Bistee Wireless Doorbell Chime User Manual

Bistee Wireless Doorbell Chime

Specifications

• Receiver working voltage: Standard AC voltage
• Sound pressure level: Adjustable through 5 volume levels
• Receiver AC power consumption: Low power consumption
• Working frequency: Standard frequency range
• Transmitter battery type: Standard transmitter battery
• Operating temperature: Suitable for indoor use
• Battery lifetime: Long-lasting battery life
• Wireless range: 300-400m in open area
• Waterproof: Transmitter is weatherproof

Product Usage Instructions

Powering the Indoor Chime Receiver

1. Plug the receiver into a standard power outlet. Ensure it is away from other electrical equipment for optimal performance.

Powering the Transmitter
Peel off the insulating sheet from the transmitter and push the button to activate it (flashing blue light indicates operation).

Sound Volume Control
Use the volume control button on the receiver to adjust sound levels. There are 5 volume levels including a MUTE mode. Pairing a Transmitter to Receiver

1. Select your desired ringtone on the receiver.
2. Long press the Volume button for 5 seconds or press Volume & Down Button together until a Ding-dong is heard and LED starts flashing for pairing mode.
3. Press the transmitter button to send a signal. Upon successful pairing, the chosen ringtone will play automatically.

Setting Ringtone
Choose from 58 ringtones by pressing Up or Down Button on the receiver. Follow steps (2)-(3) above to sync the new ringtone with a transmitter.

FAQ

1. Q: How many transmitters can be paired with one receiver?
   A: One receiver can pair with up to 58 transmitters, allowing flexibility in multiple locations.

2. Q: Is the transmitter waterproof?
   A: The transmitter is weatherproof, suitable for outdoor use.

3. Q: Can I change the ringtone for different transmitters?
   A: Yes, each transmitter can have a different ringtone from the selection of 58 ringtones available.

4. Q: What is the wireless range of the doorbell?
   A: The wireless range is 300-400m in an open area, providing coverage for various settings.

Introduction
Thank you for purchasing our product!
Our new wireless doorbell use advanced technology to make sure detection signals more accurate. We dedicates to improve your living quality and simplify your lifestyle as development direction, We have been committed to researching and developing more high quality and competitive products. This wireless transmitter and plug-in receiver has a 300-400m range in open area. It is great for multiple places, including home, apartment, office, classroom, hospital, ect. Our wireless doorbell receiver is expandable, which allows you to pair with various transmitters in different locations in your home or office. One receiver can pair with up to 58 various transmitters and each transmitter can be set to different ringtone(58 ringtones to choose). So you can know where the signal is coming from in different locations.

Overview

Plug-in Receiver
The receiver has an LED Indicator on the front, 3 buttons on the side, Up Button, Down Button and Volume Button. The AC plug and Speaker are on the back.

Transmitter/ Push Button
The transmitter/push button has a rubber button on the surface that illuminates an LED when you press it.

Technical Specification

Operating Instructions

1. POWERING THE INDOOR CHIME RECEIVE Plug the receiver into the outlet. The receiver will perform better if kept away from other electrical equipment (eg: TV, microwave.)

2. POWERING THE TRANSMITTER
   Peel off the insulating sheet, push the button to ensure the transmitter is working fine
   (the button is flashing blue light).

3. SOUND VOLUME CONTROL
   Press the volume control button on the receiver to cycle through 5 volume levels, including MUTE mode.

4. PAIRING A TRANSMITTER TO RECEIVER

5. Please select your favorite ringtone before pairing.

6. Long press the Volume button for 5 seconds or (Short Press the Volume Button & Down Button together) until a Ding-dong is heard and the LED indicator starts flashing to enter into pairing mode.

7. Press the transmitter button to send a signal to receiver. when the pairing ( ringtone sync ) is successful, the receiver will play the selected ringtone automatically.

8. SETTING RINGTONE
   There are 58 ringtones to choose from.

9. Press Up Button or Down Button to choose your favorite ringtone, the receiver playing is the ringtone selected.

10. Please follow the pairing steps (2)-(3) below to sync the new ringtone. the new ringtone will be set for the most recently synced transmitter.

11. The ringtone can be set different for transmitters.

12. TWO OR MORE TRANSMITTERS PAIRING If you would like to pair with more transmitters, please repeat the Step 4.

13. RESET
    Press Down Button for 5 seconds to reset receivers to default. When receiver sounds ‘Ding Dong’ with LED flashing that means the reset was successful. Then you can follow the STEP 4 to pair again.

Please Note:

1. Pairing mode will last only 5 seconds before timing out. Ensure you activate the transmitter in 5 seconds or the process will have to start again.

Installation

Transmitter battery installation
The battery is pre-installed in the transmitter. Insert the Screwdriver into the allotted slot. Twist the Screwdriver clockwise to open. Peel off the insulating film on the button cell then close the cover.
Note: please notice the polarity of the button cell when replacing the battery.

Transmitter installation

1. Adhesive tape: apply the double-sided adhesive tape on the back of the transmitter. Remove the outer side of the tape and attach the transmitter in the desired location on the wall and press hard for 30 seconds.
   Note: Please clear the surface of the wall before install.

2. Screws and anchors: there are screw locator knockouts on the back of the transmitter; punch these out to allow the screws to pass through and fix the transmitter with the anchors in the desired location on the wall.

Troubleshooting

again. Make sure the contacts are good.
The battery power is low| Replace with new battery
The receiver does not respond to the transmitter| Unsuccessful pairing| Pair the transmitter and receiver again
The receiver only lights but NO sound| Mute mode is ON| Push the Volume Button to make a sound

WARRANTY AND AFTER-SALE SERVICE
There is 24 months warranty for our product. If you have any product using question, please do not hesitate to contact us through your order, our 24-hour email standby.

Chimes List

_ Chimes List

1. Ding-dong, Ding-dong
2. Ding-dong, Ding-dong
3. Ding-dong, Ding-dong
4. Ding-dong, Ding-dong
5. Corsica Doorbell|
6. Ding-dong
7. Ding-dong
8. Ding-dong
9. Ding-dong Chime
10. Ding-dong
11. Ding-dong
12. Ding-dong Chime
13. Alarm Sound Effect
14. Barking
15. Hello Welcome
16. Horn sound
17. Brake sound
18. Westminster Chimes
19. Westminster Chimes
20. Westminster Chimes
21. Westminster Chimes
22. Big ben electronic doorbell
23. Marimba
24. Alerting Ringtone
25. Smooth alert ringtone
26. Marimba Ringtone
27. Flute sound doorbell|
28. Harp Ringtone
29. Guitar rhythm
30. Electric piano
31. Starry night
32. Marimba
33. Alerting Ringtone
34. Electric Ringtone
35. Alerting Ringtone
36. Piano rhythm
37. Butterfly Dream
38. Dance beat
39. Twilight Sms Tone
40. Classical organ
41. Joy to the world
42. Super Ringtone
43. Let It Snow
44. Fast Car
45. Dingdong merrily on high
46. Jingle bells
47. Waltz of the flowers
48. For Alice
49. The William tell overture
50. The cuckoo waltzes
51. Going home
52. Victory
53. Happy birthday
54. Fantaisie Impromptu
55. Yesterday Once More
56. Eva’s Polka
57. Russe Dance
58. Souvenirs Denfance

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>