EX-GUARD CV-15MSP-25 Black Horse Spartan Grille Brush Bumper Instruction Manual
- June 1, 2024
- EX-GUARD
Table of Contents
EX-GUARD CV-15MSP-25 Black Horse Spartan Grille Brush Bumper
TOOLS NEED FOR INSTALLATION
- x 3/4” IMPACT DRIVER
- x 5/8” IMPACT DRIVER
- x 15/16” WRENCH
- x 1/2” DRILL BIT
- x LARGE STRAIGHT BLADE SCREWDRIVER
- x SMALL STRAIGHT BLADE SCREWDRIVER
- x BUMPER CLIP REMOVER
- x JIG SAW
- x TORQUE WRENCH
- x 1 1/8” DEEP SOCKET
- x 15/16” SOCKET
- x T-25 TORX BIT
- x T-45 TORX BIT
INCLUDED WITH THE GUARD AND BRACKET KIT
- x QTY 2 – CV-15MSP-BR03SA GUARD BRACKETS
- x QTY 1 – CV-15MSPDS
- x QTY 1 – CV-15MSPPS
- x QTY 1 – CV-15MSP-25
- x QTY 2 – 3/4”-10 NYLON INSERT 18-8SS
- x QTY 4 – 5/8-11 NYLON INSERT L/N 18-8 SS
- x QTY 4 – 5/8-11 X 2-1/4 GR 8
- x QTY 2 – CV-19MSP-BR06SA
- x QTY 8 – M12-1.5X35 BOLTS
- x CUT TEMPLATES
IF AT ANY TIME YOU NEED HELP OR HAVE A QUESTION, PLEASE FEEL FREE TO GIVE US A CALL AT 888.902.2777 OR EMAIL US AT CUSTOMERCARE@EX- GUARD.COM
PARTS LIST
- CV-15MSP-BR10
- BOLT KIT – CV-BRK1
- COMPATIBLE GUARDS
- Check https://ex-guard.com/
| T M N | A T NUMB | SC T N | T |
|---|---|---|---|
| 1 | CV-15MS -B 03SA | T UCK M UNT NG A M W L | 2 |
| 2 | CV-15MS S | T UCK M UNT NG B ACK T S | 1 |
| 3 | CV-15MS S | T UCK M UNT NG B ACK T S | 1 |
| 4 | XG-001-62C225 CS8 | 5/8-11 X 2 25 FLANG X A B LT | 4 |
| 5 | XG-001-62CNN S | 5/8-11 Nylon nsert L/N 18-8SS | 4 |
| 6 | XG-001-75CNN S | 3/4-10 N L N NS T 18-8 STA NL SS X NUT | 2 |
| 7 | XG-001-12C35S FWZ | M12X1 75MMX35MM X A | 8 |
| 8 | CV-19MS -B 06SA | W NC ASS MBL | 2 |
ATTENTION!! Any Ex-Guard grille guard, bracket kit, or hardware must be used with corresponding Ex-Guard components. Use of any other product or brand with Ex-Guard products will immediately void the warranty provided by Ex-Guard Industries.
THIS DRAWING IS THE PROPERTY OF EX-GUARD INDUSTRIES, INC. COPYRIGHT IS RESERVED BY THEM AND THE DRAWING ISSUED ON CONDITION THAT IT MUST NOT BE USED FOR ANY OTHER PURPOSE OTHER THAN FOR WHICH IT WAS SUPPLIED AND NOT TO BE COPIED, REPRODUCED, RETAINED OR DISCLOSED TO ANY UNAUTHORIZED PERSON EITHER WHOLLY OR IN PART WITHOUT THE CONSENT WRITING OF EX-GUARD INDUSTRIES INC.
MOUNTING INSTRUCTIONS
- CV-15MSP
- Mercedes-Benz, and Dodge Sprinter
- REMOVE THE BOLT THAT SUPPORTS THE DEF TANK ACCESSIBLE FROM BEHIND BUMPER SKIN
- REMOVE THE BOLT THAT SUPPORTS THE DEF TANK ACCESSIBLE FROM UNDERNEATH THE VAN
- REMOVE THE CROSSMEMBER AND DISCARD. (FOR VEHICLES WITHOUT THE CROSSMEMBER USE THE PROVIDED HARDWARE)
- 888.902.2777
- CUSTOMERCARE@EX-GUARD.COM
- EX-GUARD.COM
References
- Ex-Guard® | Official Site | Grille Guards for Semi-Trucks & Vans
- Berkshire Hathaway GUARD Insurance Companies