LiFE 221-0119 Rainforest Bamboo Edition User Manual
- June 1, 2024
- LIFE
Table of Contents
Rainforest Bamboo Edition
USER MANUAL
221-0119 Rainforest Bamboo Edition
Bamboo weather station with wireless outdoor sensor and clock with alarm
function
PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS.
Read the operating instructions carefully before putting the appliance into
operation and keep the instructions, the receipt and, if possible, the box
with the internal packing. If you give this device to other people, please
also pass on the operating instructions. USER MANUAL SYMBOLS
Important information for your safety is specially marked. It is essential to
comply with these instructions in order to avoid accidents and prevent damage
to the machine:
WARNING: This sign warns you of dangers to your health and indicates
possible injury risks.
CAUTION: This sign refers to possible hazards to the machine or other
objects.
NOTE: This sign highlights tips and information
SAFETY INSTRUCTIONS
The device must be used with due care and you must follow the basic safety instructions as follows:
- Keep it the device away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges.
- Do not immerse the device in water or any other liquid.
- The device is designed exclusively for private, domestic use and for the envisaged purpose.
- This device is not suitable for commercial use.
- To ensure the safety of your children, please keep away from all packaging materials such as plastic bags, boxes, foil etc.
- CAUTION: Do not allow babies and young children to play with the packaging materials. Risk of suffocation!
- If you do not intend to use the device for a long time, remove the battery before storage to avoid a fluid leakage.
FEATURES:
Weather station with wireless outdoor temperature measurement unit
- Indoor and outdoor thermometer
- Indoor temperature measuring ranges: 0°C (32°F) ~ 50°C (122°F)
- Outdoor temperature measuring ranges: -20°C (-4°F) ~ 60°C (140°F)
- Indoor and outdoor hygrometer: measuring ranges 20% – 95% RH
- Display lowest / highest outdoor temperature and humidity records (Lo / Hi)
- Display temperature and humidity trend
- Barometric pressure measuring ranges: 600 hPa/mb~1100 hPa/mb (17.72 inHg~32.50 inHg & 450.0mmHg~825.0mmHg)
- Display records of the barometric pressure in the past 12 hours
- Display barometric pressure trend
- Weather forecast and display with 7 icons: Sunny, Partly cloudy, Cloudy, Rainy, Heavy rainy, Snowy, Heavy Snowy
- Temperature measurement unit: °C or °F
- Barometric pressure measurement unit: hPa/mb or mmHg or inHg
- Frost alert
- Lunar phases display
- Digital clock display (12/24h)
- Date and weekday display ( 8 languages available: English, German, Italian, French, Russian, Spanish, Netherlands and Danish)
- Alarm and snooze function
- LCD display with LED backlight
- Dimensions: 164.5 x 124 x 53mm
- Power supply: included adapter DC 5V 200 mAh or 2 x AA (not incl.)
Wireless remote outdoor sensor
- Transmission frequency: 433.92MHz
- Range of transmission: max. 60m (200ft)
- Easy to install with practical stand support or wall-mounted
- Dimensions: 97 x 50 x 32mm
- Power supply: 2 x AA (not incl.)
WEATHER STATION DISPLAY
Part A- LCD Display LA T N ¥ .
Al: Time
A2: Weekday
A3: Date
A4: Outdoor Temperature display
A5: Alarm icon
A6: Indoor sensor icon
A7: Outdoor sensor icon
A8: Indoor Temperature display
A9: Indoor minimum/maximum temperature display
A10: Indoor Humidity display
A11: Indoor minimum/maximum humidity display e meamar
A12: Barometric pressure display
A13: Records of the barometric pressure for the past 12 hours
A14: Lunar phases
A15: Outdoor humidity display
A16: Outdoor minimum/maximum humidity display
A17: Frost alert icon
A18: Outdoor minimum/maximum temperature display
A19: Outdoor temperature alert icon
Part B – Buttons ( rear side) and power supp!
B1: “SNOOZE/LIGHT” button
B2: “ALERT” button
B3: “RESET” button
B4: “ALARM” button
BS: “+” button
B6: “MODE” button
B7: DC-POWER input
B8: “-” button
BO: Battery compartment
Part C -Wireless Outdoor Sensor:
C1: LCD display – Outdoor temperature
C2: LCD display – RF icon
C3: LCD display – Outdoor humidity
C4: Indicate LED light for RF
C5: “C/°F” button
C6: “TX” button
C7: Battery compartment
BATTERY INSTALLATION:
- Open the battery compartment cover at the wireless outdoor sensor.
- Insert the batteries with the right polarity [ “+ and -]
- Connect the included power supply to the weather station. When you connect the power supply to the mains all the icons on the LCD display will briefly light up for 3 seconds, and you will hear a beep tone, detecting indoor temperature & humidity.
- The weather station will now start the connection with the wireless outdoor sensor. This operation lasts approximately for 3 minutes. An icon of a RF antenna will flash on the “outdoor sensor icon” of the receiver.
SETTING TIME:
-
Press and hold the “MODE” button for 2 seconds and the 12/24 hour mode display will start to flash.
Now use “+” and “~” buttons to set the correct 12/24 hour mode. Press the “MODE” button to confirm your setting. -
The temperature display (°C) will start to flash. Now use “+” and “-” buttons to set the temperature unit in °C or °F. Press the “MODE” button to confirm your setting
-
The barometric pressure display (mb/hPa) will start to flash. Now use “+” and “-” buttons to set the pressure unit in mb/hPa or inHg or mmHg. Press the “MODE” button to confirm your setting.
-
The hour display will start to flash. Now use “+” and “-” buttons to set the correct hour. Press the “MODE” button to confirm your setting.
-
The minutes display will start to flash. Now use “+” and “-” buttons to set the correct minutes. Press the “MODE” button to confirm your setting.
-
The month and date display will start to flash. Now use “+” and “-” buttons to set the date display either on Month/Date or Date/Month. Press the “MODE” button to confirm your setting.
-
The year display will start to flash. Now use “+” and – buttons to set the correct year. Press the “MODE” button to confirm your setting.
-
The month display will start to flash. Now use “+” and “-” buttons to set the correct month. Press the “MODE” button to confirm your setting.
-
The date display will start to flash. Now use “+” “MODE” button to confirm your setting.
-
The language selection for the weekday display will start to flash. Now use “+” and -” buttons to select a language (advise below table). Press the “MODE” button to confirm your setting. The setting procedures just finish and entering the clock mode.
**NOTE: After 20 seconds without pressing any button, the clock switches
automatically from “Set” mode to “Normal Time” mode.
SETTING DAILY ALARM:**
- Press once the “ALARM” button, LCD display shows the icon, indicating the activation /deactivation of the alarm function.
- Press and hold the “ALARM” button for 2 seconds until the hour display of the alarm time starts to flash. Use the “+” and “-“ buttons to set the required hour. Press the “ALARM” button to confirm your setting.
- The minute display of the alarm time starts to flash. Use the “+” and – buttons to set the required minutes. Press the “ALARM” button to confirm your setting. The setting procedures just finish and entering the clock mode.
NOTE:
- After 20 seconds without pressing any button, the clock switches automatically from “Set” mode to “Normal Time” mode.
- The alarm will ring for 2 minutes if you do not deactivate it by pressing any button. If you don’t deactivate it by pressing any button the alarm will be repeated automatically after 24 hours
- The alarm (crescendo, duration: 2 minutes) rises its volume 4 times while it rings.
SWITCHING OFF THE ALARM:
Press any button except the “SNOOZE/LIGHT” button to stop the alarm’s
ringing. It is not necessary to reactivate the alarm. The alarm time switches
automatically the next day same time.
AUTOMATIC SNOOZE FUNCTION:
Press the “SNOOZE/LIGHT” button while the alarm is ringing to activate the
SNOOZE mode.
The alarm will ring again after 5 minutes.
LUNAR PHASES:
- The weather station displays automatically the current lunar phase.
TEMPERATURE/HUMIDITY/ BAROMETRIC PRESSURE AND TEMPERATURE/HUMIDITY TREND DISPLAY
- The current indoor temperature/humidity/barometric pressure and the temperature/humidity indoor trend are shown in the LCD display.
- After successfully connecting with the outdoor sensor, the weather station can display the outdoor temperature/humidity and the outdoor temperature/humidity trend.
- You may see the following displays:
The temperature/humidity is increasing.
The temperature/humidity is remaining constant.
The temperature/humidity is decreasing.
RF TRANSMISSION PROCEDURE:
- The outdoor sensor will automatically transmit temperature and humidity signal to the weather station after the batteries are inserted.
- If the weather station fails to receive transmission from the outdoor sensor (“- ~”display on the LCD), press and hold the “-” button for 3 seconds to receive transmission manually. RF icon * ” will flash on the LCD.
MINIMUM/MAXIMUM TEMPERATURE/HUMIDITY DISPLAYS:
- When the indoor / outdoor temperature and humidity are shown in the LCD display, temperature/humidity maximum/minimum, are also recorded at the same time. The LCD display shows maximum (Hi) and minimum (Lo) records for indoor / outdoor temperature and humidity.
- The maximum/minimum temperature and humidity daily records starts at 00:00 (automatic clearance).
NOTE:
- If the temperature is below ranges “LL.L” will be displayed. If the temperature is above ranges “HH.H” will be displayed.
- If the barometric pressure is below ranges “LLLL” will be displayed. If the barometric pressure is above ranges “HHHH” will be displayed.
OUTDOOR TEMPERATURE ALERT SETTING:
- Press and hold the “ALERT” button for 2 seconds until the icon for the “Temperature Alert” starts to flash.
- The icon of maximum limit of the Temperature alarm will start to flash. Use the “+” and “-” buttons to set the maximum temperature. Press “ALERT” button to confirm your setting.
- The icon of the minimum limit of the Temperature alarm will start to flash. Use the “+” and “-” buttons to set the minimum temperature. Press “ALERT” button to confirm your setting and finish the setting procedure.
TEMPERATURE AND FROST ALERT
-
To activation / deactivation the temperature alert or frost alert briefly press the “ALERT” button.
-
If the frost alert is activated the matching icon (A17) displays next to the outdoor temperature. The alarm signal sounds at ~1°C to + 3 C (or +30°F to + 37°F).
If the temperature alarm is activated the matching icon (A19) displays next to the outdoor temperature.
The alarm signal rings at the adjusted values. -
If the temperature and frost alarm are activated, both icons display ( A17 and A19).
NOTE: If the temperature is below measuring ranges “LL.L” will be
displayed. If the temperature is above measuring ranges “HH.H” will be
displayed.
BAROMETRIC PRESSURE OF THE LAST 12 HOURS:
Press the “+” button repeatedly to see the barometric pressure values of the
last 12 hours
– OHR = present barometric pressure
– 1HR = barometric pressure one hour earlier
– 2HR = barometric pressure two hours earlier, etc.
Note :
- After 20 seconds without pressing any button the clock switches automatically from setting mode to present barometric pressure.
- The weather station can display the barometric pressure trend.
- You may see the following displays:
The barometric pressure will increase.
The barometric pressure will remain constant.
The barometric pressure will decrease.
WEATHER FORECAST
- The weather station displays the following weather symbols:
- The weather symbols indicate the weather forecast over the next eight hours and not the current weather conditions.
Note :
- Please note the weather forecast from your local weather forecasting service into account as well as the forecast from your weather station. If there are discrepancies between the information from your device and from the local weather forecasting service, please take the advice of the latter as authoritative.
- The weather forecast is based on the evaluation of fluctuations in the barometric pressure and may deviate from the actual weather conditions.
BACKLIGHT
- When you use the device with the power supply, press “SNOOZE/LIGHT” button to choose off / low / high backlight brightness.
- When the device is battery-powered, press the “SNOOZE/LIGHT” button and the backlight will light up for 15 seconds.
CLEANING AND CARE
- Never immerse device in water or in any other liquid.
- Wipe the housing and the screen of the device with a soft cloth.
STORAGE
- Always store the device in a safe and clean place. For the better protection of the device, store it in its original packaging.
- If you do not intend to use the device for a long time, remove the battery before storing it to prevent leakage of the battery fluid.
DECLARATION OF CONFORMITY
Hereby, SUN SA declares that the radio equipment type LIFE RAINFOREST is in
compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: www.sun.gr
DISPOSAL OF APPLIANCE AND ACCESSORIES
This symbol appearing on the product, its accessories or accompanying manuals
indicates that the mmm product and its electronic accessories should not be
disposed of with other household trash.
In order to avoid possible harmful effects on the environment or health due to
uncontrolled waste disposal, please separate these products from other types
of waste and recycle them.
Household users should contact either the store where they purchased this
product or their local services for details of where and how they can return
these products for environmentally safe recycling.
DISPOSAL OF BATTERIES
This marking on the battery, manual or packaging indicates that the batteries
of this product should not be disposed of with other household waste at the
end of their life cycle.
Taviag Kahox@pi, 570 09 @eooaovikn,
EAGSa, THA. +30 2310 700.777
e-mail:info@sun.gr –
www.life.gr
Tonias Kalochori, 570 09
Thessaloniki, Greece, TEL. +30 2310 700.777
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>