take away the seat.24

Using the buckle And Adjustment

Using the buckle

see images 25-26.

• Locking Method:
  • Align the left and right buckle tongues to one tongue and insert into the buckle until you hear a”Click”.25
• Unlocking Method:
  • You can press the red button of the buckle downwards.the two metal sections will be pop up.26

Adjustment for Head Support and Shoulder Harnesses

Note

Instructions for use of cushion

• Please use cushion for the child less than 87crn
• Put cushion in child restraint system. and then adjust harness and cushion following the picture.

Steps of backrest and base assembly

see images 27-29.

1. Align base and backrest in a straight line.27
2. Place backrest hooks inside base securely.28
3. Gently keep pressure on hooks as you lift the backrest up.29
   • Note: DO NOT FORCE MAY CAUSE DAMAGE.

Remove the cover

see images 30-37

1. Loosen the harness. 30
2. Release the buckle. 31
3. Keep the removed cushion well. 32
4. Place the buckle in the base (under the cover). 33
5. Hide the strap of both sides behind the backrest cover 34
6. Click the top tether onto the base. 35
7. Turn the seat to the back and unlock the snap fastener36
8. Pull all directions to take out the cover. 37
   • Note: Follow in reverse order and repeat the procedure to put on the fabric cover.

Care and Maintenance

• In daily use.check periodically the child seat.The child seat should be replaced after an accident.
• Please keep this child seat in dry and ventilated place to avoid damp moldy
• If the child seat becomes dusty.clean the seat belt and the plastic pieces by swiping them with a damp sponge and let it dry naturally.
• If food or drink drop accidently on the buckle.disassemble the seat belt from the child seat and rinse it gently by warm water.Leave it dry naturally.
• For cleaning the entire child seat fabric cover.please refer to the washing instructions.

Washing instruction

• Cleaning the entire child seat fabric cover.
• Never use any solvant, chemical detergent or lubricant on any part of your child seat.

List of approved cars

The following vehicle list is only for reference. If your vehicle does not in the list. before using, please consult with the retailer or manufacturer.
The seat could not fit all seating positions at a stature above 135cm, if you have doubt, please consult with the manufacturer or retailer.

More Information

CHILD INFORMATION

(Keep WITH CAR SEAT AT ALL TIMES IN CASE OF EMERGENCY)

• DATE OF BIRTH (DD/MM/YYYY): ………………………….
• ADDRESS: ………………………….
• ALLERGIES/MEDICAL CONDITIONS: ………………………….

Cozy N Safe

• www.cozynsafe.com
• Oxford Street, Wolverhampton, West Midlands, WV14 7DP, UK
• Tel: +44 (0) 1902 494905
• Email: enq@cozynsafe.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>