HREFEU Tailgate Shade Awning Tent with Portable Waterproof Storage Bag Instruction Manual
- June 1, 2024
- HREFEU
Table of Contents
HREFEU Tailgate Shade Awning Tent with Portable Waterproof Storage Bag
Product Specifications:
- Long fiber rod: 2 pieces
- Short fiber rod: 1 piece
- Tail tent tarpaulin with two suction cups
- Support rod : 2 pieces
- Nail: 6 pieces
- Rope: 6 pieces
Product Usage Instructions
Step 1: Preparation
Lay out the required products on the ground:
- 2 Long fiber rods
- 1 Short fiber rod
- Tail tent tarpaulin with two suction cups
Step 2: Setting Up
Extend the tent tarpaulin and set up the support rods and nails as follows:
- Attach 2 support rods to extend the tent tarpaulin
- Secure the tent with 6 nails
- Use 6 ropes for additional support
Step 3: Assembling the Rear Tent
Follow these steps to assemble the rear tent:
- Ensure the rear tent is parallel to the top of the vehicle
- Tie two ropes to the rear tire for fixation
- Pass the stay rod through the small hole on the webbing and secure it with the wind rope
- Fix the bottom of the extension cloth by hanging the rod hole with a hook
Step 4: Final Assembly
Complete the assembly of the rear tent as follows:
- Unfold the tarpaulin of the rear tent
- Insert the long fiber rods at both ends
- Fasten the buttons on the cloth surface
- Secure with ropes at the top
Finishing Touches
To ensure firmness, follow these steps:
- Tie a knot for added security
- Turn over the surface and splice the short fiber rods
- Insert them into the small pocket in the middle of the cloth surface
- Secure them with a rope in the middle of the silver-coated surface
Frequently Asked Questions (FAQ):
-
Q: How do I secure the rear tent to my vehicle?
A: Ensure the rear tent is parallel to the top of the vehicle, tie ropes to the rear tire for fixation, and use stay rods and wind ropes for additional support. -
Q: What should I do if the suction cup is not firm
A: Ensure a tight seal by tying a knot for added security and ensuring proper placement of the suction cup on a clean, flat surface.
Operation Instructions
Step1 Lay the required products on the ground
Unfold the tarpaulin of the rear tent, insert the spliced long fiber rods at both ends, fasten the buttons on the cloth surface, and fasten them with ropes at the top after both operations
Turn over the surface, after splicing the short fiber rods, insert them into the small pocket in the middle of the cloth surface and fix them with the rope in the middle of the silver coated surface
The rear tent shall be parallel to the top of the vehicle, and two ropes shall be tied to the rear tire for fixation. The stay rod shall pass through the small hole on the webbing and be fixed with the wind rope. The bottom of the extension cloth shall be fixed by hanging the hole of the rod with a hook