AgriExpo PT580 RFID ID Reader Instruction Manual
- June 1, 2024
- AgriExpo
Table of Contents
AgriExpo PT580 RFID ID Reader
Product Specifications
- Model: PT583
- Power Source: Lithium Battery
- Connectivity: Bluetooth
- Language Options: Multiple languages are available
- Scan Modes: TTF, BARCODE
- Battery Shutdown Delay Range: 1-20 minutes
- Firmware Update : Available, follow the manufacturer’s guidance
Product Usage Instructions
Battery Installation
- Open the battery cover.
- Connect the battery socket.
- Load the lithium battery into the device.
- The screen will display the battery power status.
Scanning Steps
- Press the designated button to start scanning.
- Enter the scanning interface to scan tags.
- Read and understand the options available such as language choice, scan mode, task creation, etc.
- Utilize the device to record tags accordingly.
Operation Menu Settings
- In the scanning interface, press a specific button to enter the operation menu interface.
- Select different functions like record, options, etc., using the designated buttons.
- Confirm selections by pressing the appropriate button.
- Use shortcuts for language switching by long-pressing a button and pressing another simultaneously.
FAQ
- Q: What should I do if the device does not power on?
- A : Ensure the lithium battery is properly installed and charged. If issues persist, contact customer support.
- Q: How can I update the firmware of the device?
- A : Follow the manufacturer’s guidance for firmware updates. Typically, it involves connecting the device to a computer and running the update software.
- Q: Can I use this device in portable exposure conditions?
- A: Yes, the device has been evaluated to meet general RF exposure requirements and can be used without restrictions in portable conditions.
product overview
Battery Installation
(Note: Equipment failure due to inappropriate battery loading is beyond free warranty.)
Screen Display
Menu Guide
- RECORD: Enter the record menu, press to check the records.
- OPTIONS:
- LANGUAGE: Operation language choice.
- SCAN MODE: TTF or BARCODE
- TASK: Create multiple tasks.
- RECORD OPTIONS: There are “YES” & “NO” two modes. Under “NO” mode, the same tag number will be recorded only once if it is multi-read. Under “YES” mode, the same tag number will be recorded many times if it is multi-read. The default mode is “NO”
- DATE and TIME: Set the current date and time.
- BEEP MODE: Default mode is “Open”.
- USB KEYBOARD: A USB-simulated keyboard will output the records in real time.
- POWER MODE: Shut down delay setting, the range is “1-20” minutes.
- CLEAR ALL RECORDS: Clear all the records in the reader.
- FIRMWARE UPDATE: Update the device software. If needed, please operate under the manufacturer’s guidance.
- DEVICE INFO: The device number (Bluetooth number) and device version number displayed are for the manufacturer’s maintenance
- SHUT DOWN: Shut down the device.
Scanning steps
Press to start and enter the following interface, you can scan the tags under this status.
The reader will enter the following interface if no tags were scanned within 1 minute, press` ‘to scan again
The reader will display the tag information after you scan a tag, press to scan the next tag
Operation menu setting
Press in the scan interface to enter the operation menu interface
After entering the operation menu interface, press” to choose with Mark, press to confirm Press to go back to the previous interface Shortcuts of language switching: In the following interface, long press and press in the meantime, to switch the language rapidly
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.