GAMEMAX 6675 Vista Micro ATX Gaming Cases User Manual
- June 1, 2024
- GAMEMAX
Table of Contents
GAMEMAX 6675 Vista Micro ATX Gaming Cases
Product Information
Specifications:
- Material: Tempered glass, Steel
- Compatibility: 3.5″ HDD, 2.5″ SSD
- Fan Cooling System: Top – 3x120mm, 2x140mm (optional), Rear – 1x120mm (optional)
- Liquid Cooling System: Top – 120/140/240/280/360mm (optional), Rear – 120mm (optional)
Product Usage Instructions
Assembly:
- Remove the side panels carefully.
- Insert the PSU from the left side and secure it with screws.
- Insert the Motherboard IO Shield, place the motherboard in position, and secure it with screws.
- Install the GPU card after removing the PCI-E bracket.
- Compatible installation position for 3.5″ HDD and 2.5″ SSD.
- Install the SSD in the designated slot.
Cooling System:
Ensure proper airflow direction inside the chassis for optimal cooling performance.
Fan and Liquid Cooling Options:
Follow the recommended fan and liquid cooling configurations for efficient cooling of your components.
Frequently Asked Questions
Q: Can I install additional fans for better cooling?
A: Yes, you can add optional fans as specified in the product specifications for improved cooling performance.
Q: Is it possible to install a liquid cooling system in this chassis?
A: Yes, the chassis supports liquid cooling systems with compatible radiator sizes as mentioned in the specifications.
Package Content
Connectors
I/O Panel
Exploded View
- Tempered glass front panel
- Tempered glass left side panel
- Right side panel
- Chassis
- HDD bracket
- Magnetic dust filter on top
- Dust filter at the bottom
- Magnetic dust filter on side
Installation Guide
-
Remove the side panels.
-
Insert PSU from left side, secure with screws.
-
Insert the MB IO Shield, and then place the motherboard on the corresponding position and secure with screws.
-
Remove the PCI-E bracket; Install the GPU card.
-
3.5″ HDD hard drive installation position is compatible with 2.5″ SSD.
-
Install 2.5″ SSD.
-
Fan Cooling System:
Top: 3x120mm, 2x140mm(optional) M/B Cover: 2x120mm(optional) PSU Cover: 2x120mm(optional) Rear: 1x120mm(optional) -
Liquid Cooling System:
Top: 120/140/240/280/360mm(optional) M/B Cover: 120/240mm(optional) Rear: 120mm(optional)
Airflow Direction
Pay attention to the airflow direction inside the chassis.