TOW LD DLite1800 Beam Switch Smart Bike light Remote Control User Manual
- June 1, 2024
- TOW LD
Table of Contents
TOW LD DLite1800 Beam Switch Smart Bike light Remote Control
Specifications
- Light Output: 900 Lumens
- Battery Life: 4 hours on medium mode
Basic Operation
Power/mode button: Press and hold for 0.5 seconds to turn the light on
and off. Once on, single-press the button to cycle through the various modes.
Flood/Focus beam button: Single-press to switch between Flood and Focus
beams. Press and hold for 0.5 seconds to switch between Intelligent and Manual
modes.
Intelligent Mode
In Intelligent mode, the indicator on both buttons will be blue. The bike
lamp will flash once to indicate a successful switch to Intelligent mode.
Product Overview
DLite 1800 is a smart bike front light that maintains far and near light dual light source system, flood beam and focus beam. Handlebar mount and Gopro mount options bring better appearance and operation experience. Besides,this bike light also integrates far and near light dual light source system, type-C charging and discharging and max 210m beam distance into one. What’s more, it also boasts other significant features including power management function, constant current technology, intelligent start and stop, temperature control technology, wireless control technology, IPX-6 waterproof design, small and compact size, rich functions. That’s how DLite Bike Light provides more pleasant lighting experience for road cycling, cross-country cycling and mountain cycling particularly.
- Use USA CREE LED, Powered by a 5000mAh rechargeable lithium-ion battery
- 108mm(L)x 31. 6mm(W) x 38mm(H)
- Net weight 179g(including battery):
- Handlebar/gopro mount ( Combined with bike computer
- Support wireless remote control technology:
- Regular maximum brightness is 1800lumens;The lights are controlled up to 2100lumens through wireless remote control;
- Vibration sensing, temperature control intelligently;
- TYPE C charging and discharging;
- Side lighting to increase your visibility day or night;
- Overcharge and over-discharge protection to protect battery.
Specifications (ANSI/NEMA FL 1)
Basic Operation
Power/mode button: Press and hold for 0.5s to turn on and off. Once on,
single-press the button to cycle through the various modes. ”
Flood/Focus beam button: Single-press to switch between Flood and Focus beams.
Press and hold for 0.5s to switch between Intelligent and Manual modes. In
Intelligent mode, the indicator on both buttons are blue. In Manual mode, the
indicator on both buttons are green. The bike lamp flashes once to indicate a
successful switch between Intollinont and Manual madoc.
HalHllebar/GoPro mount
Intelligent mode auto power on/off
In Intelligent mode, after about 120 seconds of not detecting any vibration, the lamp is automatically shut off. When the bike light sense any vibration, it automatically turns on the lamp.
Intelligent mode and remote control
When the bike light is shut off using the remote control, it goes into standby
mode. In standby mode, the button indicators flash blue every two seconds.
Within one hour after going into standby mode, the remote control can be used
to operate the bike light. After more than one hour, the bike light exits the
standby mode, the button indicators no longer flash and remote control
operation is disabled.
Status light and battery level:
With the light off, single-press either button to display the battery level
(the button indicator will stay lit for three seconds). With the light on or
when using the charge-out feature, the battery level is displayed in real-
time.
- Intelligent Mode
- Indicator solid blue(30% – 100%)
- Indicator flashing blue slowly(10% – 29%)
- Indicator flashing blue and red rapidly(Less than 10%)
- Manual Mode
- Green indicator on(30% – 100%)
- Green indicator flashing slowly(10% – 29%)
- Indicator flashing green and red rapidly (Less than 10%)
Low Battery Warning
When the battery power is lower than 10%, the main light flashes four times
quickly, prompting the user to charge in time to prevent battery damage or
shortening of life; the main light flashes four times every 30 seconds until
the battery voltage is lower than 2.8V and then the battery is turned off.
Charging instruction
Connect the flashlight to the computer or the power adapter through the data
cable, and the machine can be charged within 3 seconds when charging. The
maximum charging current is 2A, when charging, the red light will flash to
indicate charging status, when charging, the indicator light will turn green
(manual mode) or blue (intelligent mode), the charging time will be about 4
hours, the charging time will vary according to the battery capacity. While
charging, all modes except high and medium of focus beam can still be used.
Discharging instruction
plug the dish the us aritone, he ma chang can discharge the extended charging
within 3 seconds, the maximum discharge current is 2A. While discharging, all
modes except high and medium of focus beam can still be used.
- High brightness product, do not look directly at light, so as not to cause vision damage.