AXEFIT C2-A Walking Pad with Incline Instruction Manual
- June 1, 2024
- AXEFIT
Table of Contents
C2-A Walking Pad with Incline
Specifications
- Model: C2-A
- Intended Use: Indoor home use
- AC Voltage: 100V-120V
- Maximum User Weight: 120/265 lbs
- Warranty: 1 year
Product Usage Instructions
Security Cautions
-
This treadmill is designed for indoor home use only on a flat
and clean surface. Ensure there is a safety area of 1000mm x 1000mm
behind and 500mm on each side of the treadmill. -
Adult supervision is required for minors. Individuals feeling
unwell, mentally handicapped, or lacking common sense should not
use the treadmill without supervision. -
Replace damaged power cords with manufacturer-approved parts
only. -
Use only with 100V-120V AC voltage and ensure proper grounding.
Seek professional help if plug and socket incompatibility is
found. -
Check all parts before use to ensure proper assembly and
tighten screws and nuts. -
Wear appropriate clothing to prevent accidents, and keep
children and pets away during usage. -
Avoid contact with moving parts and do not place hands or feet
under the running belt. -
This treadmill is for home use only and not suitable for
professional training or medical purposes. -
The heart rate display is not intended for medical use.
-
Only one person should be on the running belt at a time.
-
Always shut down and unplug the treadmill before cleaning or
maintenance. -
Unplug the treadmill when not in use or leaving it
unattended. -
Use only original factory-provided spare parts; do not replace
them privately.
Quality Assurance Commitment
We guarantee high-quality materials in the product. In case of
any issues during normal use within one year of purchase, we offer
warranty coverage. Contact customer service for assistance with
quality problems within the warranty period. Unauthorized repairs
may void the warranty.
FAQ
What should I do if the power cord is damaged?
If the power cord is damaged, it must be replaced by the
manufacturer or professional maintenance personnel to avoid any
potential dangers.
Can children use this treadmill?
Children should only use the treadmill under adult supervision.
It is important to keep children and pets away from the machine
during operation to prevent accidents.
Is it necessary to wear specific clothing while using the
treadmill?
It is recommended to wear comfortable and tight clothes to avoid
any clothing getting caught in the machine during operation.
Product Instruction
Model:C2-A
Please read the instruction carefully before using.
CONTENTS
SECURITY CAUTIONS ………………………………………………………..01 QUALITY ASSURANCE COMMITMENT
…………………………………02 CONFIGURATION LIST AND TECHNICAL PARAMETERS ………..03 PRODUCT
PARTS ……………………………………………………………..05 ASSEMBLY INSTRUCTIONS ………………………………………………..06
FUNCTION DESCRIPTION ………………………………………………….07 WARM-UP EXERCISE
…………………………………………………………09 MAINTENANCE GUIDE ……………………………………………………….11 ERROR CODE
…………………………………………………………………….14
Note: When you receive the treadmill and use it, please add an appropriate
amount of lubricating silicone oil to the running belt.
HOW TO CONTACT US ON AMAZON?
Step 1: Log in to your Amazon account.
Step 2: Go to Your Orders. Select the item you purchased from us.
Step 3: Select Contact seller.
AXEFIT-service@outlook.com
Scan the QR code on the left to activate the warranty and get the electronic
edition of the product manual, adjusting running belt video and maintenance
video! Scan WhatsApp QR code to add WhatsApp for online real-time support.
1 SECURITY CAUTIONS
In order to ensure your safety and avoid accidents, please read the
instructions carefully before use.
1.This product is intended for indoor home use only. Do not modify it for
other purposes or use it outdoors. The treadmill should be placed on a flat
and clean surface, away from thick carpets or water sources. There should be a
clear safety area of 1000mm x 1000mm behind the treadmill and 500mm on each
side.
2.This product is for adults, minors need adult care. It is forbidden for
those who feel unwell or mentally handicapped or lack common sense to use it.
Unless they are under the supervision or guidance of the person responsible
for their safety regarding the use of the product.
3.If the power cord is damaged, in order to avoid danger, it must be replaced
by the manufacturer or professional maintenance personnel.
4.This product is only used for 100V-120V AC voltage. Please use the power
socket with safe ground line. The installation and grounding of the grounding
plug must be consistent with the parameters of the user’s area. If the plug
and socket are incompatible, please arrange qualified electricians or after-
sales personnel to handle it.
5.Check all parts before use to ensure that the screw and nut are locked.
6.When using it, please wear comfortable and tight clothes to avoid the
clothes being hung by the machine. Don’t let children or pets come near to
avoid accidents.
7.Avoid all moving parts with both hands. Do not place hands or feet in the
space under the running belt.
8.This product is designed for family use only, but not suitable for
professional training and testing, and can not be used for medical purposes.
9.The heart rate display of this product does not provide data for medical
purpose.
10.This product is only for one person on the running belt.
11.Before cleaning and maintenance, please shut down and unplug the power
plug.
12.Shut down the machine and unplug the power plug when you leave.
13.Please use the spare parts provided by the original factory. It is strictly
forbidden to replace them privately.
14.This product is of HC grade, and maximum users weight is 120/265 lbs.
01
2 QUALITY ASSURANCE COMMITMENT
We ensure that the product is made of high quality materials. In normal use,
if there is a problem, we will be responsible for the warranty. The warranty
period is one year (from the date of purchase). If you buy products with
quality problems, please contact our customer service within 12 months. Please
do not deal with them without permission. The followings are not covered by
the warranty:
1.Damage caused by external factors. 2.Use non-original accessories.
3.Privately handled incorrectly. 4.Not follow the instructions. This pledge is
valid only for private use by families and is not applicable to professional
training such as gyms. If you need to buy non-warranty accessories, please
contact customer service. Please provide the following information when
ordering: 1.Instructions. 2.Product model. 3.Fittings serial number.
4.Certificate of purchase date. Before the confirmation of our customer
service, please do not send the products to our company, and send them back
without permission. Our company does not bear any cost.
02
3 CONFIGURATION LIST AND TECHNICAL PARAMETERS
1.Treadmill Configuration
Parts Name
Sketch (for reference)
QTY
Treadmill
1
Remote Controller
1
Instructions
1
Inner Hexagon Spanner
1
Silicone Oil
1
Power Cord
1
03
2.Technical Parameters Para Name
Packing Dimension Product Dimensions
Running Area Motor Power Speed Range Max Capacity Net Weight Gross Weight
Parameters 5023.45.9 inch/1275915 cm 47.2205.1 inch/123.554.513 cm
15.739.4 inch/40100 cm 2.5HP
0.6-3.8MPH / 1.0-6.0KM/H 265 LBS/120KG 38 LBS/17.2KG 46.4 LBS/21KG
3.Applicable Voltage
Country United States
Canada Japan Australia Europe United Kingdom
Voltage 110V 110V 100V 230V
220-240V 220-240V
04
4 PRODUCT PARTS
Motor cover Display panel
Pedal strip Running belt
Motor lower cover
Rear protection cover–L
Rear protection cover–R
05
5 ASSEMBLY INSTRUCTIONS
Assembly steps 1.Open the packing box, remove the relevant accessories and
machine from the box, and
place the machine on flat floor.As shown in Figure 1 below.
Figure 1 2.Incline bracket assembly, The incline brackets can be unfolded to
enhance running excise. Please unfold the incline bracket as below picture
when in need.
3.To use the product, take the power cord plug and insert it into a household
outlet. Then turn on the power switch. Power plug
Power Switch
06
6 FUNCTION DESCRIPTION
1.Display Panel
Start / Stop key Speed up Speed down
Infrared receiver Function display: speed, calories, time, distance.
Function display: When adjusting the speed, the SPEED parameter is displayed.
When the machine is running without any operation, the SPEED, CAL, TIME, and
DIST parameters are displayed in a cycle every 3 seconds.
Motion parameter display and setting range
Display Range
Speed
0.6-3.8 MPH/ 1.0-6.0KM/H
2.Remote controller
Time 0:00–99:59
Distance
0.00-99.9 MI/ 0.00-99.9 KM
Distance 0Kcl–999Kcl
Speed Up
Speed Reduction Start (Pause)/Stop
07
Operating Instructions
Function 1: Press the key to start (pause)/stop1
short press for start or pause, 1.2-1.5 long press for stop.
2: Speed is displayed in the range of 0.6-3.8 mp/h. Calories are displayed in
the range of 0001-9999 KCAL. Time is displayed in the range of 01:00-99:00
minutes. Distance is displayed in the range of 0.00-99.9 mile.
3: During operation, the display screen switches between function menus (time,
speed, distance, calories) every 3 seconds.
4: Automatic stop after 99 minutes of operation.
5: The display goes off after 5 minutes of no operation in the pause state
into the hibernation state.
Start-up Instructions Connect the power and turn on the power switch. The
machine quickly enters standby mode. Press the start button on the keyboard or
remote control to start the machine running at 0.6 mp/h.
Speed Control Instructions During operation, each press of the speed + button
on the keyboard or remote control increases the speed by 0.2 mp/h. Holding
down the speed + button continuously increases the speed in increments of 0.2
mp/h. During operation, each press of the speed – button on the keyboard or
remote control decreases the speed by 0.2 mp/h. Holding down the speed –
button continuously decreases the speed in increments of 0.2 mp/h. Note: When
adjusting the speed, the display screen shows the speed data. If the speed is
not adjusted within 3 seconds, the display screen will switch between function
menus (time, speed, distance, calories) every 3 seconds in a cycle.
Stopping Instructions
During operation, press the stop button on the keyboard or remote control to
slowly stop the machine.
08
7 WARM-UP EXERCISE
Before exercising, it’s better to do stretching exercises first. A successful exercise plan must include warm-up, aerobic and relaxation exercises. The number of exercises should be at least two or three times a week. You can take a day off for exercise. After a few months, you can increase the number of exercises to four to five days a week. Warm-up is an important part of your fitness exercise. Warm-up before every exercise. Moderate warming-up can prepare your body for the next more intense exercise, because warming-up can help muscle warm up and stretch, improve blood circulation and pulse, and send more oxygen into muscle. Repeated warm-up exercise can also reduce muscle soreness after aerobic exercise. We recommend the following warm-up and relaxation exercises.
1. Stretch downward: Bend your knees slightly and bend your body forward
slowly. Relax your back and shoulders and touch your toes with both hands.
Hold for 10 to 15 seconds, then relax. Repeat three times. Figure 1
2. Stretch your ankles: Sit on a clean cushion and straighten one leg. Put
the other leg inward so that it is close to the straight leg. Try to touch
your toes with your hands. Keep it for 10 to 15 seconds. Then relax. Repeat
each leg three times. Figure 2
3. Extension of the calf and foot tendons: body forward hands against the
wall the left leg arches forward, the right leg is straight, the left leg is
on the ground, then bend your left leg and hold it for 10 to 15 seconds, then
relax, repeat each leg three times. Figure 3
Figure 1 Figure 2 Figure 3
09
4. Head movement: 1-tilt your head to the right and feel the left neck muscle
stretch; 2-turn head to the back; turn head to the left; 4-turn your head to
front of the chest. then relax and do it three times. Figure 4
5. Waist movement: stretch your arms to the left and right, then slowly lift
it up, over your head. Put your right arm as far as possible to the
ceiling.Straighten, hold for 1 second, and feel the stretch of your right
muscle.Repeat the same action on the left arm. Figure 5
Figure 4 Figure 5
10
8 MAINTENANCE GUIDE
Warning: Be sure to unplug the power plug of the machine before maintaining
the product.
Use cloth to clean product surface. Full cleaning will prolong the service
life of the machine. Clean the dust regularly to keep the parts clean. Clean
the exposed parts on both sides of the running belt. This will reduce the
accumulation of impurities in the running belt. Keep your sneakers clean.
Avoid bringing foreign bodies under your running belt and wearing your running
board and belt. The surface of the running belt should be scrubbed with a
soapy wet cloth. Please be careful not to splash water on the electrical
components and under the running belt. Check and lock all parts of the
treadmill regularly, replace defective parts and/or leave the equipment idle
for repair.
1.Adjusting the Running Belt If you experience slippage or unevenness of the
running belt while using the treadmill, you can adjust the tension of the
running belt to improve it. Adjusting the running belt has two functions:
tension adjustment and center position adjustment. The running belt has been
adjusted at the factory, but after use, the running belt will stretch and
deviate from the center position, causing friction with the foot pedal side
strip and rear cover, resulting in damage. It is normal for the running belt
to stretch during use. When the product is running without load, it is normal
for the running belt to have a lateral deviation of no more than 5mm.
Adjustment MethodThe picture is for reference only, subject to the real thing
Running with a left bias Adjustment method: With the power turned off, take a
5mm hexagon wrench and turn the left rear roller bolt 1/4 turn to the right to
tighten the running belt. Then the machine is powered on and the test running
belt is centered. Follow this method until the running belt is loosely
adjusted to the center.
11
Running with a right bias Adjustment method: With the power turned off, take a
5mm hexagon wrench and turn the right rear roller bolt 1/4 turn to the right
to tighten the running belt. Then the machine is powered on and the test
running belt is centered. Follow this method until the running belt is loosely
adjusted to the center.
The running belt will be loose after using it for a period of time. If the
running belt is too loose, the running belt will slip during use. Adjustment
method: With the power turned off, take a 5mm hexagonal wrench and turn the
left and right bolts of the rear drum 1/4 turn to the right at the same time
to tighten the running belt. Then the machine is powered on to test the
tightness of the running belt. Follow this method until the tightness of the
running belt is moderate.
Note: When you use a treadmill, the pressure on the running belt is not
balanced due to the different force exerted by the two feet during running,
causing the running belt to deviate from the center. This kind of deviation is
normal. When no one is running on the running belt, it will return to the
center. The running belt cannot be adjusted too tight. This will damage the
running belt, increase the pressure on the front/rear rollers, cause damage to
the roller bearings, etc., cause abnormal noise or other problems.
12
2.Adding Lubricant To The Treadmill
The treadmill has been pre-lubricated at the factory. However, due to the
significant impact of friction between the running belt and the running board
on the product’s lifespan and performance, lubricant must be added as prompted
by the machine.
Lubrication Operation:
1. Cut open the seal of the oil bottle and cut a small opening in the cap of
the oil bottle (just enough to squeeze out the oil smoothly)
2. Lift up the running belt 3. Set the machine to a speed of 1.0 km/h,
align the mouth of the oil bottle with the lubrication guide hole, and squeeze
out an appropriate amount of oil, about 20ml each time 4. After adding the
silicone oil, let the machine run for about 3 minutes. Once the silicone oil
is evenly distributed on the running belt, lubrication is complete
Note: Pay attention to safety when refueling operation, hands should not touch the moving parts
13
9 ERROR CODES
Error Codes
Causes
Solutions
1. Check that the connection between the
electronic meter and the controller is not
Poor communication
properly connected.
E01
between electronic meter 2. The main IC of the controller contacts
and controller
badly and is re-tightened.
3.Controller power supply abnormal,
change controller
1.If the motor is open or in bad contact,
Explosion-proof and
replace the motor or check the connecting
E02
impact-proof protection terminals.
2.Power tube breakdown, replace it or the
controller.
E05
Over current protection 1.Overload.
2.The resistance of the treadmill is too
heavy and needs to be lubricated.
E06
Overload protection
3.The motor is damaged, replace it.
1. Check if the connection between the
electronic watch and the controller is
Keyboard and panel
poorly connected.
E10
control connection
2. The controller plug is not in good contact
communication failure and is re-inserted.
3. The controller power supply is abnormal
and the controller is replaced.
14
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>